Panasonic High Definition Plasma Display Th 103pf9 Operating Instructions

41
Item Effect Adjustments
Initial VOL 
level
Off On
Press  button to adjust the volume when TV is turned on.
Off  On
Off:  Sets normal volume.
On:  Sets your preferred volume.
Notes:
• 
When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.• You can hear the changed volume regardless of your volume setting before opening the options menu if you 
adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.
Maximum VOL 
level
Off On
Press...

42
Item Effect Adjustments
Button lockOff   MENU&ENTER   On 
Off:  All the buttons at the bottom of the main unit can be used.
MENU & ENTER:
  Locks 
MENU and ENTER/ buttons on bottom face of main unit.
On:  Locks all the button on bottom face of main unit.
Remocon 
User levelOff  User1  User2  User3 
Off:  You can use all of the buttons on the remote control.
User1:
 You can only use , , , , , , ,  buttons on the remote control.
User2:
 You can only use , , buttons on the remote control.
User3: Locks...

43
Shipping condition
This function allows you to reset the unit to the factory setting.
1
2
3
4
Press to display the SET UP menu.
Press to select “OSD LANGUAGE”.
Press and hold till the SHIPPING menu is 
displayed.
Press to select “YES”.
Press to confi rm.
[from the unit]
1  Press the MENU button till the Setup menu is displayed.
2  Press the Volume Up “+” or Down “–” button to select “OSD LANGUAGE”.
3  Press and hold the ENTER button till the SHIPPING menu is displayed.
4  Press the Volume Up “+” or...

44
Troubleshooting
Before you call for service, determine the symptoms and make a few simple checks as shown below.
Symptoms
Checks
Picture Sound
InterferenceNoisy SoundElectrical Appliances
Cars / Motorcycles
Fluorescent light
Normal PictureNo SoundVolume
(Check whether the mute function has been activated on the remote control.)
No PictureNo SoundNot plugged into AC outlet
Not switched on
PICTURE and BRIGHTNESS/Volume setting
(Check by pressing the power switch or stand-by button on the remote...

45
DVI-D/COMPONENT/RGB/PC input signals
∗1: When selected the RGB format and 525p signal input to the Mini D-sub 15P terminal, it is recognized as VGA 60Hz signal.
∗2: When inputted VGA 60Hz format signal from the other than Mini D-sub 15P terminal, it is recognized as 525p signal.
∗3: Based on VESA Standard.
Note: Signals without above specifi cation may not be displayed properly.
Signal nameHorizontal frequency 
(kHz) Vertical frequency 
(Hz) Component / RGB 
/ Mini D-sub 15P DVI-D∗3
(Dot clock (MHz))
1...

46
TH-103PF9UK
Power Source 240 V AC, 50/60 Hz (single phase)
Power Consumption
Power on 1,550 W
Stand-by condition Save OFF 1.5 W, Save ON 1.3 W
Power off condition 0.5 W
Plasma Display panelDrive method : AC type 103-inch,
16:9 aspect ratio
Screen size
89.5” (2,269 mm) (W) × 50.5” (1,277 mm) (H) 
× 103.0” (2,604 mm) (diagonal)
(No.of pixels) 2,073,600 (1,920 (W) × 1,080 (H))
[5,760 × 1,080 dots]
Operating condition
Temperature 32 °F - 104 °F (0 °C - 40 °C)
Humidity 20 % - 80 %
Applicable signals
Color...

47
Memo 

MBS0806A1116
Panasonic Broadcast & Television Systems Company
Unit of Panasonic Corporation of North America
Executive Offi ce :
One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000
EASTERN ZONE : One Panasonic Way 4E-7 Secaucus, NJ 07094 (201) 348-7621
Mid-Atlantic/New England : One Panasonic Way 4E-7 Secaucus, NJ 07094 (201) 348-7621
Southeast Region : 1225 Northbrook Parkway, Ste 1-160 Suwanee GA 30024 (770)338-6835
Central Region : 1707 N Randall Road E1-C-1, Elgin, IL 60123 (847)468-5200
WESTERN...