Panasonic Hd Plasma Display Th 85pf12 Operating Instructions

							61
List of Aspect Modes
Aspect modePicture 
 Enlarged screen DescriptionAll Aspect: 
OnFactory setting
All Aspect: Off
16:9 FULL
The display of the pictures  fi lls the screen.
In the case of SD signals, pictures with a 4:3 aspect ratio are 
enlarged horizontally, and displayed. This mode is suited to 
displaying anamorphic pictures with a 16:9 aspect ratio.
14:9 –
Letterbox pictures with a 14:9 aspect ratio are enlarged 
vertically and horizontally so that their display  fi lls  the 
screen vertically and is slightly smaller than the screen 
horizontally. The top and bottom edges of the pictures are 
cut off. Side panels are displayed at the left and right edges 
of the screen.
Just JUST
Pictures with a 4:3 aspect ratio are enlarged horizontally 
so that the picture distortion is minimized. The display of 
the areas around the left and right edges of the screen is 
slightly elongated.
Just1
Just2 JUST
Pictures with a 4:3 aspect ratio are enlarged horizontally 
so that the picture distortion is minimized. The left and right 
edges of the pictures are cut off. The display of the areas 
around the left and right edges of the screen is slightly 
elongated.
4:3 4:3
Pictures with a 4:3 aspect ratio are displayed with their 
original aspect ratio. Side panels are displayed at the left 
and right edges of the screen.
4:3 (1)
4:3 (2) 4:3
Pictures with a 4:3 aspect ratio are displayed with their 
original aspect ratio. The left and right edges of the pictures 
are masked by side panels.
4:3 Full H-FILL
Pictures with a 4:3 aspect ratio are enlarged horizontally so 
that their display fi  lls the screen. The left and right edges of 
the pictures are cut off.
Zoom ZOOM
Letterbox pictures with a 16:9 aspect ratio are enlarged 
vertically and horizontally so that their display  fi lls the screen. 
The top and bottom edges of the pictures are cut off.
Zoom1
Zoom2 ZOOM
Letterbox pictures with a 16:9 aspect ratio are enlarged 
vertically and horizontally so that their display  fi lls the screen. 
The top and bottom edges as well as the left and right edges 
of the pictures are cut off.
Zoom3 –
Letterbox pictures with a 2.35:1 aspect ratio are enlarged 
vertically and horizontally so that their display  fi lls the screen 
vertically and is slightly larger than the screen horizontally. 
The top and bottom edges as well as the left and right edges 
of the pictures are cut off. 
						

