Panasonic Hd Plasma Television Th 42px75 Operating Instructions

							
Panasonic Consumer Electronics
Company,
Division of Panasonic Corporation
of North America
One Panasonic Way, Secaucus
New Jersey 07094 U.S.A.Panasonic Puerto Rico, Inc.
Ave. 65 de Infanteria, Km. 9.5
San Gabriel Industrial Park
Carolina, Puerto Rico 00985
Panasonic Canada Inc.
5770 Ambler  Drive
Mississauga, Ontario
L4W 2T3 CANADA
©
 2007 Panasonic Corporation of North America. All Rights Reserved.
©  2007 Panasonic Corporation of North America. Todos los Derechos Reservados. Printed in U.S.A.
Impreso en EE.UU.
Anotación del cliente
El modelo y el número de serie de este producto se encuentran en su p\
anel posterior. Deberá anotarlos en el 
espacio provisto a continuación y guardar este manual, más el reci\
bo de su compra, como prueba permanente de 
su adquisición, para que le sirva de ayuda al identificarlo en el cas\
o de que le sea sustraído o lo pierda, y también 
para disponer de los servicios que le ofrece la garantía.
Modelo       Número de serie     
Customer’s Record
The model number and serial number of this product can be found on its b\
ack cover. You should note this serial 
number in the space provided below and retain this book, plus your purch\
ase receipt, as a permanent record of 
your purchase to aid in identification in the event of theft or loss, an\
d for Warranty Service purposes.
Model Number      Serial Number      

Model No.
Número de modelo
Español English
Please read these instructions before operating your set and retain them\
 for future reference.
The images shown in this manual are for illustrative purposes only.
Lea estas instrucciones antes de utilizar su televisor y guárdelas pa\
ra consultarlas en el futuro.
Las imágenes mostradas en este manual tienen solamente fines ilustrat\
ivos.
  For assistance (U.S.A.), please call: 
 1-888-VIEW-PTV (843-9788)
or visit us at www.panasonic.com/contactinfo 
  For assistance (Puerto Rico), please call: 
 787-750-4300
or visit us at www.panasonic.com 
  For assistance (Canada), please call: 
 1-800-561-5505
or visit us at www.panasonic.ca
 Para solicitar ayuda (EE.UU.), llame al: 
 1-888-VIEW-PTV (843-9788)
    
ó visítenos en www.panasonic.com/contactinfo 
 Para solicitar ayuda (Puerto Rico), llame al: 
 787-750-4300
ó visítenos en www.panasonic.com 
Quick Start Guide
(See page 6)
Guía de inicio rápido
 (vea la página 6)
TQB2AA0751-2
Operating Instructions
  High Definition Plasma Television Manual de instrucciones
Televisor de plasma de alta definición
TH-42PX75U
TH-50PX75U 
						

							
2
3
Viewing
Advanced
FAQs, etc.
Quick Start Guide

Contents

SDHC Logo is a trademark.
GalleryPlayer and the 
GalleryPlayer Logo are 
trademarks of GalleryPlayer, Inc.
EZ Sync™
EZ Sync™ is a trademark of Matsushita Electric Industrial Co., Ltd.

HDMI, the HDMI logo and High-Definition Multimedia Interface are  trademarks or registered trademarks of HDMI Licensing LLC.
HDAVI Control™
HDAVI Control™ is a trademark of Matsushita Electric Industrial Co., Ltd\
.
Manufactured under license from Dolby Laboratories. DOLBY and the double-D symbol are trademarks of Dolby Laboratories.
Experience an amazing level of multimedia excitement
Turn your own living room into a movie theater!

