Panasonic Hdc Sd900 Operating Instructions

41VQT3K80
≥The items displayed differ depending on the position or settings of the mode switch.
Select the menu.
Please refer to page 26.
It is possible to display and record the time at the travel destination by selecting your home 
region and the travel destination.
1 Touch [SET WORLD TIME].≥If the clock is not set, adjust the clock to the current time. ( l26)
≥ When the [HOME] (your home region) is not set, the message appears. Touch [ENTER] 
and proceed to step 3.
2(Only when setting your home...

42VQT3K80
5(Only when setting the region of your travel 
destination)
Touch  /  to select your travel 
destination and touch [ENTER].
≥Touch [SUMMER TIME SET] to set daylight 
saving time.   appears and the 
summer time setting is turned on. The travel 
destination time and time difference from 
the home region time are set forward by one 
hour. Touch [SUMMER TIME SET] again to 
return to the normal time setting.
≥ Close the setting by touching [EXIT].   
appears and the time of the travel destination is...

43VQT3K80
The unit is put into recording pause approx. 1 second when the unit is turned on with the 
mode set to   or  .
≥Depending on the recording conditions, start time may be longer than 1 second.
≥ In the quick power on mode, the zoom magnification becomes 1 k.
This unit will resume recording pause mode about 0.6 seconds after the LCD monitor is 
reopened or the viewfinder is extended.
≥ Quick start will not work if there is no SD card inserted.
/
≥ Quick start will not work if the [SD CARD] is...

44VQT3K80
Please refer to page 49.
The recording lamp lights up during recording and flashes when the unit receives a signal 
from the remote control or when the self-timer is counting down. When this is set to [OFF], it 
does not light during recording.
Touch screen operation, start and stop of recording and unit on/off can be confirmed with this 
sound.(Volume low)/ (Volume high)
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. ( l142)
This makes it easier to view...

45VQT3K80
It adjusts the brightness of the viewfinder.
≥These settings will not affect  the images actually recorded.
1 Extend the viewfinder and open the LCD 
monitor.
2Touch [EVF SET].
≥ The viewfinder turns on.3 Touch  /  to adjust the setting.≥Adjust while checking the picture in the viewfinder.4 Touch [ENTER].≥Touch [EXIT] to complete the setting.
Please refer to page 106.
Please refer to page 106.
Please refer to page 106.
Please refer to page 107.
Please refer to page 105.
Please refer to page...

46VQT3K80
Set the file number of the iFrame and still picture recorded next to 0001.
≥Folder number is updated and file number will start from 0001. ( l136)
≥ To reset the folder number, format the SD card, built-in memory or HDD, and then perform 
[NUMBER RESET].
≥ Please be aware that if a medium is formatted , then all the data recorded on the medium 
will be erased and cannot be restored. Back up important data on a PC, DVD disc etc. 
( l 113, 126)
Please be aware that if a medium is formatted,  then...

47VQT3K80
≥Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to 
vibrations or shock.
The used space and remaining recordable time of the SD card can be checked.
≥ When the mode switch is set to  , remaining recordable time for the selected recording 
mode is displayed.
≥ Touch [EXIT] to close the indication.
≥The SD card requires some space to store information and manage system files, so the 
actual usable space is slightly less than the indicated value. The...

48VQT3K80
Perform the touch screen calibration if a different object to the one touched is selected.1 Touch [CALIBRATION].≥Touch [ENTER].2Touch the [ _] that appears on the screen with the supplied stylus pen.≥Touch [ _] in sequence (up left # down left  # down right # up right  # centre).3 Touch [ENTER].
This item is used to start the unit demonstration.
(Only when the mode is at the   or   position)
If [DEMO MODE] is switched to [ON] and you touch [EXIT] when there is no SD card inserted 
and while...

49VQT3K80
Select the menu.
1 Power on/off button [ ]
Unit can be turned on/off when the LCD 
monitor is opened or the viewfinder is 
extended.
≥Unit cannot be turned on by the power on/
off button when 36 hours have passed 
after the unit is turned off. Press the power 
button on the unit and turn the unit back 
on.
≥ Unit cannot be turned off when it is 
connected to the PC or the DVD burner.
2 Photoshot button [ ]
*
3 On-screen display button  [EXT DISPLAY] ( l105)
4 Playback operation buttons ( l36,...

50VQT3K80
∫Remote control usable range
A Remote control sensor
Distance: Within approx. 5 m
Angle: Approx. 10 o up and 15 o down, left, 
and right
≥ The remote control is intended for indoor 
operation. Outdoors or under strong light, 
the unit may not operate properly even 
within the usable ranges.
Operation of direction 
buttons/OK button
1Press a direction button.
≥Selected item will become yellow.
2Select the item with the 
direction button.
3Confirm the selection by 
pressing the OK button....