Panasonic Hdc Sd9 Operating Instructions

111VQT1N45
Indications
2
Messages
Major confirmation/error messages to be indicated on the LCD monitor in text.
CANNOT BE USED DUE TO INCOMPATIBLE DATA.
CANNOT RECORD - INCOMPATIBLE CONTROL DATA.
The recording format of the SD card is different so it cannot be used. Save the data on the SD card 
to a PC, then use the SD card after formatting it on this unit.
CHECK CARD.
This card is not compatible or it cannot be recognized by the unit.
If this message appears even though motion pictures and still...

112VQT1N45
If faulty management information is found when a SD card is accessed, one of the following messages 
may appear. Be sure to follow the messages. (Repairing may take time depending on the error.)
≥Use a sufficiently charged battery or the AC adaptor.
≥Depending on the condition of the data, it may not be possible to completely repair the data.
≥If the recovery fails, you will no longer be able to play back the scenes recorded before the power 
went off.
≥When data recorded on another device is...

11 3VQT1N45
Helpful hints
1
Functions that cannot be 
used simultaneously
Some functions in this unit are disabled or cannot be selected due to the unit’s specifications. 
The table below shows examples of functions restricted by various conditions.
FunctionsConditions which disable the functions
Motion picture recording≥When the HD hi-speed burst shooting mode is on
PRE-REC
Zoom≥When the   button is pressed halfway
Digital zoom≥When 24p digital cinema is used
≥When the HD hi-speed burst shooting mode is...

114VQT1N45
FunctionsConditions which disable the functions
Flash≥While recording motion pictures
≥When PRE-REC is used
≥When the MagicPix function is used
≥When the HD hi-speed burst shooting mode is on
Auto slow shutter≥When the HD hi-speed burst shooting mode is on
Digital cinema color≥When the MagicPix function is used
≥When the HD hi-speed burst shooting mode is on
Scene mode≥When the low light mode is used
≥When setting the AUTO/MANUAL/FOCUS switch 
to AUTO
≥When the MagicPix function is used
≥When...

11 5VQT1N45
Helpful hints
2
Troubleshooting
ProblemCheck points
This unit cannot be 
turned on.
This unit does not stay 
on long enough.
Battery runs down 
quickly.≥Charge the battery using the AC adaptor. (l20)
≥The battery protection circuit may have operated. Attach 
the battery to the AC adaptor for 5 to 10 seconds. If the unit 
still cannot be used, the battery is faulty.
≥Make sure the LCD monitor is opened.
≥The battery is affected by ambient temperature. In cold 
places, the battery using time...

116VQT1N45
ProblemCheck points
This unit cannot be 
operated though it is 
turned on.
This unit does not 
operate normally.≥The unit cannot be operated if the LCD monitor is not 
opened.
≥Press the RESET button. (l118) If normal conditions are 
not restored yet, remove the battery or AC adaptor, wait 
about 1 minute and then reconnect the battery or AC 
adaptor. Then about 1 minute later, turn on the power 
again. (Conducting the above operation while the SD card 
is being accessed may damage the data on...

11 7VQT1N45
Recorded still pictures 
are not clear.≥If you are trying to record small or finely detailed objects 
with [PICT.QUALITY] set at [ ], the images may break up 
into a mosaic-like pattern. Record with [PICT.QUALITY] set 
at [ ] instead. (l43)
Some playback images 
are skipped 
automatically.≥The playmode is set to   (Intelligent scene selection). 
Change the playmode to   (All scenes). (l67)
Although this unit is 
correctly connected to a 
TV, images cannot be 
seen.
The images are squeezed...

118VQT1N45
The indication 
disappears.
The screen is frozen.
No operation can be 
performed.≥No operation can be performed on this unit when it is 
connected to a PC.
≥Turn off the power to this unit. If the power cannot be turned 
off, press the RESET button, or remove the battery or AC 
adaptor and then reattach it. Turn on the power again. If 
normal operation is still not restored, detach the power 
connected, and contact consumer support. (l136, 137)
White round spots like 
soap bubbles appear on...

11 9VQT1N45
VIERA Link does not 
work.≥Connect with a HDMI mini cable (optional). (l83)
≥Press the MENU button, then select [SETUP] # 
[VIERA Link] # [ON] with the cursor button. (l83)
≥Depending on HDMI terminal of the TV, the input channel 
may not switch automatically. In this case, use the remote 
control for the TV to switch input. (For details on how to 
switch input, please read the operating instructions for the 
TV.)
≥Check the VIERA Link setting on the connected device.
≥Turn the power to the...

120VQT1N45
∫If scenes do not change smoothly when played back on another device
The images may be still for several seconds at the joins between the scenes if the following operations 
are performed when multiple scenes have been continuously played back using another unit.
* Just how smoothly the scenes will be played back depends on the playback unit. Depending on the 
unit used, the images may stop moving and become still for a moment even when none of the 
following conditions are applicable.
∫When...