Panasonic Hd Plasma Display Th 61phw6 Operating Instructions

							High Definition Plasma Display
Operating Instructions
TH-61PHW6
Model No.
R - STANDBY
G   POWER ONINPUT—   VOL      +
PLASMA DISPLAY
English
TQBC0644
®
Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual
for future reference.
For assistance in the USA, please call : 1-888-VIEW-PTV(843-9788)
or e-mail us at : [email protected]
          or visit us at www.panasonic.com                             (U.S.A.) 
						

							2
WARNING: 1) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to
qualified service personnel.
2) Do not remove the grounding pin on the power plug. This apparatus is equipped with a three pin
grounding-type power plug. This plug will only fit a grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact an electrician.
Do not defeat the purpose of the grounding plug.
The lightning flash with
arrow-head within a triangle
is intended to tell the user
that parts inside the product
constitute a risk of electric
shock to persons.The exclamation point within
a triangle is intended to tell
the user that important
operating and servicing
instructions are in the papers
with the appliance.
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain
or moisture.
Do not place containers with water (flower vase, cups, cosmetics, etc.) above the set. (including
on shelves above, etc.) 
						

							3
Important Safety Instructions
  1) Read these instructions.
All the safety and operating instructions should be read before the appliance is operated.
  2) Keep these instructions.
The safety and operating instructions should be retained for future reference.
  3) Heed all warnings.
All warnings on the appliance and in the operating instructions should be adhered to.
  4) Follow all instructions.
All operating and use instructions should be followed.
  5) Do not use this apparatus near water.
For example, near a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and
the like.
  6) Clean only with dry cloth.
Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.
  7) Do not block any ventilation openings. Install in accordance with the manufacturer ’s instructions.
Slots and Openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to
protect it from overheating. The openings should never be blocked by placing the product on a bed, sofa, rug, or other
similar surface.
  8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided or the manufacturer’s instructions have been adhered to.
  9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments / accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid
injury from tip-over.
Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination
to overturn.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
This will prevent damage to the product due to lightning and power-line surges.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15) To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected.
16) Do not overload wall outlets or extension cords as this can result in fire or electrical shock. 
						

							4
Table of Contents
Important Safety Instructions ...................................... 3
FCC STATEMENT .......................................................... 5
Safety Precautions ........................................................ 6
Accessories ................................................................... 8
Accessories Supplied ................................................... 8
Optional Accessories ................................................... 8
Remote Control Batteries ............................................. 9
Basic Controls ............................................................. 10
Connections / Cable fixing band ............................... 11
Speakers connection ................................................. 12
AV Input Terminals connection ................................... 12
AV Input connection ................................................... 13
COMPONENT / RGB Input connection ..................... 13
PC Input Terminals connection .................................. 15
SERIAL Terminals connection .................................... 17
Power ON/OFF and Input Signal Selection ............... 18
AC cord connection .................................................... 18
Power ON/OFF .......................................................... 18
Select the Input Signal ............................................... 19
Selecting the ON-Screen Menu Language ................ 19On-Screen Menu Display from Remote Control ....... 20
ADVANCED SETTINGS ............................................ 21
ASPECT Controls ........................................................ 23
Adjusting PICTURE POSITION/SIZE ......................... 25
SOUND Adjustment .................................................... 27
MUTE ......................................................................... 27
SURROUND Controls ................................................. 28
PICTURE Adjustments ................................................ 29
SCREENSAVER(For preventing after-images) ......... 31
NEGATIVE / SCROLL Selection ................................ 31
ON/OFF Selection ...................................................... 31
SIDE BAR ADJUST ................................................... 32
SET UP for Input Signals ............................................ 33
COMPONENT / RGB IN SELECT ............................. 33
3D Y/C FILTER – For NTSC Video images ............... 33
COLOR SYSTEM / Panasonic AUTO ........................ 34
SYNC ......................................................................... 35
H-FREQ. (kHz) / V-FREQ. (Hz) ................................. 35
Troubleshooting .......................................................... 36
Specifications .............................................................. 37
Dear Panasonic Customer
Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment
from your new High Definition Plasma Display.
To obtain maximum benefit from your set, please read these Instructions before making any adjustments,
and retain them for future reference.
Retain your purchase receipt also, and note down the model number and serial number of your set in
the space provided on the rear cover of these instructions.
For assistance in the USA, please call : 1-888-VIEW-PTV(843-9788)
or e-mail us at : [email protected]
          or visit us at www.panasonic.com                             (U.S.A.) 
						

