Panasonic Hd Plasma Television Th 42px77 Operating Instructions
Have a look at the manual Panasonic Hd Plasma Television Th 42px77 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 6
6
7
Quick Start Guide
Accessories/Optional Accessory
A
a
b
B
Accessories/Optional Accessory
1
Open
Hook
2Note the correct polarity
(+ or -). CloseCaution
Wall-hanging bracket
Accessories
(angle)
• TY-WK42PR2U
• TY-WK42PR3U
Caution
Do not use any television or displays other than those given in this Ope\
rating Instructions.
• Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
• If you use the...](http://img.usermanuals.tech/thumb/58/71533/w64_th-42px77_en_om_d-5.png "Page 6
6
7
Quick Start Guide
Accessories/Optional Accessory
A
a
b
B
Accessories/Optional Accessory
1
Open
Hook
2Note the correct polarity
(+ or -). CloseCaution
Wall-hanging bracket
Accessories
(angle)
• TY-WK42PR2U
• TY-WK42PR3U
Caution
Do not use any television or displays other than those given in this Ope\
rating Instructions.
• Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
• If you use the...")
![Page 7
6
7
Quick Start Guide
Accessories/Optional Accessory
A
a
b
B
Accessories/Optional Accessory
1
Open
Hook
2Note the correct polarity
(+ or -). CloseCaution
Wall-hanging bracket
Accessories
(angle)
• TY-WK42PR2U
• TY-WK42PR3U
Caution
Do not use any television or displays other than those given in this Ope\
rating Instructions.
• Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
• If you use the...](http://img.usermanuals.tech/thumb/58/71533/w64_th-42px77_en_om_d-6.png "Page 7
6
7
Quick Start Guide
Accessories/Optional Accessory
A
a
b
B
Accessories/Optional Accessory
1
Open
Hook
2Note the correct polarity
(+ or -). CloseCaution
Wall-hanging bracket
Accessories
(angle)
• TY-WK42PR2U
• TY-WK42PR3U
Caution
Do not use any television or displays other than those given in this Ope\
rating Instructions.
• Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
• If you use the...")
![Page 16
16
17
Quick Start Guide
Identifying Controls
Basic Connection (TV + Home Theater + DVD Recorder)
To connect HDMI terminals
RLHDMI 1AUDIO IN
VIDEO
S VIDEO
PRPBY
DIGITALAUDIO OUT
HDMI 2AUDIO INAV IN 1AV IN 2
ANTENNACable In
-
SUBSU BMENUM EN U
-
ANTENNACable InANTENNACable In
Identifying Controls
• The TV consumes a limited amount of power as long as the power cord is inser\
ted into the wall outlet.
Note
Basic Connection (Continued)
Example 4Connecting Home Theater and DVD recorder
Home...](http://img.usermanuals.tech/thumb/58/71533/w64_th-42px77_en_om_d-15.png "Page 16
16
17
Quick Start Guide
Identifying Controls
Basic Connection (TV + Home Theater + DVD Recorder)
To connect HDMI terminals
RLHDMI 1AUDIO IN
VIDEO
S VIDEO
PRPBY
DIGITALAUDIO OUT
HDMI 2AUDIO INAV IN 1AV IN 2
ANTENNACable In
-
SUBSU BMENUM EN U
-
ANTENNACable InANTENNACable In
Identifying Controls
• The TV consumes a limited amount of power as long as the power cord is inser\
ted into the wall outlet.
Note
Basic Connection (Continued)
Example 4Connecting Home Theater and DVD recorder
Home...")
10
11
Quick Start Guide
Basic Connection (Antenna + TV)
Before Connection
To connect antenna terminals
Reference of connection
ANT OUTANT IN
VIDEO
VIDEO
S VIDEO
PRPBY
P
RPBY
ANTENNACable In
HDMI 2AUDIO INAV IN 1AV I N 2
RLHDMI 1AUDIO INDIGITALAUDIO OUT
ANTENNACable In
Before Connection
■Antenna terminal■Pin terminals■HDMI terminal
• Firmly tighten by hand.• Match colors of plugs and terminals.
• Insert firmly.• Insert firmly.
