Panasonic Hd Plasma Television Th 42pz77 Operating Instructions
Have a look at the manual Panasonic Hd Plasma Television Th 42pz77 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
21 Viewing Watching TV Favorite channels1/3 1 2 3 4 26-1 - - - Set favorite 1/3 1 2 3 --- --- --- --- 4 Setup SUB MENU AllSurf mode Set favorite OffCC Caption select Signal meter Setup SUB MENUAllSurf mode Set favorite OffCC Caption select Signal meter Set favorite 1/3 1 2 3 4 26-1 - - - SUBSUBMENUMENU Change aspect ratio Call up a favorite channel ■ Press ASPECT to cycle through the aspect modes. (p. 47) • 480i, 480p: FULL/JUST/4:3/ZOOM • 1080p, 1080i, 720p: FULL/H-FILL/JUST/4:3/ZOOM ■ FAVORITE Channel numbers registered in Favorite are displayed on the favorite tune screen. Select the desired broadcast station with the cursor or use number buttons. (see below) Note • Reselect “Cable” or “Antenna” in “ANT in” of “Program channel” to switch the signal reception between cable TV and antenna. (p. 19, 35) • The channel number and volume level remain the same even after the TV is turned off. 1 Press FAVORITE. • Press FAVORITE repeatedly to change between pages (1/3, 2/3, 3/3, or exit). 2 Press ▲▼ or a Numbered key (1-9 and 0) to highlight a channel on the list. • Selecting a channel number from the list with the number button will display the channel directly. 3 Press OK to display the highlighted channel. Use Favorite Feature select ok • To change the page Pressing ◄ changes the page backward. Pressing ► changes the page forward. 1 Display the SUB MENU. 2 • Press FAVORITE repeatedly to change between pages (1/3, 2/3, 3/3, or exit). 3 Press ▲▼to highlight a position on the list. Then, press OK to save the displayed channel in that position. • You can also use the NUMBER buttons (1-9 and 0) to select a list number (1-9 and 0). By doing so, the displayed channel will be saved on that list number without pressing OK. • To delete a favorite channel A saved channel can be removed from the list by holding down OK while its position is highlighted. Set Favorite Feature select ok select “Set favorite” ok
22 Slide showRYGB OK Select Accessing RETURN No. 101-0365 Date 01/01/2007 Pixel 1600x1200 Photo viewerTotal Information12 101-0365101-0366 101-0367 101-0368 101-0369 101-0370 101-0371 101-0372 101-0373 101-0374 101-0375 101-0376 Accessing Slide showRYGB NextPrev. Rotate RETURN Accessing SingleRYGB Pause Next Prev. RETURN Viewing from SD Card You can view photos taken with a digital camera or digital video camera and saved on an SD card. (Media other than SD Cards may not be reproduced properly.) Select the data to be viewed 3 2Select the SD mode or select view Thumbnail view Selected picture information is displayed. No.: Image number or file name is displayed. Date: Date of recording is displayed. Pixel: Display resolution is displayed. ■ Press to return to TV ■ Press to exit from menu screen ■ Press to return to the previous screenTotal number of images SD Card • Remove the card Press in lightly on SD Card, then release. Label surface • Compliant card type (maximum capacity): SDHC Card (4 GB), SD Card (2 GB), miniSD Card (1 GB) (requiring miniSD Card adapter) • Insert the card Navigation area (to Slide show) Present status (While reading the data) 1 Insert the SD Card • For cautions and details on SD Cards (p. 48) Note • Depending on the JPEG format, “Information” contents may not be displayed correctly. Refer to p. 48 (Data format for SD card browsing) for details. (to Single photo display) Push until a click is heard Display menu Select “Memory card”
