Home
>
Panasonic
>
Car Satellite Radio System
>
Panasonic Heavy Duty Cassette Weather Band Reciever Cq 2130 Operating Instructions
Panasonic Heavy Duty Cassette Weather Band Reciever Cq 2130 Operating Instructions
Have a look at the manual Panasonic Heavy Duty Cassette Weather Band Reciever Cq 2130 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
CQ-2130U21 Cautions: • This wiring information is for experienced technical individual, for safety reason, please your dealer wire this con- nection. • This product is designed to operate with a 12 V DC, negative ground battery system. • To prevent damage to the unit, be sure to follow the connection diagram below. • Do not insert the power connector into the unit until the wiring is completed. • Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all cables and keep cable terminals free from touching any metal parts. • Remember, if your car has a drive computer or a navigation computer, the data of its memory maybe erased when the battery terminals are disconnected. ❐Wiring Diagram CQ-2130U 10 12 14 16 7 86 4253 1 9111315 Accessory Power(ACC) (+12V DC, negative ground only) Ground Lead (Connect to a clean, bare metallic part of your vehicle) Battery Lead (Connect to vehicle battery) (Red) ACC Ground(Black) (Yellow) Battery (Violet) (Violet/Black) (Gray/Black) (Green) (Green/Black) (White/Black)(Gray) (white) Left Speaker (Front)Right Speaker (Front)Left Speaker (Rear)Right Speaker (Rear) Power Connector Antenna o Antenna Connector Detail of power connectorNO. FUNCTION NO. FUNCTION1BATTERY +12 V 9 REAR SP R (–)2GROUND 10 REAR SP R (+)3oooo11 FRONT SP R (–)4oooo12 FRONT SP R (+)5oooo13 FRONT SP L (–)6POWER +12 V ACC 14 FRONT SP L (+)7oooo15 REAR SP L (–) 8oooo16 REAR SP L (+) The power connector does not come along with the unit. If need, please consult your dealer. O Electrical Connections
CQ-2130U22 Specifications ❐General Power Supply: 12 V DC (11 V-16 V) test Voltage 14.4 V, Negative ground Current consumption: Less than 2.5 A (tape mode, 0.5 W 4-speaker) Maximum Power Output: 37 W ×4 channels at 400 Hz, Volume Control maximum Tone adjustment range: Bass: ± 12 dB at 100 Hz Treble: ± 12 dB at 10 kHz Power Output: 18 W per channel into 4 ohms, 40 to 30 000 Hz at 3 % THD Suitable Speaker Impedance: 4-8 Ω Dimensions (W ×H ×D): 7 ×1-15/16 ×6-1/10 (178 ×50 ×160 mm) Weight: 3 lbs. 8 oz. (1.6 k ) ❐FM Stereo Radio Frequency Range: 87.9-107.9 MHz Useable Sensitivity: 12 dBf. (1.1 µV, 75 Ω, S/N 30 dB) 50 dB Quieting Sensitivity: 17 dBf. (1.8 µV, 75 Ω) Frequency Response: 30-15 000 Hz ±3 dB Alternate Channel Selectivity: 75 dB Stereo Separation: 35 dB at 1 kHz Signal/Noise Ratio: 70 dB (Mono) ❐AM Radio Frequency range: 530 kHz–1 710 kHz Usable sensitivity: 28 dB/µV (25 µV, S/N 20 dB) ❐Tape Player Reproduction System: 4-track, 2-program stereo Tape Speed: 1-7/8/sec (4.76 cm/sec) FF/REW Time: Less than 200 sec (C-60) Frequency Response: 35-14 000 Hz ±3 dB Wow and Flutter: 0.12 % (WRMS) signal/Noise Ratio: 52 dB Above specifications comply with EIA standards. Note:Specifications and design are subject to modification without notice due to improvements in technology.
YFM284C421ZA TAMACO0204-0 Printed in Taiwan Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way, Secaucus, New Jersey 07094