Panasonic Home Network System Access Keypad Kx Hnk101 Operating Instructions

2
Place the mounting bracket against the wall and determine where the
mounting bracket will be installed. Mark the screw openings on the wall.
RRefer to the information below. The dotted lines indicate where the edges of
the keypad will be in relation to the mounting bracket. 16 mm (5/8 inches)
59 mm (2 5/16 inches)
19 mm (3/4 inches)
Screw openings
6

0 mm (2 11/32 inches) apart
3 Drill pilot holes where you marked the screw openings in the previous step.
RThe screw openings must be 60 mm (2 11/32...

Installing the mounting bracket
Installing the mounting bracket on wooden walls
L
ine up the holes on the mounting bracket with the holes in the wall, then insert
and tighten each screw.
Note:
R Use the supplied screws ( ).
R P

lace the bracket with the  “UP” mark facing upwards. Installing the mounting bracket on gypsum board, ALC (autoclaved
l

ightweight cellular concrete), or concrete blocks
Use the supplied anchors and screws to mount the mounting bracket to the wall.
Note:
R Supplied anchors ø: 5...

3
Insert the anchor into the hole so that it is flush with the wall surface. 4
L
ine up the holes on the mounting bracket with the anchors, then insert and
tighten each screw.
RUse the supplied screws ( ).
R P

lace the bracket with the  “UP” mark facing upwards. Installing the keypad to the mounting bracket
A

ttach the keypad to the bracket.
R Insert the grooves on the keypad to the 4 tabs on the bracket, and then push
down the keypad. For a
ssistance, please visit http://shop.panasonic.com/support
13...

Connecting the AC adaptor
N
ote:
R Use only the supplied Panasonic AC adaptor PNLV226-K.
Connect the AC adaptor plug to the keypad until you hear a click ( A) and connect
the AC adaptor to the power outlet ( B). Note about power connections
AC adaptor connection
R
T

he AC adaptor must remain connected at all times. (It is normal for the adaptor
to feel warm during use.)
R The AC adaptor should be connected to a vertically oriented or floor-mounted
AC outlet. Do not connect the AC adaptor to a...

Using the keypad
Changing the arm mode
1
T
ap the touchpanel to light the arm
mode buttons.
2 Tap the button of the desired arm
mode.
RIf you tap   to disarm the
a

larm system, enter the disarm
PIN (default: “0000”) and then
tap  MOK N.
Note:
R We recommend changing the PIN
from the default before operating the
alarm system. For more information,
refer to the User’s Guide
(page 15).
R When the arm mode is changed with
the keypad, the arm mode icons
displayed on the app will not be
automatically changed....

1
iPhone ®
/iPad ®
Tap   in the app’s home screen.
A
ndroid™ devices
Tap   or press your mobile
d

evice’s menu button in the app’s
home screen.
2 Tap [User’s Guide] .
Note:
R Microsoft® Windows® Internet
Explorer® 8 and earlier versions are
not supported.
R Android 4.1 or later versions are
recommended.
R You can also access the User’s
Guide at the web page listed below. www.panasonic.net/pcc/support/tel/
h

omenetwork/manual/ Specifications
R
S

tandards
DECT (Digital Enhanced Cordless...

FCC and other
i
nformation
This device complies with Part 15 of
the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
Privacy of communications may not be
ensured when using this device.
CAUTION:
Any changes or modifications not
expressly approved by the party
responsible for compliance could void
the user’s authority to...

Customer services
18
For assistance, please visit http://shop.panasonic.com/support Appendix
HNK101_(en_es)_0618_ver.041.pdf   182015/06/18   20:12:06You may also contact us directly at: 1-800-272-7033,Monday - Friday 9 am to 9 pm;  
Saturday - Sunday 10 am to 7 pm, EST. Accessories!
h!p://shop.panasonic.com/support
Customer Services Directory Shop
for all your Panasonic gear
Go to 
Get everything you need to get the most out of your Panasonic products 
Accessories & Parts for your Camera, Phone, A/V...

Limited Warranty (ONLY FOR U.S.A.)
For assistance, please visit http://shop.panasonic.com/support
19Appendix
HNK101_(en_es)_0618_ver.041.pdf   192015/06/18   20:12:06Limited Warranty Coverage (For USA Only)LaborOne (1) Year
Parts
One (1) Year
To submit a new repair request and for quick repair status visit o ur Web Site at
http://shop.panasonic.com/support
Panasonic Products Limited Warranty
Online Repair Request
Mail-In Service--
Online Repair Request
If your product does not work properly because of a...

20
For assistance, please visit http://shop.panasonic.com/support Appendix
HNK101_(en_es)_0618_ver.041.pdf   202015/06/18   20:12:06Limited Warranty Limits and Exclusions(As examples, this excludes damages for lost time, travel to and from th e servicer, 
loss of or damage to media or images, data or other memory or recorde d content. 
The items listed are not exclusive, but for illustration only.)This warranty ONLY COVERS failures due to defects in materials or w orkmanship, 
and DOES NOT COVER normal...