Panasonic High Definition Hospitality Plasma Display Th 37pr10 Operating Instructions

11
SERIAL
6789 13452
Connections
SERIAL Terminals connection
Notes:
•  Use the RS-232C cable to connect the computer to the Plasma Display.
•  The computer shown is for example purposes only.
•  Additional equipment and cables shown are not supplied with this set.
The SERIAL terminal conforms to the RS-232C interface specification, so that the Plasma Display can be controlled by a 
computer which is connected to this terminal.
The computer will require software which allows the sending and receiving of...

12
POWER
Power ON / OFF 
Connecting the AC cord plug to the Plasma Display.
Press the  button on the remote control to turn the Plasma Display off.
  Power Indicator: Red (standby)
Press the 
 button on the remote control to turn the Plasma Display on.
  Power Indicator: Green
Turn the power to the Plasma Display off by pressing the 
   switch on the unit, 
when the Plasma Display is on or in standby mode.
Note: 
During operation of the power management function, the power indicator turns 
orange in the...

13
1/2
PC
OFF
STANDBY SAVE
OFF
POWER MANAGEMENTOFF
AUTO POWER OFF
OFF
OSD LANGUAGEENGLISH (
US) COMPONENT/RGB-IN SELECT
RGB
INPUT LABELSIGNAL
POWER SAVE
SET UP
.......(Japanese) .......(Chinese) Italiano Français Deutsch English(UK)
Español
ENGLISH(US)
.......(Russian)
Русский
MENU
ENTER/INPUT
VOL
Initial selections
Selecting the On-Screen Menu Language Selecting the input signal
Press to display the SET UP menu.
Press to select OSD LANGUAGE.
Press to select your preferred language.
   Selectable...

14
MENU
POWER
ENTER/INPUTVOL
ON  OFF
ON SURROUND
Basic Controls
N button (see page 19, 22, 23, 24)
POS. /SIZE button (see page 19)
PICTURE button (see page 22)
INPUT button 
(INPUT1, INPUT2, INPUT3 and PC selection)
Press to select INPUT1, INPUT2, INPUT3 and PC input 
SLOTS sequentially. (see page 13)
Sound mute On / Off (see page 24)
Numeric buttons
ASPECT button
Press to adjust the aspect. (see page 18)
MULTI Window buttons (see page 20) SURROUND button
The surround setting switches on and off each...

15
Basic Controls
OFF  TIMER 90
1
2
3 PCNORMAL
Standby (ON / OFF) button
The Plasma Display must first be plugged into the wall outlet and turned on at the power switch (see page 12).
Press ON to turn the Plasma Display On, from Standby mode. Press OFF to turn the Plasma Display Off 
to Standby mode.
SET UP button (see page 16, 17)
DIRECT INPUT buttons
Press the INPUT “1”, “2”, “3” or “PC” input mode selection button to 
select the INPUT mode.
This button is used to switch directly to INPUT mode.
These...

16
1/2PICTURE
NORMALNORMALIZESTANDARD
25
0
0
0
5 BRIGHTNESS
SHARPNESS PICTURE MENU
COLOR PICTURE
TINT
2/2
ADVANCED SETTINGS COLOR TEMP
COLOR MANAGEMENTNORMAL
OFF
ON
PICTURE
0
0
2.2
1/2
BLACK EXTENSION
AGC GAMMA INPUT LEVEL
ADVANCED SETTINGS
NORMALNORMALIZE
OFF
0
0
0
0
0
0
2/2
W/B LOW B W/B HIGH R
W/B LOW R
W/B LOW G W/B HIGH G
W/B HIGH B
ADVANCED SETTINGS
0000
NORMALNORMALIZE
POS. /SIZE
V-POS H-POS
V-SIZEH-SIZE
00000
NORMALNORMALIZE
POS. /SIZE
V-POS
H-POS
V-SIZEH-SIZE
CLOCK PHASE
0
0
0
SOUND...

17
SYNC
VIDEO NR
SIGNAL
AUTO
H-FREQ.
V-FREQ.kHz
Hz33.8
60.0
[ 
RGB ]
3 : 2 PULLDOWNOFF
OFF3 : 2 PULLDOWN
VIDEO NR
SIGNAL
OFF
OFF
 [ 
COMPONENT ]
3D Y/C FILTER (NTSC)
COLOR SYSTEM
SIGNAL
ON
AUTO
3 : 2 PULLDOWNOFFPanasonic AUTO (4 : 3)NORMAL
[ 
VIDEO ]
VIDEO NR
OFF
99:99MON
PRESENT  TIME SETUP
PRESENT  TIME OF DAY    MON  99:99
SET
PRESENT  TIME OF DAY DAY
12:00
18:00
SET UP TIMER
POWER OFF FUNCTION
POWER OFF TIME POWER ON TIME POWER ON FUNCTION
OFF
OFF PRESENT  TIME OF DAY    10:00
12:00
18:00
SET UP...

18
MENU
ENTER/INPUT
VOL
ASPECT Controls
The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture.
Press repeatedly to move through the aspect options:
Mode Picture Explanation
NORMAL
NORMAL
3 4
NORMAL will display a 4:3 picture at its standard 4:3 size.
ZOOM
ZOOM4
316
9ZOOM mode magnifies the central section of the picture.
FULL
FULL4
316
9FULL will display the picture at its maximum size but with slight 
elongation.
JUST
4
39 16...

19
00000
NORMALNORMALIZE
POS. /SIZE
V-POS H-POS
V-SIZEH-SIZE
CLOCK PHASE
0000
NORMALNORMALIZE
POS. /SIZE
V-POS H-POS
V-SIZEH-SIZE
Adjusting POS. /SIZE
1Press to display the POS. /SIZE menu.
Press to select H-POS / H-SIZE / V-POS / V-SIZE / 
CLOCK PHASE.
Press to adjust POS. /SIZE.
Press to exit from adjust mode.
During “VIDEO (S VIDEO)”, 
“COMPONENT” and “Digital” input signal.
During “RGB / PC” input signal.
3 2
Notes:
• Adjustment details are memorized separately for different input signal formats...

20
A B  A B A B 
B A B A B A 
PC1
VIDEO2PC1
VIDEO2
VIDEO2
VIDEO1PC1
VIDEO2
A
A
A
CB
B
B
D
MULTI PIP
Press repeatedly.
Each time pressing this button main picture and sub picture will be displayed 
as follows below.
Press to swap main 
picture and sub picture.
Press to select the input mode.
Under main Picture and sub picture display, select 
the picture which you would like to change input 
modes.
Notes:
• The sub picture sound is heard while a sub 
picture operation is underway.
• The sub picture...