							62
Applicable Input Signals
*Mark: Applicable input signal
Signal nameHorizontal frequency 
(kHz)  Vertical frequency 
(Hz)  COMPONENT / RGB IN 
/ PC IN
(Dot clock (MHz)) DVI-D IN 
∗8
(Dot clock (MHz))
1   525  (480) / 60i  15.7359.94 *  (13.5)
2   525  (480) / 60p  31.4759.94 *  (27.0)   
∗5* (27.0)
3   625  (575) / 50i  15.6350.00 *  (13.5)
4   625  (575) / 50p  31.2550.00 *  (27.0)
5   625  (576) / 50p  31.2550.00 *  (27.0)
6   750  (720) / 60p  45.0060.00 *  (74.25) *  (74.25)
7   750  (720) / 50p  37.5050.00 *  (74.25) *  (74.25)
8   1,125  (1,080) / 60p  67.5060.00 *  (148.5) 
∗1* (148.5)
9   1,125  (1,080) / 60i  33.7560.00 *  (74.25) 
∗1* (74.25)
10   1,125  (1,080) / 50p  56.2650.00 *  (148.5) 
∗1* (148.5)
11   1,125  (1,080) / 50i  28.1350.00 *  (74.25) 
∗1* (74.25)
12   1,125  (1,080) / 24sF  27.0048.00 *  (74.25) 
∗2
13   1,125  (1,080) / 30p  33.75 30.00 *  (74.25) 
∗1 * (74.25)
14   1,125  (1,080) / 25p  28.1325.00 *  (74.25) 
∗1* (74.25)
15   1,125  (1,080) / 24p  27.0024.00 *  (74.25) 
∗1* (74.25)
16   1,250  (1,080) / 50i  31.2550.00 *  (74.25) 
∗3
17   2,048 × 1,080 / 24sF 
∗7 27.00 48.00
18   2,048 × 1,080 / 24p 
∗7 27.00 24.00
19   640 × 400 @70 Hz 31.4670.07 *  (25.17)
20   640 × 480 @60 Hz  31.4759.94 *  (25.18) 
∗6* (25.18)
21   640 × 480 @72 Hz  37.8672.81 *  (31.5)
22   640 × 480 @75 Hz  37.5075.00 *  (31.5)
23   640 × 480 @85 Hz  43.2785.01 *  (36.0)
24   800 × 600 @56 Hz  35.1656.25 *  (36.0)
25   800 × 600 @60 Hz  37.8860.32 *  (40.0) *  (40.0)
26   800 × 600 @72 Hz  48.0872.19 *  (50.0)
27   800 × 600 @75 Hz  46.8875.00 *  (49.5)
28   800 × 600 @85 Hz  53.6785.06 *  (56.25)
29   852 × 480 @60 Hz  31.4759.94 *  (33.54) 
∗6*
 (34.24)
30   1,024 × 768 @50 Hz  39.55 50.00 *  (51.89)
31   1,024 × 768 @60 Hz  48.36 60.00 *  (65.0) *  (65.0)
32   1,024 × 768 @70 Hz  56.48 70.07 *  (75.0)
33   1,024 × 768 @75 Hz  60.02 75.03 *  (78.75)
34   1,024 × 768 @85 Hz  68.68 85.00 *  (94.5)
35   1,066 × 600 @60 Hz  37.64 59.94 *  (53.0) *  (53.0)
36   1,152 × 864 @60 Hz  53.70 60.00 *  (81.62)
37   1,152 × 864 @75 Hz  67.50 75.00 *  (108.0)
38   1,280 × 768 @60 Hz 47.70 60.00 *  (80.14)
39   1,280 × 960 @60 Hz  60.00 60.00 *  (108.0)
40   1,280 × 960 @85 Hz  85.94 85.00 *  (148.5)
41   1,280 × 1,024 @60 Hz  63.98 60.02 *  (108.0) *  (108.0)
42   1,280 × 1,024 @75 Hz  79.98 75.03 *  (135.0)
43   1,280 × 1,024 @85 Hz  91.15 85.02 *  (157.5)
44   1,366 × 768 @50 Hz  39.55 50.00 *  (69.92)
45   1,366 × 768 @60 Hz  48.36 60.00 *  (86.71) *  (87.44)
46   1,400 × 1,050 @60 Hz  65.22 60.00 *  (122.61)
47   1,600 × 1,200 @60 Hz  75.00 60.00 *  (162.0) *  (162.0)
48   1,600 × 1,200 @65 Hz  81.25 65.00 *  (175.5)
49   1,920 × 1,080 @60 Hz 67.50 60.00 *  (148.5) 
∗4 * (148.5)
50   1,920 × 1,200 @60 Hz 74.0459.95 *  (154.0)
51   Macintosh13”  (640 × 480)  35.00 66.67*  (30.24)
52   Macintosh16”  (832 × 624)  49.72 74.54*  (57.28)
53   Macintosh21”  (1,152 × 870)  68.68 75.06*  (100.0)
∗1: Based on SMPTE 274M standard.     ∗2: Based on SMPTE RP211 standard.
∗3: Based on SMPTE 295M standard.     ∗4: The input signal is recognized as 1,125 (1,080) / 60p.
∗5: When selected the RGB format and 525p signal input to the Mini D-sub 15P\
 terminal, it is recognized as VGA 60Hz signal.
∗6: When inputted VGA 60Hz format signal from the other than Mini D-sub 15P terminal, it is recognized as 525p signal.
∗7:  Based on SMPTE 292M and 372M standards. These signals can be received when the Dual Link HD-SDI Terminal Board 
(TY-FB11DHD) is installed.
∗8:  These signals can be received when the DVI-D Terminal Board (TY-FB11DD) is installed.
Note: Signals without above speci fi cation may not be displayed properly. 
						