Enjoy rich multimedia
SD memory card
Camcorder
Amplifier
Home theater 
system VCR DVD player
DVD recorder Set Top Box
• Watching TV  ··················\
··················\
··········· 20
• Viewing from SD Card ··················\
············· 22
• Watching Videos and DVDs ··················\
····· 24
• How to Use Menu Functions 
(picture, sound quality, etc.) ··················\
····· 26
• EZ SyncTM “HDAVI ControlTM” ··················\
··· 30
• Lock ·················\
··················\
··················\
······ 32
• Editing and Setting Channels ···········\
········· 34
• Input Labels/Monitor out/Closed Caption ······· 36
• Using Timer ··················\
··················\
············ 38
• Recommended AV  Connections ················ 40
• Ratings List for Lock ··················\
················ 42
• Technical Information ··················\
··············· 43
• Maintenance ···············\
··················\
············· 46
• Specifications ···············\
··················\
············ 47
• FAQ ··················\
··················\
··················\
······ 48
• Limited Warranty (for U.S.A.) ··················\
··· 50
• Customer Services Directory (for U. S. A.) ···· 51
• Limited Warranty (for Canada) ··················\
· 52
Enjoy your TV!
Basic Features
Advanced Features
FAQs, etc.
• Safety Precautions ··················\
··················\
··· 4
• Notes  ··················\
··················\
··················\
······ 5
Please read before using the unit
•Accessories/Optional Accessory ··· 6
•
To Prevent TV from falling over  ··· 8
•Before Connection ··················\
···· 10
•Basic Connection ··················\
·······11
•
Identifying Controls  ··················\
·· 17
•First Time Setup ··················\
········ 18
Quick Start Guide 
						

							
2
3
Viewing
Advanced
FAQs, etc.
Quick Start Guide

Contents

SDHC Logo is a trademark.
GalleryPlayer and the 
GalleryPlayer Logo are 
trademarks of GalleryPlayer, Inc.
EZ Sync™
EZ Sync™ is a trademark of Matsushita Electric Industrial Co., Ltd.

HDMI, the HDMI logo and High-Definition Multimedia Interface are  trademarks or registered trademarks of HDMI Licensing LLC.
HDAVI Control™
HDAVI Control™ is a trademark of Matsushita Electric Industrial Co., Ltd\
.
Manufactured under license from Dolby Laboratories. DOLBY and the double-D symbol are trademarks of Dolby Laboratories.
Experience an amazing level of multimedia excitement
Turn your own living room into a movie theater!

Enjoy rich multimedia
SD memory card
Camcorder
Amplifier
Home theater 
system VCR DVD player
DVD recorder Set Top Box
• Watching TV  ··················\
··················\
··········· 20
• Viewing from SD Card ··················\
············· 22
• Watching Videos and DVDs ··················\
····· 24
• How to Use Menu Functions 
(picture, sound quality, etc.) ··················\
····· 26
• EZ SyncTM “HDAVI ControlTM” ··················\
··· 30
• Lock ·················\
··················\
··················\
······ 32
• Editing and Setting Channels ···········\
········· 34
• Input Labels/Monitor out/Closed Caption ······· 36
• Using Timer ··················\
··················\
············ 38
• Recommended AV  Connections ················ 40
• Ratings List for Lock ··················\
················ 42
• Technical Information ··················\
··············· 43
• Maintenance ···············\
··················\
············· 46
• Specifications ···············\
··················\
············ 47
• FAQ ··················\
··················\
··················\
······ 48
• Limited Warranty (for U.S.A.) ··················\
··· 50
• Customer Services Directory (for U. S. A.) ···· 51
• Limited Warranty (for Canada) ··················\
· 52
Enjoy your TV!
Basic Features
Advanced Features
FAQs, etc.
• Safety Precautions ··················\
··················\
··· 4
• Notes  ··················\
··················\
··················\
······ 5
Please read before using the unit
•Accessories/Optional Accessory ··· 6
•
To Prevent TV from falling over  ··· 8
•Before Connection ··················\
···· 10
•Basic Connection ··················\
·······11
•
Identifying Controls  ··················\
·· 17
•First Time Setup ··················\
········ 18
Quick Start Guide 
						

							
4
5

WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service p\
ersonnel.

