Panasonic High Definition Video Camera Ag-hsc1up Operating Instructions

101VQT1F36
With a computer
1Double click the   icon in task 
tray displayed on the computer.
Hardware disconnect dialogue appears.
≥Depending on your computer’s settings, 
this icon may not be displayed.
2Select [USB Mass Storage 
Device] and click [Stop].
3Verify [MATSHITA HDC-SD1 USB 
Device] is selected and click [OK].
Click [Close], and you can safely disconnect 
the cable.
≥Do not disconnect the USB cable while the card 
access lamp is lit ( appears on the LCD 
monitor) as it may damage the data.
To...

102VQT1F36
With a computer
Using HD Writer Ver1.0E for 
SD1
Using HD Writer Ver1.0E for SD1, you can copy 
images recorded on this unit to the hard disk of 
the computer. When you want to playback 
images, write back the images from the hard disk 
of the computer to an SD card. You can then 
connect this unit to a TV to watch the images. 
(l80)
≥When using HD Writer Ver1.0E for SD1, log on 
to your computer as Administrator with a login 
name equally authorized. If you log on with a 
login name other...

103VQT1F36
With a computer
6Click the [Start copying] button.
≥A confirmation message appears. Click 
[Yes] and copying starts.
≥After copying is complete, a message 
appears. If [Yes] is clicked, all the motion 
pictures and still pictures on the SD card 
will be deleted.
ªWriting back to an SD card
≥Insert an SD card in this unit and format the 
card. (l79)
(Use an SD card that can be used for motion 
picture recording. (l26))
Please be aware that if an SD card is 
formatted, then all the data recorded...

With a computer
104VQT1F36
If using Macintosh
≥Even if the system requirements mentioned in these operating instructions are fulfilled, some personal 
computers cannot be used.
≥Apple, Mac OS is either registered trademarks or trademarks of Apple Computer, Inc. in the United 
States and/or other countries.
≥PowerPC is a trademark of International Business Machines Corporation.
≥Intel
® CoreTM Solo and Intel® CoreTM Duo are either registered trademarks or trademarks of Intel 
Corporation in the United...

105VQT1F36
Others
Others
Menus and Indications
Recording menus
ª[BASIC]
[SCENE MODE] (l63)
[D.ZOOM] (l52)
[O.I.S.] (l59)
[GUIDE LINES] (l59)
[CLOCK SET] (l41)
ª[VIDEO]
[REC MODE] (l47)
[FADE COLOR] (l55)
[WIND CUT] (l60)
[ZOOM MIC] (l53)
[MIC LEVEL] (l60)
[AGS] (l44)
ª[PICTURE]
[PICT. QUALITY] (l51)
[FLASH LEVEL] (l58)
[SHTR EFFECT] (l50)
ª[ADVANCED]
[REC LAMP] (l107)
[ZEBRA] (l62)
[COLOR BAR] (l62)
[MF ASSIST] (l64)
ª[SETUP]
[FORMAT CARD] (l79)
[DISPLAY] (l107)
[DATE/TIME] (l41)
[DATE FORMAT] (l41)...

106VQT1F36
Others
Playback menus
(motion picture playback)
ª[PLAY SETUP]
[PLAY MODE] (l71)
[REPEAT PLAY] (l71)
[RESUME PLAY] (l72)
[SCENE PROTECT] (l75)
[GUIDE LINES] (l59)
ª[SETUP]
[FORMAT CARD] (l79)
[DISPLAY] (l107)
[DATE/TIME] (l41)
[DATE FORMAT] (l41)
[POWER SAVE] (l107)
[BEEP SOUND] (l107)
[LCD SET] (l42)
[COMPONENT OUT] (l84)
[HDMI RESOLUTION] (l82)
[EZ Sync] (l87)
[TV ASPECT] (l80)
ª[LANGUAGE] (l42)Playback menus
(still picture playback)
ª[PLAY SETUP]
[SCENE PROTECT] (l77)
[DPOF SET] (l78)...

107VQT1F36
Others
≥Underlined items are the initial shipping 
condition.
ª[REC LAMP]
The recording lamp lights during recording and 
flashes when the unit receives a signal from the 
remote control or when the self-timer is counting 
down. When this is set to [OFF], it does not light 
during recording.
ª[DISPLAY]
The screen indications are selected as shown in 
the illustration below.
ª[POWER SAVE]
[OFF]:
The power saving function is not activated.
[5 MINUTES]:
When about 5 minutes have passed without...

108VQT1F36
Others
ªRecording indications
Motion picture recording
Still picture recording
(when the PHOTO SHOT button is pressed 
halfway)
Indications
Remaining battery power
30minRemaining battery time
R30minRemaining time for motion 
picture recording
0h00m00sElapsed recording time
DEC 15 2007Date indication
3:30 PMTime indication
¥/; (Red)Recording/writing to a card
; (Green)Recording pause
Auto mode
Manual mode
MFManual focus
10tZoom magnification indication
Backlight compensation
Image stabilizer...

109VQT1F36
Others
ªPlayback indications
Motion picture playback
Still picture playback
ªPC connection indications
ªConfirmatory indications
1Playback
;Pause
5/6Cue/Review playback
7/8Last/first scene paused
9/:Skip playback
D/ESlow motion playback
;1/2;Frame-by-frame playback
0h00m00sPlayback time
Play mode
All scenes
Scenes recorded on the 
selected date
No.10Scene number
Volume adjustment
Repeat playback
Resume playback
100-0001Still picture folder/file number 
display
PictBridgeWhen a printer...

Others
11 0VQT1F36
Messages
CANNOT RECORD.Data writing to the SD card has failed.
NO DATA.There are no motion pictures or still pictures recorded on the SD 
card.
If this message appears although data is recorded on the SD card, 
the condition of the card is probably not stable.
Turn off the power and then turn it on again.
CANNOT BE USED DUE 
TO INCOMPATIBLE DATA.The recording format is different so it cannot be used. Save the data 
on the SD card to a computer, then use the SD card after formatting...