Panasonic Hdc Sd20 Operating Instructions

31VQT1Y00
Preparation
Setup
3
Selecting a mode
(Turning the unit on/off)
Change the mode to recording, playback or power OFF.
Turn on the power by changing the mode to   or   while pressing the 
lock release button A.
The status indicator lights.
To turn off the power
Change the mode to OFF.
The status indicator  B goes off.
≥Operate the mode switch while at the same 
time pressing in the lock release button if 
changing from OFF to another mode.
≥ Status indicator  B
HDC-SD20
HDC-TM20
≥ Rotate the mode...

32VQT1Y00
When the mode is set to  , power is turned on when the LCD monitor is opened, and power is 
turned off when it is closed.
∫ To turn on the power
A The status indicator lights.
∫To turn off the power
A The status indicator goes off.
Turning the power on and off with the LCD monitor
Change the mode to OFF when this unit is not being used.
HDC-SD20
HDC-TM20HDC-HS20
HDC-SD20
HDC-TM20HDC-HS20
HDCSD20&SD25&HS20P-VQT1Y00_eng.book  32 ページ  ２００８年１２月２２日　月曜日　午後８時１６分 

33VQT1Y00
Preparation
Setup
4
How to use the touch screen
You can operate by directly touching the LCD monitor (touch screen) with your finger.
It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate with your fingers.
∫Touch
Touch and release the touch screen to select 
icon or picture.
≥Touch the center of the icon.
≥ Touching the touch screen will not operate 
while you are touching another part of the 
touch screen.
∫ About the Stylus pen
The stylus pen...

34VQT1Y00
Preparation
Setup
5
Using the menu screen
1Press the MENU button.
2Touch the top menu A.
3Touch the submenu B.
≥Next (previous) page can be displayed by 
touching / .
≥ Information display setting is completed when 
 is surrounded by yellow after touching it.
4Touch the desired item to enter 
the setting.
5Touch [EXIT] or press the MENU 
button to exit the menu setting.
∫ About   information display 
setting
An explanation or setting confirmation message 
of the submenu or item being touched...

35VQT1Y00
You can select the language on the screen display and the menu screen.
1Press the MENU button, then touch [SETUP] # [LANGUAGE].
2Touch [English].
Part of the menu will not be used depending on the used functions. ( l135)
Recording mode
*1 It is not displayed when the Intelligent auto mode is on.
*2 These menus are only for  .
*3 These menus are only for  .
*4 /: when the [MEDIA SELECT] is set to [SD CARD].
*5  It will be displayed only when the [MEDIA SELECT] is set to [Built-in Memory].
*6  It...

36VQT1Y00
PICTURE
[QUALITY](l 55)
[HI-SPEED BURST]
*1(l 70)
[SELF TIMER] (l 71)
[FLASH] (l71)
[FLASH LEVEL]
*1(l 71)
[RED EYE]
*1(l 72)
[SHTR SOUND] (l 72)
MEDIA SELECT*2*3
Media to record can be set to [Built-in 
Memory] or [SD CARD].
Media to record can be set to [HDD] or 
[SD CARD].
SETUP
[DISPLAY]
The screen indications are selected as 
shown in the illustration below.
[OFF] [ON]
[CLOCK SET] (l 39)
[SET WORLD TIME] (l 40)
[DATE/TIME] (l 39)
[DATE FORMAT] (l 39)
[ECONOMY]
[OFF]:
The power saving...

37VQT1Y00
[ALERT SOUND]
Touch screen operation, starting and 
stopping of recording and power on/off can 
be confirmed with this sound.
2 Beeps for 4 times
When an error occurs. Check the sentence 
displayed on the screen. (l133)
[POWER LCD] (l 41)
[LCD SET] (l41)
[COMPONENT OUT] (l 102)
[HDMI RESOLUTION] (l 101)
[VIERA Link] (l 103)
[TV ASPECT] (l100)
[INITIAL SET]
Set to [YES] for changing the menu settings 
back to the default condition.
(Settings for [CLOCK SET], 
[MEDIA SELECT]
*2*3 and [LANGUAGE]...

38VQT1Y00
Playback mode
*1 When the disc playback is selected while a DVD burner (optional) is connected, or when 
[INTEL. SCENE] ( l82) is selected, this does not appear.
*2 Only when the disc playback is selected while a DVD burner (optional) is connected, this appears.
*3 These menus are only for  .
*4 These menus are only for  .
*5 This appears only when the [VIDEO/SD CARD] or [PICTURE/SD CARD] is selected.
*6  This appears only when the [VIDEO/Built-in Memory] or [PICTURE/Built-in Memory] 
is...

39VQT1Y00
Preparation
Setup
6
Setting date and time
When the unit is turned on for the first time, a message asking you to set the date and time will appear.
Select [YES] and perform steps 2 to 3 below to set the date and time.
¬Change the mode to  .
1Select the menu. ( l34)
2Touch the date or time to be set, 
then set the desired value using 
/.
≥The year will change as follows:
2000, 2001, ..., 2039, 2000, ...
≥ The 12-hour system is used to display the time.
≥  appears on the right top of the screen...

40VQT1Y00
It is possible to display and record the time at the travel destination by selecting your home region and 
the travel destination.
1Select the menu. (l34)
≥If the clock is not set, adjust the clock to the 
current time. ( l39)
≥ When the [HOME] (your home region) is not 
set, the message appears. Touch [ENTER] and 
proceed to Step 3.
2(Only when setting your home region)
Touch [HOME].
≥Touch [ENTER].
3(Only when setting your home region)
Touch  /  to select your home 
region and touch [ENTER]....