							63
Applicable Input Signals
Signal formatVertical 
frequency (Hz)Horizontal 
frequency (kHz)Dot clock  (MHz) Number of 
active pixels Total number 
of pixels Number of 
active lines Total number 
of lines
1 VGA60 59.94 31.47 25.18 640 800 480 525
2 525/60p 59.94 31.47 27.00 720 858 480 525
3 625/50p 50.00 31.25 27.00 720 864 576 625
4 750/60p 60.00 45.00 74.25 1280 1650 720 750
5 750/50p 50.00 37.50 74.25 1280 1980 720 750
6 1125/60i 60.00 33.75 74.25 1920 2200 1080 1125
7 1125/50i 50.00 28.13 74.25 1920 2640 1080 1125
8 1125/60p
∗60.00 67.50 148.50  1920 2200 1080 1125
9 1125/50p
∗50.00 56.26 148.50  1920 2640 1080 1125
10 1125/24p
∗24.00 27.00 74.25 1920 2750 1080 1125
VIDEO input (HDMI)
∗
Not compatible with HDMI Terminal Board (TY-FB8HM).
Audio signal   Linear PCM : 48/44.1/32 kHz 
						

							64
Command list of Weekly Command Timer
No. CommandControl details
1 AAC:MENCLR ∗1Audio Menu (Clear)
2 AAC:MENDYN ∗1Audio Menu (Dynamic)
3 AAC:MENSTD ∗1Audio Menu (Standard)
4 AAC:SURMON Surround (ON)
5 AAC:SUROFF Surround (OFF)
6 AMT:0 Audio Mute (OFF)
7 AMT:1 Audio Mute (ON)
8 ASO:M Audio out when PIP mode (Main Picture) 
9 ASO:S Audio out when PIP mode (Sub Picture) 
10 AVL:00 Audio Volume (00) 11 AVL:10 Audio Volume (10)
12 AVL:20 Audio Volume (20)
13 AVL:30 Audio Volume (30)
14 AVL:40 Audio Volume (40)
15 AVL:50 Audio Volume (50)
16 AVL:60 Audio Volume (60)
17 DAM:FULL Aspect (FULL)
18 DAM:JUST Aspect (JUST)
19 DAM:NORM Aspect (4:3)
20 DAM:SELF Aspect (Panasonic Auto)
21 DAM:ZOOM Aspect (ZOOM)
22 DWA:OFF Dual Picture mode (OFF)
23 DWA:OVL1 Advanced PIP mode (1) (see page 19)
24 DWA:OVL2 Advanced PIP mode (2) (see page 19)
25 DWA:OVL3 Advanced PIP mode (3) (see page 19)
26 DWA:OVL4 Advanced PIP mode (4) (see page 19)
27 DWA:OVL5 Advanced PIP mode (5) (see page 19)
28 DWA:OVL6 Advanced PIP mode (6) (see page 19)
29 DWA:OVLOF Advanced PIP mode (OFF) (normal two screen display mode)
30 DWA:OVLON Advanced PIP mode (ON)
31 DWA:PIN0 The location of the sub picture (lower right)
32 DWA:PIN1 The location of the sub picture (lower left)
33 DWA:PIN2 The location of the sub picture (upper left)
34 DWA:PIN3 The location of the sub picture (upper right)
35 DWA:PIP Dual Picture mode (Picture in Picture)
36 DWA:POP Dual Picture mode (Picture out Picture)
37 DWA:SWP Swap main picture and sub picture when PIP mode
38 DWA:TWN Dual Picture mode (Picture and Picture)
39 IMS:PC1 Input select (PC1) (Main Picture when PIP mode)
40 IMS:SL1 Input select (SLOT1) (Main Picture when PIP mode)
41 IMS:SL1A Input select (SLOT1A) (Main Picture when PIP mode)
42 IMS:SL1B Input select (SLOT1B) (Main Picture when PIP mode)
43 IMS:SL2 Input select (SLOT2) (Main Picture when PIP mode)
44 IMS:SL2A Input select (SLOT2A) (Main Picture when PIP mode)
45 IMS:SL2B Input select (SLOT2B) (Main Picture when PIP mode)
46 IMS:SL3 Input select (SLOT3) (Main Picture when PIP mode)
47 ISS:PC1 Sub Picture Input Select (PC1)
48 ISS:SL1 Sub Picture Input Select (SLOT1)
49 ISS:SL1A Sub Picture Input Select (SLOT1A)
50 ISS:SL1B Sub Picture Input Select (SLOT1B)
51 ISS:SL2 Sub Picture Input Select (SLOT2)
52 ISS:SL2A Sub Picture Input Select (SLOT2A)
53 ISS:SL2B Sub Picture Input Select (SLOT2B)
54 ISS:SL3 Sub Picture Input Select (SLOT3)
55 OSP:SCR0 Screen Saver SCROLLING BAR ONLY (OFF)
56 OSP:SCR1 Screen Saver SCROLLING BAR ONLY (ON)
57 POF Power OFF
58 PON Power ON
59 SSC:FNC0 Screen Saver function (SCROLLING BAR ONLY)
60 SSC:FNC1 Screen Saver function (NEGATIVE IMAGE)
61 SSC:MOD0 Screen Saver (Mode (OFF))
62 SSC:MOD3 Screen Saver (Mode (ON))
63 VMT:0∗
2Picture Mute (OFF)
64 VMT:1∗2Picture Mute (ON)
∗1  
These commands are unavailable on this model.
∗2  Picture Mute cannot be unlocked by powering off/on with the remote control. Turn off and on again with the button 
on the unit or enter the command VMT:0 to unlock Picture Mute. 
						

