Panasonic HD Plasma Display Th 42phd5 Operating Instructions

							21
On-Screen Menu Display from Remote Control
Note:
“SIGNAL” setup menu displays a different setting condition for each input signal. (see page 19)To SIGNAL screen for RGB
(see page 36) To SIGNAL screen for
VIDEO  (see page 34, 35)To SIGNAL screen for
COMPONENT (see page 35)
Press to access each adjust
screen.
R
Press the R button to return
to “SET UP” menu.
R
PRESENT TIME SETUP
PRESENT TIME OF DAY
HOURS ADJUSTMENT99 : 99
     00
MINUTES ADJUSTMENT     00
POWER ON SETUP
POWER ON TIME
HOUR ADJUSTMENT0 : 00
     00
MINUTES ADJUSTMENT     00
POWR OFF SETUP
POWER OFF TIME
HOURS ADJUSTMENT0 : 00
     00
MINUTES ADJUSTMENT     00
Press the R button to return
to “SET UP” menu.
SET UP TIMER
PRESENT TIME
POWER ON FUNCTION0:52
OFF
POWER ON TIMEPOWER OFF FUNCTIONPOWER OFF TIME
0:00
0:00OFF
3D  Y/C  FILTER  (
NTSC)
COLOR  SYSTEM
Panasonic  AUTO  (
4:3)ON
AUTO
NORMAL
3:2 PULLDOWNOFF
SIGNAL[ 
 VIDEO  ]SIGNAL[
  COMPONENT  ]
3:2 PULLDOWNOFF
SIGNAL[
  RGB  ]
SYNC
H
-FREQ.                 kHz
V-FREQ.                  HzH & V
31.5
60.0
SIGNAL[
  PC  ]
SYNC
H
-FREQ.                 kHz
V-FREQ.                  HzH & V
31.5
60.0
FINISH TIME
FINISH TIME0:00
MINUTES ADJUSTMENTHOURS ADJUSTMENT   00
   00
OPERATING TIME
SAVER DURATION0:00
MINUTES ADJUSTMENTHOURS ADJUSTMENT   00
   00
START TIME
START TIME0:00   00MINUTES ADJUSTMENT   00HOURS ADJUSTMENT
R
Press the R button to return
to “SCREENSAVER” menu. Press to select
each TIME adjust
screen.
Press to display each
adjust screen.
Press to select each TIMER
adjustment items.
When select TIMER adjustment
item, press this button to SET
UP TIMER screen.
To SET UP TIMER selection
screen.(see page 30)To SIGNAL screen for PC
(see page 36)
0:000:00
SCREENSAVER
FUNCTION
MODE
WHITE BAR SCROLLOFF
SIDE BAR ADJUSTHIGH
SHOW DURATION
SAVER DURATION
To setup SCREENSAVER
(See page 32)
PERIODIC TIME
SHOW DURATION0:00
MINUTES ADJUSTMENTHOURS ADJUSTMENT   00
   00 
						

							22
ASPECT Controls
The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema
format picture.
PLASMA DISPLAY
SURROUND
VOL
NR
PICTURE
SOUNDSET UP
PICTURE
POS. /SIZE
OFF TIMER
PC
INPUT
ASPECT
ASPECT button
The aspect mode changes each time the ASPECT button
is pressed.
NORMAL          ZOOM          FULL
Panasonic AUTO          JUST
ASPECT
Notes:
(1) During RGB and PC input signal modes, the mode switches between
“NORMAL”, “ZOOM” and “FULL” only.
(2) 
For a 1,125i (1,080i), 750p (720p) signal input during “COMPONENT”
input signal mode, the mode is set to “FULL” mode, and switching
is not possible.
For a 525i (480i), 625i (575i), 525p (480p) and 625p (575p) signal
input during “COMPONENT” input signal mode, “Panasonic AUTO”
cannot be selected.
(3) The aspect mode is memorized separately for each input terminal
(VIDEO (S VIDEO), COMPONENT, RGB and PC). 
						

							23
ASPECT Controls
Mode
NORMAL
ZOOM
FULL
JUST
Panasonic
AUTOExplanation
NORMAL will display a 4:3 picture at its standard 4:3
size.
ZOOM mode magnifies the central section of the picture.
FULL will display the picture at its maximum size but
with sight elongation.
JUST mode will display a 4:3 picture at its maximum
size but with aspect correction applied to the center of
the screen so that elongation is only apparent at the
left and right edges of the screen. The size of the picture
will depend on the original signal.
Notes:
(1) Do not allow the picture to be displayed in 4:3 mode for an extended period, as this can cause a parmanent after-image
to remain on the Plasma Display Panel.
(2) The S VIDEO terminal on this set can detect specially encoded signals that are compatible with a wide screen monitor.
When a full image from the S VIDEO terminal of specially encoded video is detected by the set, the screen size is
automatically set to FULL mode.
NORMAL
3 4
ZOOM4
316
9
FULL4
316
9
4
39 16
JUST
Picture
The display will automatically become enlarged
(depending on the picture source), allowing you to view
the picture at its maximum size.
Note:
Panasonic AUTO mode is designed to automatically
adjust the aspect ratio to handle a mix of 16:9 and 4:3
program material. Certain 4:3 program material, such
as stock market data screens, may occasionally cause
the image size to change unexpectedly. When viewing
such programs, it is recommended that the ASPECT
be set to NORMAL.Panasonic AUTO
For an elongated image
For a 4:3 imageImage is expanded
416
39
4
3
Changes in accordance
with the Panasonic
AUTO mode setting (see
page 35) 
						