4 : 3 
12

CAUTION
RISK OF ELECTRIC SHOCKDO NOT OPEN

Safety Precautions
1)  Read these instructions.
2)  Keep these instructions.
3)  Heed all warnings.
4)  Follow all instructions.
5)  Do not use this apparatus near water.
6)  Clean only with dry cloth.
7)  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8)  Do not install near any heat sources such as radiators, heat  registers, stoves, or other apparatus (including amplifiers) 
that produce heat.
9)  Do not defeat the safety purpose of the polarized or  grounding-type plug. A polarized plug has two blades with 
one wider than the other. A grounding type plug has two 
blades and a third grounding prong. The wide blade or the 
third prong are provided for your safety. If the provided 
plug does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched  particularly at plugs, convenience receptacles, and the 
point where they exit from the apparatus. 11) Only use attachments / accessories specified by the 
manufacturer.
12) Use only with the cart, stand, tripod,  bracket, or table specified by the 
manufacturer, or sold with the 
apparatus. When a cart is used, 
use caution when moving the cart / 
apparatus combination to avoid injury 
from tip-over.
13) Unplug this apparatus during lightning  storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing  is required when the apparatus has been damaged in any 
way, such as power-supply cord or plug is damaged, liquid 
has been spilled or objects have fallen into the apparatus, 
the apparatus has been exposed to rain or moisture, does 
not operate normally, or has been dropped.
15) To prevent electric shock, ensure the grounding pin on the  AC cord power plug is securely connected.
The lightning flash with 
arrowhead within a triangle 
is intended to tell the user 
that parts inside the product 
are a risk of electric shock to 
persons.
The exclamation point within 
a triangle is intended to 
tell the user that important 
operating and servicing 
instructions are in the papers 
with the appliance.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatu\
s to rain or moisture. Do not place liquid containers (flower vase, cups, cosmetics, etc.) ab\
ove the set
(including on shelves above, etc.).
Important Safety Instructions

WARNING/CAUTION
This causes the image to remain on the plasma screen
(“Image retention”). This is not considered a malfunction and is
not covered by the warranty.
Typical still images
To prevent “Image retention”, 
the screen saver is 
automatically activated after 
a few minutes if no signals 
are sent or no operations are 
performed. (p. 49)■ Do not display a still picture for a long time

 Do not place the unit where it’s exposed to sunlight or other 
bright light (including reflections).

 Use of some types of fluorescent lighting may reduce the 
remote control’s transmission range.
■ Setup
Notes
SMALL PARTS CAN PRESENT CHOKING HAZARD IF 
ACCIDENTALLY SWALLOWED.
KEEP SMALL PARTS AWAY FROM YOUNG CHILDREN.
DISCARD UNNEEDED SMALL PARTS AND OTHER OBJECTS, 
INCLUDING PACKAGING MATERIALS AND PLASTIC BAGS/SHEETS 
TO PREVENT THEM FROM BEING PLAYED WITH BY YOUNG 
CHILDREN, CREATING THE POTENTIAL RISK OF SUFFOCATION.
■ Set upDo not place the Plasma TV on sloped or unstable surfaces.

 The Plasma TV may fall off or tip over.
Do not place any objects on top of the Plasma TV.

 If water spills onto the Plasma TV or foreign objects get 
inside it, a short-circuit may occur which could result in fire 
or electric shock. If any foreign objects get inside the Plasma 
TV, please consult an Authorized Service Center.
This Plasma TV is for use only with the following optional 
accessories. Use with any other type of optional accessories may 
cause instability which could result in the possibility of injury.
(All of the following accessories are manufactured by 
Matsushita Electric Industrial Co., Ltd.) •  Wall-hanging bracket (Vertical)  TY-WK42PV3U
•  Wall-hanging bracket (Angled)  TY-WK42PR2U
      TY-WK42PR3U
Always be sure to ask a qualified technician to carry out set-up.

 Two or more people are required to install and remove the 
television. If two people are not present, the television may 
be dropped, and personal injury may result.
Transport only in upright position!

 Transporting the unit with its display panel facing upright or 
downward may cause damage to the internal circuitry.
■ AC Power Supply CordThe Plasma TV is designed to operate on 120 V AC, 60 Hz. 
Securely insert the power cord plug as far as it will go.

 If the plug is not fully inserted, heat may be generated which 
could cause fire. If the plug is damaged or the wall socket 
plate is loose, they should not be used.
The included power cord is for use with this unit only.
Do not use any power cord other than that provided with this TV.

 Doing so may cause fire or electric shocks.
Do not handle the power cord plug with wet hands.

 Doing so may cause electric shocks.Do not do anything that might damage the power cable. When 
disconnecting the power cable, hold the plug, not the cable.

 Do not make any modifications to, place heavy objects on, 
place near hot objects, heat, bend, twist or forcefully pull the 
power cable. Doing so may cause damage to the power cable 
which can cause fire or electric shock. If damage to the cable 
is suspected, have it repaired at an Authorized Service Center.
■  If problems occur during useIf a problem occurs (such as no picture or no sound), or if 
smoke or an abnormal odor is detected from the Plasma 
TV, unplug the power cord immediately.