Connected Equipment Introduction (Signal source)
Basic Connection
Connecting Antenna (To watch TV)Example 1
VHF/UHF Antenna Cable Box/ Cable
or
(If no Cable Box)
■ Recording/playing back with DVD recorder or VCR
• DVD Recorder
This source has higher resolution through interlace or progressive signa\
l.
Connection can be done with the use of Component Video or HDMI cable.
• VCRConnection can be done with the use of an RF cable and Composite Video/S Video cable.
■Watching Satellite
• You can enjoy high-definition programming by subscribing to
high-definition satellite source. Connection can be done with the use of\
HDMI or Component Video cable.
• If using Cable Box
•Set the TV channel to CH3 or CH4. AC Cord
(Connect after all the
other connections.)
Cable TV
VHF/UHF Antenna
TV
Back of the TV
Cable TV
AC 120 V
60 Hz VHF/UHF Antenna
Cable Box
Antenna
terminal
Satellite
Receiver
Satellite Antenna
green
blue
red
green
Note
•When disconnecting the power cord, be absolutely sure to disconnect the \
power cord plug at the wall outlet first.
• For additional assistance, visit us at: www.panasonic.com
www.panasonic.ca
Note
• If your Panasonic DVD Recorder is compatible with EZ Sync (HDAVI control 2), you can operate your Panasonic
DVD Recorder with this TV’s remote control (p. 25 EZ SyncTM).
• All cables and external equipment shown in this book are not supplied wi\
th the TV.
• For the details of the external equipment’s connections, please refer to the operating manuals of the equipment.
■ Enjoying Home theater and DVD recorder with
HDMI connection
• Home theater and DVD Recorder
HDMI connection enables you to enjoy higher quality audio and video with\
a single cable. DVD Recorder
Home Theater DVD Recorder
■Watching TV
• VHF/UHF Antenna
•NTSC (National Television System Committee):
Conventional broadcasting
•ATSC (Advanced Television Systems Committee):
Digital TV Standards include digital high-definition television (HDTV),
standard-definition television (SDTV), data broadcasting, multi-channe\
l
surround-sound audio and interactive television.
• Cable Box/Cable
• You need to subscribe to a cable TV service to enjoy viewing their
programming.
• You can enjoy high-definition programming by subscribing to a high-defini\
tion cable box. The connection can be
done with the use of HDMI or Component Video cable.
VCR
or
oror
12 13 Quick Start Guide Basic Connection(TV + DVD Recorder or VCR) To connect antenna terminals High-Definition Standard-Definition HDMI 2AUDIO INAV IN 1AV IN 2 L R Y P B PR INPUT 1 COMPONENTVIDEO INPUT RPRPBY P RPBYR L L TO INPUT 2 S VIDEOPROG R R L L L R ANT OUTANT IN ANTENNACable In HDMI 2AUDIO INAV IN 1AV IN 2 RLHDMI 1AUDIO INDIGITALAUDIO OUT TO AUDIO AMP COMPONENTVIDEO INPUT INPUT 1 INPUT 2 AUDIO AUDIO VIDEO VIDEO S VIDEOPROGOUT RPRPBY P RPBYR R R L L L L R L ANTENNACable In L R INPUT 1 PRPBYR RL L Basic Connection (Continued) Connecting DVD recorder (VCR) (To record/playback)Example 2 ■To use HDMI terminals ■To use COMPONENT terminals To use HDMI terminals (next page) To use COMPONENT terminals (next page) To use COMPOSITE terminals (next page) • Recorders may also be connected to COMPOSITE or S VIDEO terminals. (see\ below) •Some programs contain a copyright protection signal to prevent recording\ . • When the copyright protection program is displayed, do not connect the o\ ther TV monitor through a VCR. Video signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted\ on the other TV monitor. Note VHF/UHF AntennaDVD Recorder or VCR TV Back of the TV AC Cord AC 120 V 60 Hz VHF/UHF Antenna DVD Recorder or VCR (with TV tuner) Antenna terminal DVD Recorder DVD Recorder HDMI AV OUT COMPONENT VIDEO OUT AUDIO OUTwhite red green blue redwhite red green blue white redwhite red AUDIO OUT S VIDEO OUT red ■ To use COMPOSITE terminals ■To use S VIDEO terminals VCR COMPOSITE OUT yellow white redyellow white red VCR • The S Video input will override the composite video signal when S Video cable is connected. Connect either S Video or Video cable.• Connecting to S VIDEO terminals will enable you to enjoy greater picture quality than using Composite terminals. white red green bluered white red yellow white red • Connecting to HDMI terminals will enable you to enjoy high-definition di\ gital images and high-quality sound. or DVD Recorder or DVD Recorder To use S VIDEO terminals (next page) To use PROG OUT terminals (p. 40, 41)