23 Viewing Viewing from SD Card Viewing from a GalleryPlayer SD Card GalleryPlayer images are available for a fee from GalleryPlayer, Inc. Slide showRYGB Next Rotate Prev.RETURN JPEG menu Picture JPEG setup OK Select RETURN Picture 1/2 Normal Picture mode Picture Brightness Set Vivid 0 0 JPEG setup Disp. time Repeat 5 On JPEG menu Picture JPEG setup OK Select RETURN • To display/hide Navigation area Rotate 90 degrees (counter-clockwise) To next photo Rotate 90 degrees (clockwise) To previous photo View 4 Displays one at a time Navigation area ■ To adjust picture Picture menu (p. 26) To change the view (Slide show mode, adjusting images, etc.) ■ To watch photos in Slide show mode In or When MENU is pressed, the “JPEG menu” is displayed. Disp. timeYou can set how many seconds each image is displayed in Slide show mode. (1-10/15/20/30/45/60/120 sec) Repeat Turn the Slide show Repeat function On or Off. Note • For large image sizes, the display time will be longer than the number of seconds set. • To stop in mid-cycle Press select “Picture” ok You can view high-definition art and photography purchased on or downloaded to an SD card. GalleryPlayer provides pre-loaded SD cards with copy-protected imagery and images for download to your computer that can be saved on an SD card for display on your television. In or select “JPEG setup” ok
24 VCR MODE DVD MODE VCR Record Record -Skip Reverse/Forward Rewind/Fast Forward Reverse/Forward Stop Stop Pause Pause Play Play Input select 1 2 3 4 5 6 7TV Component 1 Component 2 HDMI 1 HDMI 2 Video 1 Video 27Video 2 8Video 3 Video 1 VCR With the connected equipment turned On Display the Input select menu Press corresponding NUMBER button on the remote control to select the input of your choice. Select the input of your choice, then press OK. • During the selection, if no action is taken for several seconds, the “Input select” menu disappears. • The terminal and label of the connected equipment is indicated. To label each of the inputs please refer to p. 36-37. (example) or Operate the connected equipment, pointing remote control at the equipment. • For details, see the manual of the equipment. Select the input mode (example) (For other operations, see p. 42) Label (example)Terminal ■ To return to TV Note 4 1 2 select enter Watching Videos and DVDs If you have some equipment connected to the TV, you can easily watch videos and DVDs using the TV’s remote control. Input Select You can select the external equipment to access. To operate other manufacturers’ equipment, you need to register the code of the equipment. (p. 39) 3 Select the remote control mode Press the key to select
25 Viewing Watching Videos and DVDs EZ SyncTM DVD recorder Home theater HD camcorder Speaker output TV Display EZ Sync menu Operate You can operate the selected equipment with the TV’s remote control. Follow the menu of the equipment and enjoy watching. For the remote control operations, refer to p. 31. Select the equipment 3 1 2 select enter If you connect equipment that has “HDAVI Control 2” function to a TV with HDMI cable, you can enjoy using more convenient functions. For details, refer to “EZ Sync Control” on p. 30-31. • For details, see the manual for the equipment or ask your local dealer. Note ■ To return to TV
26 Menu ItemEZ Sync DVD recorder, Home theater, HD camcorder, Speaker output Picture Normal Picture mode Picture, Brightness, Color, Tint, Sharpness Color temp. Color mgmt. Zoom adjust Other adjust Video NR 3D Y/C filter Color matrix Block NR Mosquito NR Black level 3:2 pulldown HD Size Audio Normal Bass Treble Balance Other adjust AI sound Surround Speaker output HDMI 1 in HDMI 2 in Audio leveler TimerSleep, Timer 1-5 Lock Memory CardMemory card Picture 1/2 Normal Picture mode Picture Brightness Color Set Vivid 0 0 0 Tint0 Sharpness0 Menu Audio Lock Setup Memory card Timer Picture EZ Sync Picture 1/2 Normal Picture mode Picture Brightness Color Set Vivid 0 0 0 Tint0 Sharpness0 • Displays the functions that can be set (varies according to the input signal) select next select adjust or select (example: Picture menu) ■ Press to exit from menu screen ■ Press to return to the previous screen Select the menu Select the item 3 2 Adjust or select 4 1 Display menu (example: Picture menu) Various menus allow you to make settings for the picture, sound, and other functions so that you can enjoy watching TV in the way best suited for you.■ Menu list How to Use Menu Functions