							5
FCC STATEMENT
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC CAUTION:
To assure continued compliance, use only shielded interface cables when connecting to computer or
peripheral devices.
Any changes or modifications not expressly approved by Matsushita Electric Corporation of America could
cause harmful interference and would void the user’s authority to operate this device.
FCC Declaration of Conformity
Responsible Party: Matsushita Electric Corporation of America
One Panasonic Way, Secaucus, NJ 07094
Contact Source: Panasonic Consumer Electronics Company
1-888-843-9788
email: [email protected]
Note:
Do not allow a still picture to be displayed for an extended period, as this can cause a permanent after-
image to remain on the High Definition Plasma Display.
Examples of still pictures include logos, video games, computer images, teletext and images displayed in
4:3 mode.
Trademark Credits
 VGA is a trademark of International Business Machines Corporation.
 Macintosh is a registered trademark of Apple Computer, USA.
 S-VGA is a registered trademark of the Video Electronics Standard Association.
Even if no special notation has been made of company or product trademarks, these trademarks have been fully
respected. 
						

							6
Safety Precautions
WARNING
Set up
Do not place the Plasma Display on sloped or unstable surfaces.
 The Plasma Display may fall off or tip over.
Do not place any objects on top of the Plasma Display.
 If water spills onto the Plasma Display or foreign objects get inside it, a short-circuit may occur which could result in fire
or electric shock. If any foreign objects get inside the Plasma Display, please consult an Authorized Service Center.
Do not cover the ventilation holes.
 Doing so may cause the Plasma Display to overheat, which can cause fire or damage to the Plasma Display.
If using the optional pedestal (accessory), leave a space of 4” (102 mm) or more at the top, left and right,  and 1” (25
mm) or more at the rear.
Avoid installing this product near electronic equipment that is easy to receive electromagnetic waves.
 It may cause interference in image, sound, etc. In particular, keep video equipment away from this product.
AC Power Supply Cord
The Plasma Display is designed to operate on 120 V AC, 50/60 Hz.
Securely insert the power cord plug as far as it will go.
 If the plug is not fully inserted, heat may be generated which could cause fire. If the plug is damaged or the wall socket
plate is loose, they should not be used.
Do not handle the power cord plug with wet hands.
 Doing so may cause electric shocks.
Do not do anything that might damage the power cable. When disconnecting the power cable, hold the plug, not
the cable.
 Do not make any modifications, place heavy objects on, place near hot objects, heat, bend, twist or forcefully pull the
power cable. Doing so may cause damage to the power cable which can cause fire or electric shock. If damage to the
cable is suspected, have it repaired at an Authorized Service Center.
If the Plasma Display will not be used for a long period of time, unplug the power cord from the wall outlet.
If problems occur during use
If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from the Plasma
Display, unplug the power cord immediately.
 Continuous use of the Display under these conditions might cause fire or permanent damage to the unit. Contact an
Authorized Service center to have the Display evaluated. Services to the Display by any unauthorized personnel are
strongly discouraged due to its high voltage dangerous nature.
If water or foreign objects get inside the Plasma Display, if the Plasma Display is dropped, or if the cabinet
becomes damaged, disconnect the power cord plug immediately.
 A short may occur, which could cause fire. Contact an Authorized Service Center for any repairs that need to be made. 
						

							7
 CAUTION
This Plasma Display is for use only with the following optional accessories. Use with any other type of optional
accessories may cause instability which could result in the possibility of injury.
(All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.)
 Pedestal..........................................TY-ST61PHW6
 Wall-hanging bracket (Vertical).......TY-WK61PV1
Always be sure to ask a qualified technician to carry out set-up.
When using the Plasma Display
Do not bring your hands, face or objects close to the ventilation holes of the Plasma Display.
 The top of the Plasma Display is usually very hot due to the high temperature of exhaust air being released through the
ventilation holes. Burns or personal injuries can happen if any body parts are brought too close. Placing any object
near the top of the display could also result in heat damages to the object as well as to the Display if its ventilation
holes are blocked.
Be sure to disconnect all cables before moving the Plasma Display.
 Moving the Display with its cables attached might damage the cables which, in turn, can cause fire or electric shock.
Disconnect the power plug from the wall outlet as a safety precaution before carrying out any cleaning.
 Electric shocks can result if this is not done.
Clean the power cable regularly to prevent it from becoming dusty.
 Built-up dust on the power cord plug can increase humidity which might damage the insulation and cause fire. Unplug
the cord from the wall outlet and clean it with a dry cloth.
Cleaning and maintenance
The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning
cloth or a soft, lint-free cloth.
 If the surface is particularly dirty, soak a soft, lint-free cloth in a weak detergent solution and then wring the cloth to
remove excess liquid. Use this cloth to wipe the surface of the display panel, then wipe it evenly with a dry cloth, of the
same type, until the surface is dry.
 Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact with
volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the surface may be adversely
affected.
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
 If the cabinet is particularly dirty, soak the cloth in a weak detergent solution and then wring the cloth dry. Use this cloth
to wipe the cabinet, and then wipe it dry with a dry cloth.
 Do not allow any detergent to come into direct contact with the surface of the Plasma Display.
If water droplets get inside the unit, operating problems may result.
 Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the cabinet
surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact
with articles made from rubber or PVC.
Note:
Do not allow a still picture to be displayed for an extended period, as this can cause a permanent after-image to remain
on the Plasma Display.
Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode.
Safety Precautions 
						