12 13 Quick Start Guide Basic Connection(TV + DVD Recorder or VCR) To connect antenna terminals High-Definition Standard-Definition HDMI 2AUDIO INAV IN 1AV IN 2 L R Y P B PR INPUT 1 COMPONENTVIDEO INPUT RPRPBY P RPBYR L L TO INPUT 2 S VIDEOPROG R R L L L R ANT OUTANT IN ANTENNACable In HDMI 2AUDIO INAV IN 1AV IN 2 RLHDMI 1AUDIO INDIGITALAUDIO OUT TO AUDIO AMP COMPONENTVIDEO INPUT INPUT 1 INPUT 2 AUDIO AUDIO VIDEO VIDEO S VIDEOPROGOUT RPRPBY P RPBYR R R L L L L R L ANTENNACable In L R INPUT 1 PRPBYR RL L Basic Connection (Continued) Connecting DVD recorder (VCR) (To record/playback)Example 2 ■To use HDMI terminals ■To use COMPONENT terminals To use HDMI terminals (next page) To use COMPONENT terminals (next page) To use COMPOSITE terminals (next page) • Recorders may also be connected to COMPOSITE or S VIDEO terminals. (see\ below) •Some programs contain a copyright protection signal to prevent recording\ . • When the copyright protection program is displayed, do not connect the o\ ther TV monitor through a VCR. Video signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted\ on the other TV monitor. Note VHF/UHF AntennaDVD Recorder or VCR TV Back of the TV AC Cord AC 120 V 60 Hz VHF/UHF Antenna DVD Recorder or VCR (with TV tuner) Antenna terminal DVD Recorder DVD Recorder HDMI AV OUT COMPONENT VIDEO OUT AUDIO OUTwhite red green blue redwhite red green blue white redwhite red AUDIO OUT S VIDEO OUT red ■ To use COMPOSITE terminals ■To use S VIDEO terminals VCR COMPOSITE OUT yellow white redyellow white red VCR • The S Video input will override the composite video signal when S Video cable is connected. Connect either S Video or Video cable.• Connecting to S VIDEO terminals will enable you to enjoy greater picture quality than using Composite terminals. white red green bluered white red yellow white red • Connecting to HDMI terminals will enable you to enjoy high-definition di\ gital images and high-quality sound. or DVD Recorder or DVD Recorder To use S VIDEO terminals (next page) To use PROG OUT terminals (p. 40, 41)
14 15 Quick Start Guide Basic Connection(TV + DVD Recorder or VCR + Satellite receiver) To connect antenna terminals Connecting TV and DVD recorder (VCR) To connect DVD recorder and satellite receiver To connect VCR andsatellite receiver ANTENNACable In ANT INANT OUTANT IN TO AUDIO AMP COMPONENTVIDEO INPUT INPUT 1 INPUT 2 AUDIO AUDIO VIDEO VIDEO S VIDEOPROGOUT RPRPBY P RPBYR R R L L L L R L ANTENNACable In HDMI 2AUDIO INAV IN 1AV IN 2 RLHDMI 1AUDIO INDIGITALAUDIO OUT L R L R Y PB L R P R L R Y P B PR L R L R Example 3Connecting DVD recorder (VCR) and satellite receiver Connect in the same way as on p. 13. Basic Connection (Continued) DVD Recorder or VCR Satellite Receiver TV Satellite Receiver DVD Recorder or VCR (with TV tuner) white redwhite red green blue redgreenbluered ■To use HDMI terminals ■To use COMPONENT terminals • Satellite Receiver may also be connected to COMPOSITE or S VIDEO termina\ ls. (see below) Satellite Receiver Satellite Receiver HDMI AV OUT white red white redAUDIO OUT S VIDEO OUT DVD Recorder DVD Recorder ■To use COMPOSITE terminals ■To use S VIDEO terminals Satellite ReceiverCOMPOSITE OUTVCR VCRyellow white redyellow white red Satellite Receiver • The S Video input will override the composite video signal when S Video cable is connected. Connect either S Video or Video cable.