 Continued use of the TV under these conditions might cause 
fire or permanent damage to the unit. Have the TV evaluated 
at an Authorized Service Center. Servicing of the TV by any 
unauthorized personnel is strongly discouraged due to its 
high voltage dangerous nature.
If water or foreign objects get inside the Plasma TV, if the 
Plasma TV is dropped, or if the cabinet becomes damaged, 
disconnect the power cord plug immediately.

 A short may occur, which could cause fire. Contact an 
Authorized Service Center for any repairs that need to be 
made.
Do not cover the ventilation holes.

 Doing so may cause the Plasma TV to overheat, which can 
cause fire or damage to the Plasma TV.
If using the pedestal, leave a space of 3 15/16” (10 cm) or 
more at the top, left and right, 2 3/8” (6 cm) or more at the 
bottom, and 2 3/4” (7 cm) or more at the rear.
■  When using the Plasma TVBe sure to disconnect all cables before moving the Plasma 
TV.

 Moving the TV with its cables attached might damage the 
cables which, in turn, can cause fire or electric shock.
Disconnect the power plug from the wall outlet as a safety 
precaution before carrying out any cleaning.

 Electric shocks can result if this is not done.
Clean the power cable regularly to prevent it from 
becoming dusty.

 Built-up dust on the power cord plug can increase humidity 
which might damage the insulation and cause fire. Unplug the 
cord from the wall outlet and clean it with a dry cloth.
This Plasma TV radiates infrared rays; therefore, it may 
affect other infrared communication equipment.
Install your infrared sensor in a place away from direct or 
reflected light from your Plasma TV.
Do not climb up onto the television or use it as a step. 
(Young children should be made particularly aware of this 
caution.)

 If the unit falls over or becomes damaged through misuse, 
injury may result.
The TV will still consume some power as long as the power 
cord is inserted into the wall outlet.

 Channel number and other logos

 Image displayed in 4:3 mode

 SD Card photo
 Video game
 Computer image
 
 WARNING
 

 CAUTION
CANADIAN NOTICE:
For Model TH-42PX75U, TH-50PX75U
This Class B digital apparatus complies with Canadian ICES-003. This equipment has been tested and found to comply with the limits for a\
n Other Class B digital device, pursuant to Part 15 of  the 
FCC Rules. These limits are designed to provide reasonable protection against harmf\
ul interference in a residential installatio n. 
This equipment generates, uses and can radiate radio frequency energy an\
d, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. Ho\
wever, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does cause harmful\
 interference to radio or television reception, which c an be 
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by o\
ne or more of the  
following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the Panasonic Service Center or an experienced radio/TV tec\
hnician for help.
FCC STATEMENT
FCC Caution:
To assure continued compliance, use only shielded interface cables when c\
onnecting TV to peripheral devices.
Any changes or modifications not expressly approved by responsible party\
 may cause harmful interference and could 
void the user’s authority to operate this device.
Responsible Party: Panasonic Corporation of North AmericaOne Panasonic Way, Secaucus, NJ 07094
Contact Source: Panasonic Consumer Electronics Company 1-888-VIEW-PTV (843-9788)
email: [email protected] 
						

							
4
5

WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service p\
ersonnel.

4 : 3 
12

CAUTION
RISK OF ELECTRIC SHOCKDO NOT OPEN

Safety Precautions
1)  Read these instructions.
2)  Keep these instructions.
3)  Heed all warnings.
4)  Follow all instructions.
5)  Do not use this apparatus near water.
6)  Clean only with dry cloth.
7)  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8)  Do not install near any heat sources such as radiators, heat  registers, stoves, or other apparatus (including amplifiers) 
that produce heat.
9)  Do not defeat the safety purpose of the polarized or  grounding-type plug. A polarized plug has two blades with 
one wider than the other. A grounding type plug has two 
blades and a third grounding prong. The wide blade or the 
third prong are provided for your safety. If the provided 
plug does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched  particularly at plugs, convenience receptacles, and the 
point where they exit from the apparatus. 11) Only use attachments / accessories specified by the 
manufacturer.
12) Use only with the cart, stand, tripod,  bracket, or table specified by the 
manufacturer, or sold with the 
apparatus. When a cart is used, 
use caution when moving the cart / 
apparatus combination to avoid injury 
from tip-over.
13) Unplug this apparatus during lightning  storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing  is required when the apparatus has been damaged in any 
way, such as power-supply cord or plug is damaged, liquid 
has been spilled or objects have fallen into the apparatus, 
the apparatus has been exposed to rain or moisture, does 
not operate normally, or has been dropped.
15) To prevent electric shock, ensure the grounding pin on the  AC cord power plug is securely connected.
The lightning flash with 
arrowhead within a triangle 
is intended to tell the user 
that parts inside the product 
are a risk of electric shock to 
persons.
The exclamation point within 
a triangle is intended to 
tell the user that important 
operating and servicing 
instructions are in the papers 
with the appliance.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatu\
s to rain or moisture. Do not place liquid containers (flower vase, cups, cosmetics, etc.) ab\
ove the set
(including on shelves above, etc.).
Important Safety Instructions