							24
Adjusting PICTURE POSITION/SIZE
PLASMA DISPLAY
SURROUND
VOL
N
PICTURE
SOUNDSET UP
OFF TIMER
PC
INPUT
ASPECT
PICTURE
POS. /SIZE
R
Adjusting screen
PICTURE
POS. /SIZE
Press to display the PICTURE POS./
SIZE menu.
NORMAL
PICTURE  POS./SIZE
NORMALIZE
H-POS
H-SIZE
V-POS
V-SIZE
NORMAL
PICTURE  POS./SIZE
NORMALIZE
H-POS
H-SIZE
V-POS
V-SIZE
CLOCK  PHASE
Press to adjust POS./SIZE.
Notes:
(1) Adjustment details are memorized separately for different input signal formats (Adjustments for component signals
are memorized for 525i (480i), 625i (575i), 525p (480p), 1,125i (1,080i) and 625p (575p), 750p (720p) each, and
RGB/PC signals are memorized for each frequency.)
(2) If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This
picture position movement cannot be controlled by the PICTURE POS./SIZE function.
R
Press to exit from adjust mode.
Press to select H-POS/H-SIZE/V-POS/
V-SIZE/CLOCK PHASE.
During “VIDEO (S VIDEO)” and
“COMPONENT” input signal modes.During “RGB” and “PC” input
signal modes.
1
3 2 
						

							25
 Helpful Hint (    / NORMALIZE Normalization)
Adjus1OS./SIZE
H-POS
H-SIZE
V-POS
V-SIZE
CLOCK PHASE
(RGB/PC in Mode)When the Position Right “
” 
button is pressed
When the Position Right “” 
button is pressed
When the Position Right “” 
button is pressed
When the Position Right “” 
button is pressed
Flickering and distortion can be eliminated by using the Position Left “” 
or Right “” 
button to
carry out adjustment.
While the PICTURE POS./SIZE display is active, if either the N button on the remote control is pressed at any time or the
 
(ACTION button) is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings. When the Position Left “
” 
button is pressed
When the Position Left “” 
button is pressed
When the Position Left “” 
button is pressed
When the Position Left “” 
button is pressed
N 
						

							26
MUTE
SOUND
NORMALIZE
AUDIO  MENU
BASS
TREBLESTANDARD
ON 0
0 0
BALANCE
SURROUND
NORMAL
SOUND Adjustment
1
2
Select to adjust each item.
Press to select the desired adjustment menu.
Select the desired level by listening to the sound.
Automatically controls
proper volume level. Emits the original sound. BASS
Adjusts low sounds
TREBLE
Adjusts high sounds
BALANCE
Adjusts left and right
volumes
SURROUND (see next page)
Press the R button
Useful when answering the phone or receiving visitors.
Press this button to mute the sound.
Press again to reactivate sound. Sound is also reactivated when power is turned off or
volume level is changed.SURROUND
VOL
N
PICTURE SET UP
PICTURE
POS S
INPUT
R
SOUND
AUTO STANDARD
R
While the “SOUND” menu is displayed, if either the N button on the remote control is pressed at any time or the 
(ACTION button) is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.
 Helpful Hint (    / NORMALIZE Normalization)N
 To end adjustments
Note:
Press the SURROUND button to directly turn the surround effect ON and OFF. (see next page)
BASS, TREBLE and SURROUND settings are memorized separately for each SOUND mode (STANDARD, AUTO).Select ON or OFF
SOUND
Press to display the Sound menu. 
						

							27
SURROUND Controls
SURROUND Button
The benefits of surround sound are enormous. You can be
completely enveloped in sound; just as if you were at a concert
hall or cinema.
The surround setting switches ON and OFF each time the
SURROUND button is pressed.
ON               OFF
Note:
The surround settings are memorized separately for each SOUND mode
(STANDARD, AUTO).
PLASMA DISPLAY
VOL
NR
PICTURE SET UP
PICTURE
POS. /SIZE
OFF TIMER
PC
INPUT
ASPECT
SOUND
SURROUND
SURROUND
ON SURROUND 
						