• Connecting to S VIDEO terminals will enable you to enjoy greater picture quality than using Composite terminals. AUDIO OUT white red yellow white red whitered green bluered white red yellow white red white red green bluered COMPONENT VIDEO OUT AUDIO IN COMPONENT VIDEO IN S VIDEO IN AUDIO IN HDMI AV IN COMPOSITEIN VHF/UHF Antenna • Connecting to HDMI terminals will enable you to enjoy high-definition di\ gital images and high-quality sound. VHF/UHF Antenna Back of the TV AC Cord AC 120 V 60 Hz Antenna terminal To use HDMI terminals (p. 13) To use COMPONENT terminals (p. 13) To use COMPOSITE terminals (p. 13) To use S VIDEO terminals (p. 13)
14 15 Quick Start Guide Basic Connection(TV + DVD Recorder or VCR + Satellite receiver) To connect antenna terminals Connecting TV and DVD recorder (VCR) To connect DVD recorder and satellite receiver To connect VCR andsatellite receiver ANTENNACable In ANT INANT OUTANT IN TO AUDIO AMP COMPONENTVIDEO INPUT INPUT 1 INPUT 2 AUDIO AUDIO VIDEO VIDEO S VIDEOPROGOUT RPRPBY P RPBYR R R L L L L R L ANTENNACable In HDMI 2AUDIO INAV IN 1AV IN 2 RLHDMI 1AUDIO INDIGITALAUDIO OUT L R L R Y PB L R P R L R Y P B PR L R L R Example 3Connecting DVD recorder (VCR) and satellite receiver Connect in the same way as on p. 13. Basic Connection (Continued) DVD Recorder or VCR Satellite Receiver TV Satellite Receiver DVD Recorder or VCR (with TV tuner) white redwhite red green blue redgreenbluered ■To use HDMI terminals ■To use COMPONENT terminals • Satellite Receiver may also be connected to COMPOSITE or S VIDEO termina\ ls. (see below) Satellite Receiver Satellite Receiver HDMI AV OUT white red white redAUDIO OUT S VIDEO OUT DVD Recorder DVD Recorder ■To use COMPOSITE terminals ■To use S VIDEO terminals Satellite ReceiverCOMPOSITE OUTVCR VCRyellow white redyellow white red Satellite Receiver • The S Video input will override the composite video signal when S Video cable is connected. Connect either S Video or Video cable.• Connecting to S VIDEO terminals will enable you to enjoy greater picture quality than using Composite terminals. AUDIO OUT white red yellow white red whitered green bluered white red yellow white red white red green bluered COMPONENT VIDEO OUT AUDIO IN COMPONENT VIDEO IN S VIDEO IN AUDIO IN HDMI AV IN COMPOSITEIN VHF/UHF Antenna • Connecting to HDMI terminals will enable you to enjoy high-definition di\ gital images and high-quality sound. VHF/UHF Antenna Back of the TV AC Cord AC 120 V 60 Hz Antenna terminal To use HDMI terminals (p. 13) To use COMPONENT terminals (p. 13) To use COMPOSITE terminals (p. 13) To use S VIDEO terminals (p. 13)
16 17 Quick Start Guide Identifying Controls Basic Connection (TV + Home Theater + DVD Recorder) To connect HDMI terminals RLHDMI 1AUDIO IN VIDEO S VIDEO PRPBY DIGITALAUDIO OUT HDMI 2AUDIO INAV IN 1AV IN 2 ANTENNACable In - SUBSU BMENUM EN U - ANTENNACable InANTENNACable In Identifying Controls • The TV consumes a limited amount of power as long as the power cord is inser\ ted into the wall outlet. Note Basic Connection (Continued) Example 4Connecting Home Theater and DVD recorder Home Theater DVD Recorder TV DIGITAL AUDIO IN DVD Recorder Home Theater (AV amp) HDMI AV OUT HDMI AV I N HDMI AV OUT • It is recommended that you use Panasonic’s HDMI cable. (P. 30) • When Using the COMPONENT VIDEO OUT terminals or the S VIDEO OUT terminal, refer to p. 15 “To use COMPONENT terminals” or “To use S VIDEO terminals”. • If you connect RAM theater or Player theater with HDMI cable, use audio \ cable instead of the optical digital audio cable. (p. 41) Note or Home theater (HDMI AV OUT)Home theater (DIGITAL AUDIO IN) (When listening to TV audio) [ATSC only] Cable Binding Instructions Switches TV/VIDEO POWER button Remote control sensor Within about 23 feet (7 meters) in front of the TV set.Volume up/down Power indicator (on: red, off: no