							65
Specifi cations
TH-85PF12U
Power Source  120 V AC, 50/60 Hz
Power Consumption Power on 1250 W
Stand-by condition Save OFF 1.0 W, Save ON 0.5 W
Power off condition 0.2 W
Plasma Display panel Drive method : AC type 85-inch, 16:9 aspect ratio
Screen size 74.3” (1,889 mm) (W) × 41.8” (1,062 mm) (H) × 85.3”\
 (2,167 mm) (diagonal)
(No.of pixels) 2,073,600 (1,920 (W) × 1,080 (H))
[5,760 × 1,080 dots]
Operating condition Temperature 32 °F - 104 °F (0 °C - 40 °C)
Humidity 20 % - 80 %
Applicable signals Scanning format 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60\
p · 50p, 1125 (1080) / 60i · 60p · 50i · 50p 
· 24p · 25p · 30p · 24sF, 1250 (1080) / 50i 
PC signals VGA, SVGA, XGA, SXGA
 UXGA ···· (compressed)
Horizontal scanning frequency 15 - 110 kHz Vertical scanning frequency 48 - 120 Hz
Connection terminals HDMI A-B TYPE A Connector × 2
COMPONENT/RGB IN Y/G (BNC)
P
B/B (BNC), PR/R (BNC) 
AUDIO IN (RCA PIN JACK × 2) with sync 1.0 Vp-p (75 Ω)
0.7 Vp-p (75 Ω)
0.5 Vrms
PC IN (HIGH-DENSITY MINI D-SUB 15PIN)  
B/P
B/CB :
R/P
R/CR :
HD/VD:
AUDIO IN (M3 JACK)   Y or G with sync 1.0 Vp-p (75 Ω)
Y or G without sync 0.7 Vp-p (75 Ω)
0.7 Vp-p (75 Ω)
0.7 Vp-p (75 Ω)
1.0 - 5.0 Vp-p (high impedance)
0.5 Vrms
SERIAL EXTERNAL CONTROL TERMINAL (D-SUB 9PIN)  RS-232C COMPATIBLE
AUDIO OUT RCA PIN JACK × 2 (L / R)
OUTPUT LEVEL : VARIABLE (-
∞    ― 0 dB)  [INPUT 1 kHz / 0 dB, 10 k Ω Load]
Accessories Supplied
Remote Control TransmitterEUR7636070R
Batteries AA Size × 2
Fixing band TMME203 × 2
Clamper TMM15412-2 × 1
Dimensions (W × H × D) 79.4” (2,015 mm) × 47.1” (1,195 mm) × 3.9” (99 mm)
Mass (weight) apporox. 260.2 lbs
Note:
Design and speci
fi cations are subject to change without notice. Mass and dimensions shown \
are approximate. 
						

