Panasonic High Definition Plasma Display Th 152ux1 Operating Instructions

11
Accessories Supply
Accessories
Fixing band × 3
TMME203Nut cover × 3
(M20)Nut cover × 3
(M16)
Batteries for the Remote 
Control Transmitter
(R6 (AA) Size × 2)Remote Control Transmitter
N2QAYB000560Operating Instruction book
Check that you have the accessories and items shown
Remote Control Batteries
Requires two R6 (AA) batteries.
1. Pull and hold the hook, then open the battery cover.2. Insert batteries - note correct polarity ( + and -).
Helpful Hint:
For frequent remote control users, replace old...

12
Connections
Video equipment connection
12
Pass the attached cable 
fi  xing band through the clip 
as shown in the fi  gure.To secure cables connected to Terminals, wrap the cable  fi xing band around them 
then pass the pointed end through the locking block, as shown in the  fi gure.
While ensuring there is suf fi cient slack in cables to minimize stress,  fi rmly 
bind all cables with the supplied  fi xing band.
To tighten: To loosen:
Pull Pull
Push the catch
 
 Cable fi  xing
  Secure any excess cables...

13
Power On / Off
Press the  button on the remote control to turn the Plasma Display off.
Power Indicator: Red (standby)
Press the 
 button on the remote control to turn the Plasma Display on.
Power Indicator: Green
Turn the power to the Plasma Display off by pressing the 
 switch on the 
unit, when the Plasma Display is on or in standby mode.
Note: 
During operation of the power management function, the power indicator t\
urns 
orange in the power off state.
Turn on the breaker dedicated to the Plasma...

14
Power On / Off
Italiano  
Español 
 
ENGLISH (US) 
English (UK) 
Deutsch 
Français   
OSD Language
Set
Select
When 3D images will be viewed by unspeci fi ed number of   
people or used for commercial applications, someone in
authority should convey the following precautions.
These precautions should be followed in the home as well.
3D Viewing/ 3D Content/ Viewing distance/ 3D Eyewear 
recommendations
 - To enjoy 3D images safely and comfortably, please
   read the Operating Instructions fully.
3D...

Press to select the input signal to be played back from the equipment 
which has been connected to the Plasma Display.HDMI input terminal in HDMI 1.
HDMI input terminal in HDMI 2.
Input terminal in Terminal Board.*
4k2k HD-SDI input terminal in SDI IN.
4k2k DVI-D input terminal in DVI-D IN.
PC input terminal in PC IN.
*  “SLOT INPUT” appears when the Terminal Board is connected.
INPUT
HDMI1
HDMI2
SLOT INPUT
4K-SDI
PC 4K-DVI
Using dedicated buttons for input selection
MENU
ENTER/
INPUT
Press to select...

16
Normal Viewing Picture
Pos. /Size
Setup
Basic Controls
Main Unit
INPUT MENU
ENTER/
Right side  surface
Remote control sensor
Main Power On / Off Switch
Power Indicator
The Power Indicator will light.
• Power-OFF .... Indicator not illuminated (The  unit will still consume some 
power as long as the power 
supply is connected to the 
unit.)
• Standby  ........ Red
• Power-ON ...... Green Up / Down button
When the menu screen is displayed:
▲
  : press to move the cursor up 
▼  : 
press to move the...

17
Basic Controls
Remote Control Transmitter
Standby (ON / OFF) button
The Plasma Display must fi rst be turned
on at the power switch (see page 13).
Press this button to turn the Plasma 
Display On, from Standby mode. Press 
it again to turn the Plasma Display Off 
to Standby mode.
PC button
Press to select PC IN input. 
(see page 15)
SLOT buttons
Press to select SLOT Terminal Board. 
(see page 15)
SDI button, DVI button
Press to select SDI IN or DVI-D IN 
input. (see page 15)
SETUP button
RETURN button...

Remote ControlUnit
1Display the menu screen.                       
Press several times.
Each time the MENU button is pressed, the 
menu screen will switch.
2Select the item.
25 0
0
0
5
Picture
NormalNormaliseNormal
Brightness
Sharpness Picture Mode
Colour Contrast
Hue
Advanced settings Memory save
White balanceNormal
Memory load Memory edit
(Example: Picture menu)
Select. Press.
 Select.
3Set.Adjust.
 Press.
 Adjust.
4Exit the menu.                        Press several times.
Normal Viewing Picture
Pos....

Specifi cations
TH-152UX1
Power Source  200 - 240  V AC, 50/60 Hz
Power Consumption Power on 3700 W
Stand-by condition 0.5 W
Power off condition 0.3 W
Plasma Display panel Drive method : AC type
152-inch, 17:9 aspect ratio
Screen size 134.4” (W) × 70.9” (H) × 152.0” (diagonal) / 
3,416 mm (W) × 1,801 mm (H) × 3,862 mm (diagonal)
(No.of pixels) 8,847,360 (4,096 (W) ×2,160 (H))
[4,096 × 2,160 × 3 dots]
Operating condition Temperature 32°F - 95°F / 0 °C - 35 °C
Humidity 20 % - 80 %
Applicable signals...

Panasonic Solutions Company 
Unit of Panasonic Corporation of 
North America 
Three Panasonic Way 2F-5 
Secaucus, NJ  07094Panasonic Professional Flat Panel DisplayLimited Warranty
Models or Parts Part
Warranty Labor
Warranty
Professional Flat 
Panel Display
LIMITS AND  EXCLUSIONS
There are no express warranties except as listed above.
THE WARRANTOR SHALL NOT BE LIABLE FOR 
INCIDENTAL OR CONSEQUENTIAL DAMAGES 
(INCLUDING, WITHOUT LIMITION, DAMAGE 
TO DISCS) RESULTING FROM THE USE OF THIS 
PRODUCT, OR...