light) Selects channels in sequenceBack of the TV Switches TV to On or Standby Viewing from SD Card (p. 22-23) The equipment selection button (p. 24) Changes the input mode (p. 24) Displays Sub Menu (p. 20, 28) Colored buttons (used for various functions) (for example p. 22, 34) Channel up/down Changes aspect ratio (p. 21) Operates the Favorite channel list function. (p. 21) Switches to previously viewed channel and input modes.EZ Sync menu (p. 25, 30-31) Selects Audio Mode for TV viewing (p. 20) Displays Main Menu (p. 26) Exits menus Selects/OK/Change Returns to previous menu Volume up/down Displays or removes the channel banner (p. 20) Sound mute On/Off Numeric keypad to select any channel (p. 20) or press to enter alphanumeric input in menus. (p. 24, 25, 32, 34, 39) Direct channel access for DTV and DBS (p. 20) External equipment operations (VCRs, DVDs, etc.) (p. 24) Front of the TV Back of the TV • Do not bundle the RF cable and AC cord together (could cause distorted image). • Fix cables with Cable clamper and Band as necessary. • When using the options, follow the option’s assembly manual to fix cables. Push until clicks To fix Press catch in and pull away To release To attach hole Insert To bundle To remove To loosen Keep pushing both side snaps Snaps Set hooks knobKeep pushing the knob AC cord Accessories Band (2) (Supplied with Pedestal) Insert To attach To fasten To loosen tab Band Cable clamper
16 17 Quick Start Guide Identifying Controls Basic Connection (TV + Home Theater + DVD Recorder) To connect HDMI terminals RLHDMI 1AUDIO IN VIDEO S VIDEO PRPBY DIGITALAUDIO OUT HDMI 2AUDIO INAV IN 1AV IN 2 ANTENNACable In - SUBSU BMENUM EN U - ANTENNACable InANTENNACable In Identifying Controls • The TV consumes a limited amount of power as long as the power cord is inser\ ted into the wall outlet. Note Basic Connection (Continued) Example 4Connecting Home Theater and DVD recorder Home Theater DVD Recorder TV DIGITAL AUDIO IN DVD Recorder Home Theater (AV amp) HDMI AV OUT HDMI AV I N HDMI AV OUT • It is recommended that you use Panasonic’s HDMI cable. (P. 30) • When Using the COMPONENT VIDEO OUT terminals or the S VIDEO OUT terminal, refer to p. 15 “To use COMPONENT terminals” or “To use S VIDEO terminals”. • If you connect RAM theater or Player theater with HDMI cable, use audio \ cable instead of the optical digital audio cable. (p. 41) Note or Home theater (HDMI AV OUT)Home theater (DIGITAL AUDIO IN) (When listening to TV audio) [ATSC only] Cable Binding Instructions Switches TV/VIDEO POWER button Remote control sensor Within about 23 feet (7 meters) in front of the TV set.Volume up/down Power indicator (on: red, off: no light) Selects channels in sequenceBack of the TV Switches TV to On or Standby Viewing from SD Card (p. 22-23) The equipment selection button (p. 24) Changes the input mode (p. 24) Displays Sub Menu (p. 20, 28) Colored buttons (used for various functions) (for example p. 22, 34) Channel up/down Changes aspect ratio (p. 21) Operates the Favorite channel list function. (p. 21) Switches to previously viewed channel and input modes.EZ Sync menu (p. 25, 30-31) Selects Audio Mode for TV viewing (p. 20) Displays Main Menu (p. 26) Exits menus Selects/OK/Change Returns to previous menu Volume up/down Displays or removes the channel banner (p. 20) Sound mute On/Off Numeric keypad to select any channel (p. 20) or press to enter alphanumeric input in menus. (p. 24, 25, 32, 34, 39) Direct channel access for DTV and DBS (p. 20) External equipment operations (VCRs, DVDs, etc.) (p. 24) Front of the TV Back of the TV • Do not bundle the RF cable and AC cord together (could cause distorted image). • Fix cables with Cable clamper and Band as necessary. • When using the options, follow the option’s assembly manual to fix cables. Push until clicks To fix Press catch in and pull away To release To attach hole Insert To bundle To remove To loosen Keep pushing both side snaps Snaps Set hooks knobKeep pushing the knob AC cord Accessories Band (2) (Supplied with Pedestal) Insert To attach To fasten To loosen tab Band Cable clamper