27 Advanced How to Use Menu Functions (picture, sound quality, etc.) • In AV mode, the Audio menu and Setup menu give fewer options. Adjustments/Configurations (alternatives) [DVD recorder/Home theater/HD camcorder] Select equipment to access and operate. (p. 30) [Speaker output] Select audio output. (Home theater/TV) (p. 30) EZ Sync menu is accessible directly by pressing the EZ Sync button on the remote control. (p. 25) Resets all picture adjustments to factory default settings except for “Other adjust” (Set/No) NormalSet Basic picture mode (Vivid/Standard/Cinema/Custom) (p. 49)Picture modeVivid Adjusts color, brightness, etc. for each picture mode to suit your tastePicture+20 Brightness0 Color0 Tint0 Sharpness0 Selects level of warm colors (red) and cool colors (blue) (Cool/Normal/Warm)Color temp.Cool On: Enhances green and blue color reproduction, especially outdoor scenes. (On/Off) Color mgmt.On Adjusts vertical alignment and size when aspect setting is “ZOOM” (p. 47)Zoom adjust Reduces noise, commonly called snow. Leave it off when receiving a strong signal. (Off/On)Video NROff Minimizes noise and cross-color in the picture. (On/Off) 3D Y/C filterOff Selects image resolution of component-connected devices (HD/SD) SD: Standard Definition HD: High Definition Only 480p signal accepted; regular TV (NTSC) is not available.Color matrixSD Reduces noise of specific digital signals of DVD, STB, etc. (On/Off)Block NROff Reduces HDTV flicker noise in the contoured sections of an image (Off/On)Mosquito NROff Selects Dark or Light. Valid only for external input signals. (Dark/Light)Black levelLight Transfers film to video. (On/Off)3:2 pulldownOff Selects between 95 % (Size 1) or 100 % (Size 2) for the scanning area when HDTV. (Size 1/ Size 2) Select “Size 1” if noise is generated on the edges of the screen. Size 1: Selected item for “HD size”. Scanning 95 % Size 2: Selected item for “HD size”. Scanning 100 % HD Sizesize1 Resets Bass, Treble and Balance adjustments to factory default settings. (Set/No) NormalSet Increases or decreases the bass response.Bass+ 4 Increases or decreases the treble response.Treble0 Emphasizes the left / right speaker volume.Balance0 Equalizes overall volume levels across all channels and external inputs. (On/Off)AI soundOn Enhances audio response when listening to stereo. (On/Off)SurroundOff Switches to “Off” when using external speakers (On/Off) “AI sound”, “Surround”, and “Audio leveler” do not work if “Off” is selectedSpeaker outputOn Selects according to the signal when HDMI is connected (Auto/Digital/Analog) Auto: Automatically selects Analog / Digital signal HDMI1 inAuto HDMI2 inAuto Minimizes volume disparity after switching to external inputsAudio leveler0 The TV can automatically turn On/Off at the designated date and time (p. 38)Sleep60 Locks the channels and programs (p. 32) Displays SD card data (p. 22) Memory card
28 Menu Item Setup Surf mode Language Clock Program channel External devices Input labels Monitor out CC EZ Sync setting EZ Sync Power off link Power on link Default speakers Other adjust Auto power on Side bar No signal shut-off No action shut-off About Reset Menu Item Setup SUB MENU Surf mode Set favorite CC Caption select Signal meter Setup SUB MENU AllSurf mode Set favorite OffCC Caption select Signal meter Menu Audio Lock Setup Memory card Timer Picture EZ Sync Setup 1/2 All Surf mode Language Clock Program channel External devices CC SUBSUBMENUMENU SUBSUBMENUMENU How to Use Menu Functions ■ Menu list • Displays the functions that can be set (varies according to the input signal) ■ Press to exit from menu screen ■ Press to return to the previous screen 1 Display menu Various menus allow you to make settings for the picture, sound, and other functions so that you can enjoy watching TV in the way best suited for you. select set or next Select the item 2 1 Display SubMenu ■ Sub menu list 2 Select “Setup” 3 2 Select the item next select next select
