Panasonic Home Theater Audio System Sc-htb770 Quick Start Guide

							RQCA2105-1
Quick Start GuideHome Theater Audio System SC-HTB770
Step 1: Choose the configuration that is right for you
Place the speakers horizontally
Place the front speakers vertically
Fully insert the wire.
r: White
s: Blue line
RedWhite To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Push
Green Press into the 
groove.≥Tighten screws securely.


1Fully insert the 
wire.
r: White
s: Blue line
Push Speaker placement
Speaker with,
Red connector:
To the right
White connector:
To the left
Green connector:
In the center To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Push Green ≥Tighten screws securely.
Press the cable 
into the groove.Press the cable into the groove.
Red or White
If you have any questions, contact:
U.S.A. and Puerto Rico: 1-800-211-PANA (7262)
Mon-Fri: 9 ams9 pm (EST) Lunes-Viernes
Sat-Sun: 10 ams7 pm (EST) Sabado-Domingo
www.Panasonic.com/helpCanada:
Telephone: 1-800-561-5505
SC-HTB770PPC_RQCA2105_mst.fm  Page 5  Friday, January 25, 2013  8:43 PM 
						

							HDMI (ARC) 
Audio Return Channel:
Allows a home theater system to receive and play audio from the TV through a HDMI cable without 
additional wiring.
HDMI cable is required for VIERA Link “HDAVI Control”.
 Turn on the active subwoofer.
 On the TV, select this home theater system as the TV’s speakers from the VIERA 
Link menu.
 Press [iVOLj] on the TV’s remote control to adjust the volume.
§ Operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.
 Turn on the main unit, active subwoofer and the TV.
 Press [INPUT SELECTOR] to select the TV sound.
 Press [iVOLj] to adjust the volume.
Step 2: Connect the cables
Do not connect the AC power supply cord to the main unit and the active 
subwoofer until all other connections are completed.
When the TV is HDMI (ARC) compatibleWhen the TV is non HDMI (ARC) compatible
AC IN
DIGITAL
AUDIO
IN
SPEAKERS/HAUT-PARLEURS666RLCENTER
TV 
(ARC)AV OUTTV 
(ARC)AV OUT
HDMI IN
(ARC)
TV
Main unit HDMI cable
Be sure to connect to the 
TV’s ARC compatible 
terminal. (Refer to the TV’s 
operating instructions.)
Red White
Green
AC IN
DIGITAL
AUDIO
INTV(OPT1)
SPEAKERS/HAUT-PARLEURS666RLCENTER
TV 
(ARC)AV OUTTV 
(ARC)AV OUT
DIGITAL
AUDIO
INTV(OPT1)
HDMI INOPTICAL
OUT
TV
Main unit
HDMI cable
Optical digital 
audio cable
Red White
Green
Using this system
When the TV is VIERA Link
TM
 “HDAVI Control
TM
” or 
HDMI CEC compatible
≥If the TV is not a Panasonic TV, set the “Receiver” or “External speakers” to “On”.When the TV is not VIERA Link
TM
 “HDAVI Control
TM
” 
or HDMI CEC compatible
≥If there is sound from the TV’s speakers too, then use the TV’s remote control to lower the volume to 
minimum.For wall mounting and other details, be sure to refer to the Owner’s Manual.
e.g. TV remote control
INPUT
SELECTOR
e.g. TV remote control
SC-HTB770PPC_RQCA2105_mst.fm  Page 6  Friday, January 25, 2013  8:43 PM