18 19 Quick Start Guide First Time Setup First time setup Language Auto program Picture Clock Language EnglishLanguage Program channel CableANT in Auto Auto program progress Scanning digital channel quit 40% Caption Favorite Add ApplyCancelprogram ... . Ye s ... . Ye s ... . Ye s First time setup Auto program Picture Language Clock Clock 2007Ye a r Month 7 1 Day Hour 10 10 AM Minute First time setup Picture Language Clock Auto program Program channel CableANT in Auto Auto program All channels Analog only Digital only First time setup Picture Language Clock Auto program or next select select “Apply” ok next select set select First Time Setup “First time setup” is displayed only when the TV is turned on for the first time after the power cord is inserted into a wall outlet and when “Auto power on” (p. 28-29) \ is set to “No”. Turn the TV On with the POWER button 1 Select your language 2 Adjust the clock 3 Year: Select the year Month: Select the month Day: Select the day Hour: Adjust the hour Minute: Adjust the minute Go back to previous screen. ■ Press to exit from menu screen ■ Press to return to previous screen Note • To change setting (Language/Clock/Auto program/Picture) later, go to Menu screen (p. 26, 28) English Español Français next select set select item ANT in Cable: Cable TV Antenna: Antenna Auto channel setup 4 Select “Auto” Select “Auto program” Select “ANT in” 5 Confirm registered channels • Available channels (analog/digital) are automatically set. • If OK is not pressed after selecting “Apply”, the channels will no\ t be saved. • If you perform scanning more than twice, previously saved channels are e\ rased. Note • About broadcasting systems Analog (NTSC): traditional TV programming Digital (ATSC): new programming that allows you to view more channels featuring high-quality video and sound ■ Press to exit from menu screen ok select All channels: Scans digital and analog channels Analog only: Scans Analog channels only Digital only: Scans Digital channels only Start scanning the channels Select scanning mode (ALL channels/Analog only/Digital only) Go back to previous screen. or (Refer to p. 26) next select (TV) (Remote)
18 19 Quick Start Guide First Time Setup First time setup Language Auto program Picture Clock Language EnglishLanguage Program channel CableANT in Auto Auto program progress Scanning digital channel quit 40% Caption Favorite Add ApplyCancelprogram ... . Ye s ... . Ye s ... . Ye s First time setup Auto program Picture Language Clock Clock 2007Ye a r Month 7 1 Day Hour 10 10 AM Minute First time setup Picture Language Clock Auto program Program channel CableANT in Auto Auto program All channels Analog only Digital only First time setup Picture Language Clock Auto program or next select select “Apply” ok next select set select First Time Setup “First time setup” is displayed only when the TV is turned on for the first time after the power cord is inserted into a wall outlet and when “Auto power on” (p. 28-29) \ is set to “No”. Turn the TV On with the POWER button 1 Select your language 2 Adjust the clock 3 Year: Select the year Month: Select the month Day: Select the day Hour: Adjust the hour Minute: Adjust the minute Go back to previous screen. ■ Press to exit from menu screen ■ Press to return to previous screen Note • To change setting (Language/Clock/Auto program/Picture) later, go to Menu screen (p. 26, 28) English Español Français next select set select item ANT in Cable: Cable TV Antenna: Antenna Auto channel setup 4 Select “Auto” Select “Auto program” Select “ANT in” 5 Confirm registered channels • Available channels (analog/digital) are automatically set. • If OK