29 Advanced How to Use Menu Functions (picture, sound quality, etc.) Adjustments/Configurations (alternatives) Sets the mode to select the channel with Channel up/down button (Favorite/All) Favorite: Only channels registered as FAVORITE (p. 35)Surf modeAll Selects the screen menu language (p. 18)Language Adjusts the clock (p. 18)Clock Sets channels (p. 34)Program channel Selects the terminal and label of the external equipment (p. 36) [Comp. 1/Comp. 2/HDMI 1/HDMI 2/Video 1/Video 2/Video 3] To prevent howling and image oscillation, stops output of the pictures and audio specified in this menu. (p. 36) (On/Off) Displays subtitles (Closed Caption) (p. 36) CC Controls equipment connected to HDMI terminals (p. 30) (On/Off) “Power off link”, “Power on link”, and “Default speakers” cannot be selected if “Off” is set.EZ SyncOn Sets “Power off link” of HDMI connection equipment (p. 30) (Set/No)Power off linkSet Sets “Power on link” of HDMI connection equipment (p. 30) (Set/No)Power on linkSet Selects the default speakers (p. 30) (TV/Theater)Default speakersTV Turns TV On automatically when the cable box or a connected device is turned On (No/Set) The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto power on” is set. (p. 38)Auto power onNo Change the brightness of the side bar (Bright/Off/Dark/Mid) (4:3 mode only) The recommended setting is “Bright” to prevent panel “Image retention”. (p. 49)Side barBright To conserve energy, the TV automatically turns off when NO SIGNAL continues more than 10 minutes. (Set/No) Note Not in use when setting “Auto power on”, “On/Off Timer”, “Lock”, “SD Mode”, or Digital channel. “No signal shut-off was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after turning the power off by “No signal shut-off”. The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off. No signal shut-offSet To conserve energy, the TV automatically turns off when no operation of remote or front panel key continues for more than 3 hours. (No/Set) Note Not in use when setting “Auto power on” or “On/Off Timer”. “No action shut-off was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after turning the power off by “No action shut off”. The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off. No action shut-offNo Displays TV version and software license.About Performing Reset will clear all items set with Setup, such as channel settings. (p. 34)Reset Adjustments/Configurations (alternatives) Sets the mode to select the channel with Channel up/down button (Favorite/All) Sets favorite channels. (p. 21) Displays Closed Caption. (p. 36) (Off/On) Changes the station identifier. (p. 34) Checks the signal strength if interference or freezing occurs on a digital image. (p. 34) (Continued)
30 Menu Audio Lock Setup Memory card Timer Picture EZ Sync Setup 2/2 EZ Sync setting Other adjust About EZ Sync setting EZ Sync Power off link Power on link On Set Set SUBSUBMENUMENU EZ Sync TM “HDAVI Control TM ” Simultaneously control all Panasonic “HDAVI Control” equipped components using one button on one remote. Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function. This TV supports “HDAVI Control 2” function. Connections to some Panasonic equipment (DVD Recorder DIGA, HD Camcorder, RAM theater, Player theater, Amplifier, etc.) with HDMI cables allow you to interface automatically. The equipment with “HDAVI Control” function enables the following operations: Automatic Input Switching, Power on link, Power off link and Speaker control (p. 31). In addition, the equipment with “HDAVI Control 2” function enables the following operation: EZ Sync Control only with TV’s remote control (for “HDAVI Control 2”) (p. 31). EZ Sync “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed. ■ For the first time / When adding new equipment, reconnecting the equipment or changing the setup. After the connection turn the equipment on and then switch the TV on. Select the input mode to HDMI 1 or HDMI 2 (p. 24), and make sure that an image is displayed correctly. • This function needs an HDMI compliant (fully wired) cable. Non-HDMI-compliant cables cannot be utilized. It is recommended that you use Panasonic’s HDMI cable. Recommended part number: RP-CDHG15 (4.9 ft/1.5 m), RP-CDHG30 (9.8 ft/3.0 m), RP-CDHG50 (16.4 ft/5.0 m) ■ Press to exit from menu screen ■ Press to return to the previous screen Select “Setup” Select “EZ Sync setting” 3 Select “EZ Sync” 4 select next Display menu Select “On” (default is On)5 Automatic Input Switching 1 2 • If no HDMI equipment is connected or standard HDMI equipment (non- “EZ Sync”) is used, set to “Off”. select next select change Power on link Power off link Speaker control One-touch theater playback EZ Sync Control only with TV’s remote control (for “HDAVI Control 2”) Default speakers