WARNING/CAUTION
This causes the image to remain on the plasma screen
(“Image retention”). This is not considered a malfunction and is
not covered by the warranty.
Typical still images
To prevent “Image retention”, 
the screen saver is 
automatically activated after 
a few minutes if no signals 
are sent or no operations are 
performed. (p. 49)■ Do not display a still picture for a long time

 Do not place the unit where it’s exposed to sunlight or other 
bright light (including reflections).

 Use of some types of fluorescent lighting may reduce the 
remote control’s transmission range.
■ Setup
Notes
SMALL PARTS CAN PRESENT CHOKING HAZARD IF 
ACCIDENTALLY SWALLOWED.
KEEP SMALL PARTS AWAY FROM YOUNG CHILDREN.
DISCARD UNNEEDED SMALL PARTS AND OTHER OBJECTS, 
INCLUDING PACKAGING MATERIALS AND PLASTIC BAGS/SHEETS 
TO PREVENT THEM FROM BEING PLAYED WITH BY YOUNG 
CHILDREN, CREATING THE POTENTIAL RISK OF SUFFOCATION.
■ Set upDo not place the Plasma TV on sloped or unstable surfaces.

 The Plasma TV may fall off or tip over.
Do not place any objects on top of the Plasma TV.

 If water spills onto the Plasma TV or foreign objects get 
inside it, a short-circuit may occur which could result in fire 
or electric shock. If any foreign objects get inside the Plasma 
TV, please consult an Authorized Service Center.
This Plasma TV is for use only with the following optional 
accessories. Use with any other type of optional accessories may 
cause instability which could result in the possibility of injury.
(All of the following accessories are manufactured by 
Matsushita Electric Industrial Co., Ltd.) •  Wall-hanging bracket (Vertical)  TY-WK42PV3U
•  Wall-hanging bracket (Angled)  TY-WK42PR2U
      TY-WK42PR3U
Always be sure to ask a qualified technician to carry out set-up.

 Two or more people are required to install and remove the 
television. If two people are not present, the television may 
be dropped, and personal injury may result.
Transport only in upright position!

 Transporting the unit with its display panel facing upright or 
downward may cause damage to the internal circuitry.
■ AC Power Supply CordThe Plasma TV is designed to operate on 120 V AC, 60 Hz. 
Securely insert the power cord plug as far as it will go.

 If the plug is not fully inserted, heat may be generated which 
could cause fire. If the plug is damaged or the wall socket 
plate is loose, they should not be used.
The included power cord is for use with this unit only.
Do not use any power cord other than that provided with this TV.

 Doing so may cause fire or electric shocks.
Do not handle the power cord plug with wet hands.

 Doing so may cause electric shocks.Do not do anything that might damage the power cable. When 
disconnecting the power cable, hold the plug, not the cable.

 Do not make any modifications to, place heavy objects on, 
place near hot objects, heat, bend, twist or forcefully pull the 
power cable. Doing so may cause damage to the power cable 
which can cause fire or electric shock. If damage to the cable 
is suspected, have it repaired at an Authorized Service Center.
■  If problems occur during useIf a problem occurs (such as no picture or no sound), or if 
smoke or an abnormal odor is detected from the Plasma 
TV, unplug the power cord immediately.

 Continued use of the TV under these conditions might cause 
fire or permanent damage to the unit. Have the TV evaluated 
at an Authorized Service Center. Servicing of the TV by any 
unauthorized personnel is strongly discouraged due to its 
high voltage dangerous nature.
If water or foreign objects get inside the Plasma TV, if the 
Plasma TV is dropped, or if the cabinet becomes damaged, 
disconnect the power cord plug immediately.