is not pressed after selecting “Apply”, the channels will no\ t be saved. • If you perform scanning more than twice, previously saved channels are e\ rased. Note • About broadcasting systems Analog (NTSC): traditional TV programming Digital (ATSC): new programming that allows you to view more channels featuring high-quality video and sound ■ Press to exit from menu screen ok select All channels: Scans digital and analog channels Analog only: Scans Analog channels only Digital only: Scans Digital channels only Start scanning the channels Select scanning mode (ALL channels/Analog only/Digital only) Go back to previous screen. or (Refer to p. 26) next select (TV) (Remote)
20 21 Viewing Watching TV 15-2 12:30 pm30THE NEWS CC SAP TV-G 1 0 8 0 i Standard 4:3ABC-HD Setup SUB MENU AllSurf mode Set favorite OffCC Caption select Signal meter Favorite channels1/3 1 2 3 4 26-1 - - - Set favorite 1/3 1 2 3 --- --- --- --- 4 Setup SUB MENU AllSurf mode Set favorite OffCC Caption select Signal meter Setup SUB MENUAllSurf mode Set favorite OffCC Caption select Signal meter Set favorite 1/31 2 3 4 26-1 - - - - SUBS U BMENUM EN U SUBSU BMENUM EN U Watching TV Connect the TV to a cable box/cable, set-top-box, satellite box, or antenna cable (\ p. 10-15) 12 Turn power on Select a channel number up down or ■ To directly input the digital channel number example: CH15-1: - ■ Other Useful Functions (Operate after ) Display the SUB MENU Listen with SAP (Secondary Audio Program) ■ Selects Audio Mode for watching TV • Digital mode Press SAP to select the next audio track (if available) when receiving a digita\ l channel. Audio track 1 of 2 (English) • Analog mode Press SAP to select the desired audio mode. • Each press of SAP will change the audio mode. (Stereo/SAP/Mono) ■ Press SUB MENU to show sub menu screen. (p. 28) This menu consists of shortcuts to convenient functions. Change aspect ratio Call up a favorite channel ■ Press ASPECT to cycle through the aspect modes. (p. 47) • 480i, 480p: FULL/JUST/4:3/ZOOM • 1080p, 1080i, 720p: FULL/H-FILL/JUST/4:3/ZOOM ■ FAVORITE Channel numbers registered in Favorite are displayed on the favorite tun\ e screen. Select the desired broadcast station with the cursor or use numb\ er buttons. (see below) Note • Reselect “Cable” or “Antenna” in “ANT in” of “Program channel” to switch the signal reception betwee\ n cable TV and antenna. (p. 19, 35) • The channel number and volume level remain the same even after the TV is turned off. 1 Press FAVORITE. • Press FAVORITE repeatedly to change between pages (1/3, 2/3, 3/3, or exit). 2 Press ▲▼ or a Numbered key (1-9 and 0) to highlight a channel on the list. • Selecting a channel number from the list with the number button will display the channel directly. 3 Press OK to display the highlighted channel. Use Favorite Feature select ok -When tuning to a digital channel, press the button to enter the minor number in a compound channel number. Note• If the mode is not TV, press and select TV. (p. 24) Information Recall ■ Displays or removes the channel banner. Channel Station identifier SAP indication Signal resolution Rating Level Picture mode Sleep timer remaining time Aspect ratio Closed caption Clock • To change the page Pressing ◄ changes the page backward. Pressing ► changes the page forward. 1 Display the SUB MENU. 2 • Press FAVORITE repeatedly to change between pages (1/3, 2/3, 3/3, or exit). 3 Press ▲▼to highlight a position on the list. Then, press OK to save the displayed channel in that position. • You can also use the NUMBER buttons (1-9 and 0) to select a list number (1-9 and 0). By doing so, the displayed channel will be saved on that list number without pressing OK. • To delete a favorite channel A saved channel can be removed from the list by holding down OK while its position is highlighted. Set Favorite Feature select ok select “Set favorite” ok