Panasonic Hdc Sdt750 Operating Instructions

141VQT3B18
Others
Indications
2
Messages
Major confirmation/error messages to be indicated on the screen in text.
CHECK CARD.
This card is not compatible or it cannot be recognized by the unit.
If this message appears even though motion pictures and still pictures are recorded on 
an SD card, the card may be unstable. Reinse rt the SD card, then turn the unit off and 
then on again.
THIS BATTERY CANNOT BE USED.
≥ Use a battery that is compatible with this unit. ( l19)
If using a Panasonic battery...

142VQT3B18
If faulty management information is found, the messages may appear and a repair is 
performed. (Repairing may take time depending on the error.)
≥The above message is displayed when abnormal management information is detected 
when the scenes are displayed in thumbnail. To perform the repair, touch the scene with 
 in the thumbnail, and start the playback. Please be aware that if the repair fails, 
scenes with   will be deleted.
≥ Use a sufficiently charged battery or the AC adaptor.
≥...

143VQT3B18
Others
Troubleshooting
ProblemCheck points
This unit cannot be 
turned on.
This unit does not stay 
on long enough.
Battery runs down 
quickly. ≥
Charge the battery again to ensure it is sufficiently 
charged. ( l19)
≥ In cold places, the battery using time becomes 
shorter.
≥ The battery has a limited life. If the operating time is 
still too short even after the  battery is fully charged, 
the battery has worn out and needs to be replaced.
This unit is turned off 
automatically. ≥
If the...

144VQT3B18
ProblemCheck points
This unit cannot be 
operated though it is 
turned on.
This unit does not 
operate normally. ≥
Remove the battery or AC adaptor, wait about 
1 minute and then reconnect the battery or AC 
adaptor. Then about 1 minute later, turn on the unit 
again. (Conducting the above operation while the 
media is being accessed may damage the data on 
the media.)
≥ If normal operation is still not restored, detach the 
power connected, and contact consumer support. 
(l 170, 171, 172)...

145VQT3B18
Color balance of 
images is strange 
when recording in a 
place such as a 
gymnasium.≥
In a place with multiple light sources, such as a 
gymnasium or a hall, set the white balance setting to 
 (Indoor mode 2). If you cannot record clearly 
with the   (Indoor mode 2), set it to   (Manual 
adjustment mode). ( l87)
Scenes/still pictures 
cannot be played 
back. ≥
Any scenes/still pictures where the thumbnails are 
displayed as   cannot be played back.
Although this unit is 
correctly connected...

146VQT3B18
Color or brightness of 
the image changes, or 
you may see 
horizontal bars in the 
image.
The LCD monitor 
flickers indoors.≥
Color or brightness of the image may change, or you 
may see horizontal bars in the image when the 
object is recorded under fluorescent light, mercury 
light or sodium light, etc., but this is not a 
malfunction.
≥ In Motion Picture Recording Mode, record in 
Intelligent Auto Mode or set the shutter speed to 
1/60 in areas where the power supply frequency is 
60 Hz,...

147VQT3B18
VIERA Link does not 
work.[Setting on this unit]
≥
Connect with a HDMI mini cable. ( l11 0 )
≥ Press the MENU button, then touch [SETUP]  # 
[VIERA Link]  # [ON]. ( l110)
≥ Turn the unit off and then back on again.
[Setting on other devices]
≥ If the TV input does not switch automatically, switch 
the input using the TV remote control.
≥ Check the VIERA Link setting on the connected 
device.
≥ Please refer to the operating instructions of the 
connected device.
When connected by 
the USB...

148VQT3B18
∫If scenes do not change smoothly when played back on another 
device
The images may be still for several seconds at  the joins between the scenes if the following 
operations are performed when multiple scenes have been continuously played back using 
another unit.
≥ Just how smoothly the scenes will be play ed back depends on the playback unit. 
Depending on the unit used, the images may stop moving and become still for a moment 
even when none of the following conditions are applicable.
≥ A...

149VQT3B18
Others
Cautions for use
The unit and the SD card become warm 
during use. This is not a malfunction.
Keep this unit as far away as possible 
from electromagnetic equipment (such 
as microwave ovens, TVs, video games 
etc.).
≥If you use this unit on top of or near a TV, 
the pictures and/or sound on this unit may 
be disrupted by electromagnetic wave 
radiation.
≥ Do not use this unit near cell phones 
because doing so may result in noise 
adversely affecting the pictures and/or 
sound.
≥...

150VQT3B18
Do not use the unit for surveillance 
purposes or other business uses.
≥This unit was designed for consumer 
intermittent use. It was not intended for 
continuous use, or for any industrial or 
commercial application resulting in 
prolonged use.
≥ In certain situations, continuous use could 
cause the unit to overheat and cause a 
malfunction. Such use is strongly 
discouraged.
When you are not going to use the unit 
for an extended time
≥ When storing the unit in a cupboard or 
cabinet, it is...