							8
PLASMA DISPLAY
INPUT
SURROUND
VOL
NR
PICTURE
SOUNDSET UP
ASPECT PICTURE
POS. /SIZE
OFF TIMER
PC
Fixing bands
TMME203× 2
Accessories
Accessories Supplied
Check that you have the Accessories and items shown
Optional Accessories
 Pedestal
TY-ST61PHW6
Batteries for the Remote
Control Transmitter
(AA(R6) Battery × 2)
For assembling
Full instructions are supplied with each of the optional accessories for use with this Plasma Display.
AC cord Warranty
 Wall hanging bracket
 TY-WK61PV1 Remote Control
Transmitter
EUR646533
Operating
Instruction book 
						

							9
Remote Control Batteries
Requires two AA batteries.
1. Turn the transmitter face down.
Press and slide off the battery
cover.2. Install the batteries as shown in
the battery compartment.
(Polarity + or – must match the
markings in the compartment.)
Two AA size
Helpful Hint:
For frequent remote control users, replace old batteries with
Alkaline batteries for longer life.
 
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Observe the following precautions:
1. Batteries should always be replaced as a pair. Always use new batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).
4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
5. Battery replacement is necessary when the remote control acts sporadically or stops operating the Plasma Display.3. Replace the cover and slide in
reverse until the lock snaps. 
						

							10
Basic Controls
R - STANDBY
G   POWER ON
TH-61PHW6INPUT—   VOL      +
Main POWER ON/OFF SwitchVOLUME Adjustment
Press the Volume Up “+”
or Down “–” button to
increase or decrease the
sound volume level. INPUT button
(VIDEO(S VIDEO), COMPONENT/RGB,
PC Mode Selection)
Press
 the “INPUT” button to select VIDEO
(S VIDEO), COMPONENT/RGB, PC input
signal modes sequentially.
(see page 19) Power Indicator
The Power Indicator will light.
 POWER-OFF Indicator not illuminated
(The unit will still consume some power as
long as the power cord is inserted into the
wall outlet.)
 STAND-BY .....Red
 POWER-ON.....Green
                 OFF TIMER button
The Plasma Display can be preset to switch to stand-by after a fixed period. The
setting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes (off timer
cancelled) each time the button is pressed.
30 60
090
PC button
Press the “PC” mode selection
button to select the PC mode.
This button is used to switch
directly to PC mode.
INPUT
SURROUND
VOL
NR
PICTURE
SOUNDSET UP
ASPECT PICTURE
POS. /SIZE
OFF TIMER
PC
INPUT button
(VIDEO(S VIDEO), COMPONENT/
RGB, PC Mode Selection)
Press to select VIDEO(S VIDEO),
COMPONENT / RGB, PC input signal
modes sequentially. (see page 19)
Sound mute On/Off (see page 27)
VOLUME Adjustment
Press the Volume Up “+” or Down
“–” button to increase or decrease
the sound volume level.
ACTION button
Press to make selections
ASPECT button
Press to adjust the aspect.
(see page 23) SOUND button (see page 27) SET UP button (see page 33) POSITION buttons R button (see page 21) STAND-BY(ON/OFF) button
The Plasma Display must first be plugged into the wall
outlet and turned on at the power switch (see page 18).
Press this button to turn the Plasma Display ON, from STAND-
BY mode. Press it again to turn the High Definition Plasma
Display OFF to STAND-BY mode.SURROUND button
(see page 28)
N button
(see page 21, 26, 27, 29)
PICTURE button
(see page 29)
PICTURE POS./SIZE button
(see page 25)
STATUS button
Press the “STATUS” button to
display the current system status.
 1  VIDEO(S VIDEO), COMPONENT
/ RGB, PC mode
 2  ASPECT mode (see page 23)
 3  OFF TIMER
The off timer indicator is displayed
only when the off timer has been set.
OFF  TIMER 90
1
2
3VIDEONORMAL
When three minutes remain, “OFF TIMER 3” will flash.
The off timer is cancelled if a power interruption occurs.