 A short may occur, which could cause fire. Contact an 
Authorized Service Center for any repairs that need to be 
made.
Do not cover the ventilation holes.

 Doing so may cause the Plasma TV to overheat, which can 
cause fire or damage to the Plasma TV.
If using the pedestal, leave a space of 3 15/16” (10 cm) or 
more at the top, left and right, 2 3/8” (6 cm) or more at the 
bottom, and 2 3/4” (7 cm) or more at the rear.
■  When using the Plasma TVBe sure to disconnect all cables before moving the Plasma 
TV.

 Moving the TV with its cables attached might damage the 
cables which, in turn, can cause fire or electric shock.
Disconnect the power plug from the wall outlet as a safety 
precaution before carrying out any cleaning.

 Electric shocks can result if this is not done.
Clean the power cable regularly to prevent it from 
becoming dusty.

 Built-up dust on the power cord plug can increase humidity 
which might damage the insulation and cause fire. Unplug the 
cord from the wall outlet and clean it with a dry cloth.
This Plasma TV radiates infrared rays; therefore, it may 
affect other infrared communication equipment.
Install your infrared sensor in a place away from direct or 
reflected light from your Plasma TV.
Do not climb up onto the television or use it as a step. 
(Young children should be made particularly aware of this 
caution.)

 If the unit falls over or becomes damaged through misuse, 
injury may result.
The TV will still consume some power as long as the power 
cord is inserted into the wall outlet.

 Channel number and other logos

 Image displayed in 4:3 mode

 SD Card photo
 Video game
 Computer image
 
 WARNING
 

 CAUTION
CANADIAN NOTICE:
For Model TH-42PX75U, TH-50PX75U
This Class B digital apparatus complies with Canadian ICES-003. This equipment has been tested and found to comply with the limits for a\
n Other Class B digital device, pursuant to Part 15 of  the 
FCC Rules. These limits are designed to provide reasonable protection against harmf\
ul interference in a residential installatio n. 
This equipment generates, uses and can radiate radio frequency energy an\
d, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. Ho\
wever, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does cause harmful\
 interference to radio or television reception, which c an be 
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by o\
ne or more of the  
following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the Panasonic Service Center or an experienced radio/TV tec\
hnician for help.
FCC STATEMENT
FCC Caution:
To assure continued compliance, use only shielded interface cables when c\
onnecting TV to peripheral devices.
Any changes or modifications not expressly approved by responsible party\
 may cause harmful interference and could 
void the user’s authority to operate this device.
Responsible Party: Panasonic Corporation of North AmericaOne Panasonic Way, Secaucus, NJ 07094
Contact Source: Panasonic Consumer Electronics Company 1-888-VIEW-PTV (843-9788)
email: [email protected] 
						

							
6
7
Quick Start Guide

 Accessories/Optional Accessory

A

a

b

B
Accessories/Optional Accessory
1
Open
Hook
2Note the correct polarity
(+ or -). CloseCaution
• Incorrect installation may cause battery 
leakage and corrosion, resulting in 
damage to the remote control.
• Do not mix old and new batteries.
• Do not mix different battery types (such as 
alkaline and manganese batteries).
• Do not use rechargeable (Ni-Cd) batteries.
• Do not burn or break batteries.
Wall-hanging bracket
Accessories
(angle)
• TY-WK42PR2U
• TY-WK42PR3U
Caution
Do not use any television or displays other than those given in this Ope\
rating Instructions.
• Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
• If you use the pedestal while it is physically damaged, personal injury \
may result. Contact your nearest Panasonic 
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
• If sufficient care is not taken to ensure screws are properly tightened during\
 assembly, the pedestal will not be strong enough  to 
support the TV, and it might fall over and become damaged, and personal injury may res\
ult.
Use the accessory fall-prevention brackets to secure the TV.
• If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal 
injury may result.
Warning
Do not disassemble or modify the pedestal.
• Otherwise the TV may fall over and become damaged, and personal injury may result.
Check you have all the items shown.
 Base (1) M5 x 16
M5 x 30
Pole (2)
Remote Control
Transmitter
•N2QAYB000103
Cable clamper (2)
Batteries for the
Remote Control
Transmitter 
(2)
•AA Battery
AC cord Antenna Adapter
•F-Type for 5C-2V
Pedestal
•TBL2AX00161
   