							Panasonic Professional Display Company
Unit of Panasonic Corporation of 
North America 
One Panasonic Way 1F-10
Secaucus, NJ  07094Panasonic Professional Flat Panel DisplayLimited Warranty
Models or Parts Part
Warranty Labor
Warranty
Professional Flat 
Panel Display
LIMITS AND  EXCLUSIONS
There are no express warranties except as listed above.
THE WARRANTOR SHALL NOT BE LIABLE FOR 
INCIDENTAL OR CONSEQUENTIAL DAMAGES 
(INCLUDING, WITHOUT LIMITION, DAMAGE 
TO DISCS) RESULTING FROM THE USE OF THIS 
PRODUCT, OR ARISING OUT OF ANY BREACH OF 
THE WARRANTY.  ALL EXPRESS AND IMPLIED  WARRANTIES, INCLUDING THE WARRANTIES 
OF MERCHANTABILITY AND FITNESS FOR 
PARTICULAR PURPOSE, ARE LIMITED TO THE 
APPLICABLE WARRANTY PERIOD SET FORTH 
ABOVE.
Some states do not allow the exclusion or limitation  of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may nor apply to you. This warranty gives you specific legal rights and you may 
other rights, which vary from state to state.
If you have a problem with this product that is not  handled to your satisfaction, then write the Consumer Affairs Department at the Company address indicated 
above.
Panasonic Professional Display Company. (referred to 
as “the Warrantor”) will repair this product and all 
included accessories with new or refurbished parts, 
free of charge in the USA or Puerto Rico, of the 
original purchase in the event of a defect in materials or 
workmanship as follows:
In the USA and Puerto Rico 
FOR SERVICE 
CALL TOLL FREE  1-800-973-4390
3 Years 3 Years
On-site or carry-in service in the  USA and Puerto Rico 
may be obtained during the warranty period by contacting 
Panasonic Professional Display Company Service toll free 
at 1-800-973-4390.
This warranty is extended only to the original purchaser 
and is non transferable. A purchase receipt or other 
proof of date of original purchase will be required before 
warranty service is rendered.
This warranty only covers failures due to defects in 
materials or workmanship, which occur during normal 
use. The warranty does not cover damage which occur 
in shipment, or failures which are caused by products 
not supplied by the warrantor, or failures which result 
from improper installation, set-up adjustments, improper  antenna, inadequate signal pickup, maladjustment of 
consumer controls, improper operation, power line surge, 
improper voltage supply, lighting damage, or service by 
anyone other than an authorized repair facility, or 
damage that is attributable to acts of God.
66
(for the U.S.A and Puerto Rico) 
						

							Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
LIMITED WARRANTY STATEMENT
Item
Video Tape
P2/SD Cards
Video Heads
D5 Video heads
Maintenance Items
Colour Camera CCD
Imaging Block
BT-H Series LCD Monitors
* DLP™ Projectors
* LCD Projectors above 2,500 ANSI Lumens
* LCD Projectors below 2,500 ANSI Lumens
Projector Lamps
103 inch Plasma displays
Hard Drive Disk Unit Parts
30 days — Replacement only 
(content not covered)
(Content not covered)
1 year or 2,000 hrs. (prorated) Whichever comes first
1 year or 1,000 hrs. 
Whichever comes first
90 days
2 years
2 years
3 years or 17,000 hrs. 
Whichever comes first
3 years or 2,500 hrs. 
Whichever comes first
3 years or 1,500 hrs. 
Whichever comes first
50% of the rated lamp life or 1 year. 
Whichever comes first
3 year (burn-in not covered)
1 year plus balance (if any) of
the original Manufacturer’s
Limited Warranty. 
(Content not covered) Labour
N/A
N/A
1 year or 2,000 hrs. 
Whichever comes first
1 year or 1,000 hrs. 
Whichever comes first
90 days
1 year
1 year
3 years or 17,000 hrs. 
Whichever comes first
3 years or 2,500 hrs. 
Whichever comes first.
3 years or 1,500 hrs. 
Whichever comes first
50% of the rated lamp life or 1 year. 
Whichever comes first.
3 year 
1 year
WARRANTY COVERAGE PERIOD EXCEPTIONS
Panasonic Canada Inc. (also known as PCI) warrants this product to be \
free of 
defects in material and workmanship under normal use during the applicab\
le 
warranty coverage period described below. PCI agrees to repair, or at it\
s option, 
exchange, any part that becomes defective. However, the product must be \
purchased and serviced in Canada. The product or part that shows evidenc\
e of 
defect must be delivered prepaid or carried in to an authorized Panasoni\
c Broadcast 
Service Center. This warranty does not cover shipping costs. 
The warranty coverage period is one year for both parts and labour begin\
ning with 
the date of original end user purchase, subject to the exceptions as sta\
ted below. 
Repaired or replacement parts supplied during the warranty coverage peri\
od carry 
the unexpired portion of the original warranty coverage period. Proof of\
 product 
purchase is a condition of warranty service. The owner must produce the \
product 
purchase receipt or other satisfactory evidence of date of original purc\
hase.
 
This warranty does not apply to external appearance items, such as handl\
es, knobs, 
safety windows, etc. This warranty does not apply to any part, or parts,\
 of the 
product, installed, altered, repaired or misused in any way that, in the\
 opinion of PCI, 
affects the reliability of or detracts from the performance of the produ\
ct. 
For products requiring routine preventive maintenance, that maintenance \
must be 
performed in order to maintain warranty coverage. 
Serial numbers that have been altered, defaced or removed void this warr\
anty. This 
warranty does not cover replacements or repairs necessitated by loss or \
damage 
resulting from any cause beyond the control of PCI. 
Marking or retained images (sometimes called “burn-in”) resultin\
g from the display of 
fixed images on video display products are not defects and are not cover\
ed under 
this warranty.
In certain instances, some jurisdictions do not allow the exclusion or l\
imitation of 
incidental or consequential damages, or the exclusion of implied warrant\
ies, so the 
above limitations and exclusions may not be applicable. Warranty Service
If the product needs to be shipped for service, carefully pack (prefera\
bly in the 
original carton) and enclose a letter, detailing the complaint. Send pr\
epaid and 
adequately insured to the local authorized Panasonic Service Centre in y\
our 
area or to Panasonic Technical Support and Product Services Department, \
5770 
Ambler Drive, Mississauga, Ontario, L4W 2T3. Shipping to the latter loca\
tion 
requires a return authorization before shipment. No liability is assumed\
 for loss 
or damage to the product while in transit.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER 
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR 
ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES.
 Dust, smoke, rental/staging environment and twenty-four/seven operation,\
 
dramatically decreases the interval between performances of routine prev\
entive 
maintenance required to maintain this warranty coverage.
67
(for Canada) 
						

							68 
						

							69
Memo 
						

							70
Memo