Panasonic Hdc Hs700 Operating Instructions

131VQT2M75
∫Playback indicationsZoom Microphone ( l73)
Focus Microphone ( l73)
Stereo Microphone ( l73)
Wind Noise Canceler ( l73)
// Bass Setting ( l75)
/ Smile Shot (l 61)
Microphone Level ( l74)
Backlight Compensation (l62)
Soft Skin Mode ( l63)
Tele Macro ( l63)
/
Fade (White), Fade (Black) (l60)
Color Night Rec function (l64)
Intelligent Contrast Control (l60)
Intelligent Exposure ( l62)
99% Luminance Level ( l76)
±  (White)/ ¥ (Green)/ / / / /
Focus indication ( l37)
Ø10/ Ø2 Self-Timer Recording (l...

132VQT2M75
∫Indication of connection to 
other devices
∫ Confirmatory indications
∫ Confirmatory indications when 
a DVD burner is connected
Accessing the card ( l126)
Accessing the built-in memory 
( l 126)
*1
Accessing the HDD ( l126)*2
–– (Time 
display)The built-in battery is low. (l32)
Warning for face-to-face 
recording ( l31)
Disc Playback ( l114)
Scene copied in [Standard]([XP])
Scene copied in [Standard]([SP])
//////
Disc type ( l109)
Unusable disc
XPSP
HDC-TM700&HS700P&PC-VQT2M75_mst.book  132...

133VQT2M75
Others
Indications
2
Messages
Major confirmation/error messages to be indicated on the screen in text.
*  only
RECOMMEND DATA BACK UP PERIODICALLY.
We recommend backing up important recorded motion pictures and still pictures 
periodically to a PC, DVD disc etc. to protect it. (l109, 117) This message does not 
indicate that there is a problem with this unit.
HDD BACKUP RECOMMENDED.*
There is a possible problem with the HDD. Copy the motion pictures and still pictures 
stored on the HDD to a...

134VQT2M75
If faulty management information is found, the messages may appear and a repair is 
performed. (Repairing may take time depending on the error.)
≥The above message is displayed when abnormal management information is detected 
when the scenes are displayed in thumbnail. To perform the repair, touch the scene with 
 in the thumbnail, and start the playback. Please be aware that if the repair fails, 
scenes with   will be deleted.
≥ Use a sufficiently charged battery or the AC adaptor....

135VQT2M75
Others
Troubleshooting
ProblemCheck points
This unit cannot be 
turned on.
This unit does not stay 
on long enough.
Battery runs down 
quickly. ≥
Charge the battery again to ensure it is sufficiently 
charged. ( l22)
≥ In cold places, the battery using time becomes 
shorter.
≥ The battery has a limited life. If the operating time is 
still too short even after the  battery is fully charged, 
the battery has worn out and needs to be replaced.
This unit is turned off 
automatically. ≥
If the...

136VQT2M75
ProblemCheck points
Item other than the 
touched one is 
selected. ≥
Calibrate the touch screen. ( l51)
The remote control 
does not function. ≥
[REMOTE CONTROL] of the [SETUP] is [OFF]. 
(l 53)
≥ The button-type battery of the remote control may 
have run out. Replace it with a new button-type 
battery. ( l53)
The remaining time 
indication or the 
elapsed time indication 
is not shown.≥[DISPLAY] of the [SETUP] is [OFF]. ( l46)
The unit arbitrarily 
stops recording. ≥
Use an SD card that can...

137VQT2M75
Any scenes/still 
pictures cannot be 
played back.≥
Any scenes/still pictures where the thumbnails are 
displayed as   cannot be played back.
Although this unit is 
correctly connected to 
a TV, images cannot 
be seen.
The images are 
squeezed horizontally. ≥
Please read the operating instructions of your TV 
and select the channel that matches the input used 
for the connection.
≥ Change the [TV ASPECT] setting to match the 
aspect ratio of the TV. ( l103)
≥ Change the setting of the unit...

138VQT2M75
Object seems to be 
warped.≥
Object seems to be warped slightly when the object 
moves across the image very fast, but this is 
because the unit is using MOS for the image sensor. 
This is not a malfunction.
White round spots like 
soap bubbles appear 
on the recorded 
picture. ≥
If you take a picture 
with the flash in a dark 
place or indoors, white 
round spots may 
appear on the picture 
caused by the flash 
reflecting of particles of dust in the air. This is not a 
malfunction.
A...

139VQT2M75
When connected by 
the USB cable, this 
unit is not detected by 
the PC.≥
After re-inserting the SD card into the unit, reconnect 
the supplied USB cable.
≥ Select another USB terminal on the PC.
≥ Check the operating environment. ( l120)
≥ Connect the supplied USB cable again after 
restarting the PC and turning on this unit again.
When the USB cable is 
disconnected, an error 
message will appear 
on the PC. ≥
To disconnect the USB cable safely, double-click the 
 icon in the task tray and...

140VQT2M75
∫If scenes do not change smoothly when played back on another device
The images may be still for several seconds at the joins between the scenes if the following 
operations are performed when multiple scenes have been continuously played back using 
another unit.
≥ Just how smoothly the scenes will be play ed back depends on the playback unit. 
Depending on the unit used, the images may stop moving and become still for a moment 
even when none of the following conditions are applicable.
≥ A...