(TH-42PX75U)
•TBL2AX00171
   
(TH-50PX75U)
Product Registration Card (U.S.A.)
Customer Care Plan Card (U.S.A.)
How to assemble (p.7)
Note
• In order to maintain the TV’s performance and 
safety, be absolutely sure to ask your dealer or 
a licensed contractor to secure the wall-hanging 
brackets.
• Carefully read the instructions accompanying the 
plasma TV stand or pedestal, and be absolutely 
sure to take steps to prevent the TV from tipping 
over.
• Handle the TV carefully during installation since 
subjecting it to impact or other forces may cause 
its paneling to crack.
(vertical)
• TY-WK42PV3U
• Fix securely with assembly screws B. 
(Total 4 screws)
B
Assembly screw 
(4 of each)
A
Fix 
with 
A
Optional Accessory
Installing remote’s batteries
Attaching the pedestal to TV
Accessories
Operating Instructions
ab
Pole
Front
Pole
(
)
Pole
(
)
PoleFront
Align the stamped 
marks.Align the stamped 
marks.
■Set-up
LabelRear side
Arrow mark
Pole Hole for pedestal 
installation 
• Carry out work on a horizontal and level surface.
■Assembling the pedestal
• Fix securely with assembly 
screws 
A. (Total 4 screws)
Pole
 Base 
Bottom view
Quick Setup Guide 
(For viewing HD programming) 
						

							
6
7
Quick Start Guide

 Accessories/Optional Accessory

A

a

b

B
Accessories/Optional Accessory
1
Open
Hook
2Note the correct polarity
(+ or -). CloseCaution
• Incorrect installation may cause battery 
leakage and corrosion, resulting in 
damage to the remote control.
• Do not mix old and new batteries.
• Do not mix different battery types (such as 
alkaline and manganese batteries).
• Do not use rechargeable (Ni-Cd) batteries.
• Do not burn or break batteries.
Wall-hanging bracket
Accessories
(angle)
• TY-WK42PR2U
• TY-WK42PR3U
Caution
Do not use any television or displays other than those given in this Ope\
rating Instructions.
• Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
• If you use the pedestal while it is physically damaged, personal injury \
may result. Contact your nearest Panasonic 
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
• If sufficient care is not taken to ensure screws are properly tightened during\
 assembly, the pedestal will not be strong enough  to 
support the TV, and it might fall over and become damaged, and personal injury may res\
ult.
Use the accessory fall-prevention brackets to secure the TV.
• If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal 
injury may result.
Warning
Do not disassemble or modify the pedestal.
• Otherwise the TV may fall over and become damaged, and personal injury may result.
Check you have all the items shown.
 Base (1) M5 x 16
M5 x 30
Pole (2)
Remote Control
Transmitter
•N2QAYB000103
Cable clamper (2)
Batteries for the
Remote Control
Transmitter 
(2)
•AA Battery
AC cord Antenna Adapter
•F-Type for 5C-2V
Pedestal
•TBL2AX00161
   
(TH-42PX75U)
•TBL2AX00171
   
(TH-50PX75U)
Product Registration Card (U.S.A.)
Customer Care Plan Card (U.S.A.)
How to assemble (p.7)
Note
• In order to maintain the TV’s performance and 
safety, be absolutely sure to ask your dealer or 
a licensed contractor to secure the wall-hanging 
brackets.
• Carefully read the instructions accompanying the 
plasma TV stand or pedestal, and be absolutely 
sure to take steps to prevent the TV from tipping 
over.
• Handle the TV carefully during installation since 
subjecting it to impact or other forces may cause 
its paneling to crack.
(vertical)
• TY-WK42PV3U
• Fix securely with assembly screws B. 
(Total 4 screws)
B
Assembly screw 
(4 of each)
A
Fix 
with 
A
Optional Accessory
Installing remote’s batteries
Attaching the pedestal to TV
Accessories
Operating Instructions
ab
Pole
Front
Pole
(
)
Pole
(
)
PoleFront
Align the stamped 
marks.Align the stamped 
marks.
■Set-up
LabelRear side
Arrow mark
Pole Hole for pedestal 
installation 
• Carry out work on a horizontal and level surface.
■Assembling the pedestal
• Fix securely with assembly 
screws 
A. (Total 4 screws)
Pole
 Base 
Bottom view
Quick Setup Guide 
(For viewing HD programming) 
						

							
8
9
Quick Start Guide

 To Prevent TV from falling over

• Fix pedestal and base together with band.• Fix to wall or post with strong commercial wire or chain.
Main screw Remove screw
Securing to a base
To Prevent TV from falling over
Securing to a wall
• The TV must be fastened to both a base and a wall.

 Band (2)
 Screw (2)
  
Wood screw 
(2)
Accessories
•   Nominal diameter
4mm x 10 (for 42’) 
4mm x 12 (for 50’) 
Main screw
Clamp (2)
Accessories 
						

							
8
9
Quick Start Guide

 To Prevent TV from falling over

• Fix pedestal and base together with band.• Fix to wall or post with strong commercial wire or chain.
Main screw Remove screw
Securing to a base
To Prevent TV from falling over
Securing to a wall
• The TV must be fastened to both a base and a wall.

 Band (2)
 Screw (2)
  
Wood screw 
(2)
Accessories
•   Nominal diameter
4mm x 10 (for 42’) 
4mm x 12 (for 50’) 
Main screw
Clamp (2)
Accessories 
						

							
10
11
Quick Start Guide

 Basic Connection (Antenna + TV)
 Before  Connection

To connect antenna terminals

Reference of connection
ANT OUTANT IN
VIDEO
VIDEO
S VIDEO
PRPBY
P
RPBY
ANTENNACable In
HDMI 2AUDIO INAV IN  1AV IN  2
RLHDMI 1AUDIO INDIGITALAUDIO OUT
ANTENNACable In
Before Connection
■Antenna terminal■Pin terminals■HDMI terminal
• Firmly tighten by hand.• Match colors of plugs and terminals.
• Insert firmly.• Insert firmly.
Connected Equipment Introduction (Signal source)
Basic Connection
Connecting Antenna (To watch TV)Example 1
VHF/UHF Antenna Cable Box/ Cable
or
(If no Cable Box) 
■ Recording/playing back with DVD recorder or VCR
• DVD Recorder
This source has higher resolution through interlace or progressive signa\
l. 
Connection can be done with the use of Component Video or HDMI cable.
• VCRConnection can be done with the use of an RF cable and Composite Video/S Video cable.
■Watching Satellite
• You can enjoy high-definition programming by subscribing to 
high-definition satellite source. Connection can be done with the use of\
 
HDMI or Component Video cable.
• If using Cable Box
•Set the TV channel to CH3 or CH4. Power Cord
(Connect after all the 
other connections.)
Cable TV
VHF/UHF Antenna
TV
Back of the TV
Cable TV
AC 120 V
60Hz VHF/UHF Antenna
Cable Box
Antenna 
terminal
Satellite
Receiver
Satellite Antenna
green
blue
red
green
Note
•When disconnecting the power cord, be absolutely sure to disconnect the \
power cord plug at the wall outlet first.
• For additional assistance, visit us at:    www.panasonic.com
www.panasonic.ca
Note
• If your Panasonic DVD Recorder is compatible with EZ Sync (HDAVI control 2), you can operate your Panasonic  
  DVD Recorder with this TV’s remote control (p. 25 EZ SyncTM).
•   All cables and external equipment shown in this book are not supplied wi\
th the TV.
•  For the details of the external equipment’s connections, please refer to the operating manuals of the equipment.
■  Enjoying Home theater and DVD recorder with 
HDMI connection
• Home theater and DVD Recorder
  HDMI connection enables you to enjoy higher quality audio and video with\
  a single cable. DVD Recorder
Home Theater DVD Recorder
■Watching TV
• VHF/UHF Antenna
•NTSC (National Television System Committee):
  Conventional broadcasting
•ATSC (Advanced Television Systems Committee):
    Digital TV Standards include digital high-definition television (HDTV), 
standard-definition television (SDTV), data broadcasting, multi-channe\
l 
surround-sound audio and interactive television.
• Cable Box/Cable
 
• You need to subscribe to a cable TV service to enjoy viewing their 
programming.
 • You can enjoy high-definition programming by subscribing to a high-defini\
tion cable box. The connection can be 
done with the use of HDMI or Component Video cable. 
VCR
or
 oror