							28
PICTURE
NORMALIZE
PICTURE  MENU
BRIGHTNESS
COLORSTANDARD
0
0
TINT
COLOR  TEMPNORMAL
ADVANCED  SETTINGSON PICTURE20
0
0
SHARPNESS
NORMAL
 Helpful Hint (    / NORMALIZE Normalization)
Press the left  
or right  
button to
select “ON”. Press the down 
 
button
to enter ADVANCED SETTINGS mode.
ADVANCED SETTINGS ON
Enables fine picture adjustment at a
professional level (see next page).
ADVANCED SETTINGS OFF
Displays images with settings of the
PICTURE menu.
PICTURE Adjustments
1
2Press to display the PICTURE menu.
Select to adjust each item.
Press to select the menu to adjust.
Select the desired level by looking at the picture
behind the menu.
PICTURE
STANDARD          DYNAMIC
CINEMA
Press the left  
or right  
button to switch between
modes.
STANDARD
For viewing in standard (evening lighting)
environments.
This menu selects the normal levels of
BRIGHTNESS and PICTURE.
DYNAMIC
For viewing in brighter environments.
This menu selects higher than normal levels of
BRIGHTNESS and PICTURE.
CINEMA
Ideal for movies.
Press the left 
 
or right  
button to switch between
modes.
NORMAL          COOL          WARM
While the “PICTURE” menu is displayed, if either the N button on the remote control is pressed at any time or the 
(ACTION button) is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.Note:
If you would like to change the picture and color of the
selected PICTURE menu to something else, adjust
using the items in the PICTURE menu. (see page 29)
N
PICTURE
NORMALIZE
PICTURE  MENU
BRIGHTNESS
COLORSTANDARD
0
0
TINT
COLOR  TEMPNORMAL
ADVANCED  SETTINGSON PICTURE20
0
0
SHARPNESS
NORMAL
NORMAL
ADVANCED  SETTINGS
NORMALIZE
BLACK  EXTENSION
W/B  HIGH  R
W/B  HIGH  B0
0
0 0
W/B  LOW  R
0
W/B  LOW  B
GAMMA2. 2 
						

							29
ADVANCED SETTINGS
 Helpful Hint (    / NORMALIZE Normalization)
Note:
In PICTURE, there is not a noticeable change even when contrast is increased with a bright picture or reduced with a dark
picture.
PICTURE Adjustments
Item
PICTURE
BRIGHTNESS
COLOR
TINT
(NTSC only)
SHARPNESS
 Effect                                Adjustments
Less             More
Darker           Brighter
Reddish        Greenish
Adjusts the proper picture contrast.
Adjusts for easier viewing of dark pictures
such as night scenes and black hair.
Adjusts color saturation.
Adjust for natural flesh tones.
Adjusts picture sharpness.
Notes:
(1) 
“COLOR” , “TINT” and “SHARPNESS”
settings cannot be adjusted for “RGB”
and “PC” input signal modes.
(2) You can change the level of each
function (PICTURE, BRIGHTNESS,
COLOR, TINT, SHARPNESS) for each
PICTURE menu.
(3) The setting details for STANDARD,
DYNAMIC and CINEMA respectively
are memorized separately for each
input mode (VIDEO (S VIDEO),
COMPONENT, RGB and PC).
(4) The “TINT” setting can be adjusted for
NTSC signal only during “VIDEO
(S VIDEO)” input signal.
Less             More
Less             More
N
Item
BLACK
EXTENSION
W/B HIGH R
W/B HIGH B
W/B LOW R
W/B LOW B
GAMMA
Effect
Less             More
Less             MoreLess             More
Less             More
Details
Adjusts the dark shades of the image in gradiation.
Adjusts the white balance for light red areas.
Adjusts the white balance for light blue areas.
Adjusts the white balance for dark red areas.
Adjusts the white balance for dark blue areas.
2.0    
2.2    
2.5
Notes:
(1) Carry out “W/B” adjustment as follows.
A   Adjust the white balance of the bright sections using the “W/B HIGH R” and “W/B HIGH B” settings.
B   Adjust the white balance of the dark sections using the “W/B LOW R” and “W/B LOW B” settings.
C   Repeat steps  A  and  B  to adjust.
Steps  A  and  B  affect each other’s settings, so repeat each step in turn to make the adjustment.
(2) 
The adjustment values are memorized separately for each input mode (VIDEO(S VIDEO), COMPONENT, RGB and PC).
(3) The adjustment range values should be used as an adjustment reference.
Less             More
Down              Up
On the remote control unit, while the “ADVANCED SETTINGS” menu is displayed, if either the N button is pressed at
any time or the 
 
(ACTION button) is pressed during “NORMALIZE”, then all adjustment values are returned to the
factory settings. 
						

							30
PRESENT TIME OF DAY Set
SET UP TIMER
The timer can switch the Plasma Display ON or OFF.
Before attempting Timer Set, confirm the PRESENT TIME OF DAY and
adjust if necessary. Then set POWER ON TIME/POWER OFF TIME.
Display the SET UP TIMER screen
To set up PRESENT TIME, follow the procedure described below.
Press to set up Hours or Minutes.
 button: Forward
 button: Back
SET UP
SURROUND
VOL
NR
PICTURE
INPUT
SOUNDSET UP
PRESENT TIME SETUP
PRESENT TIME OF DAY
HOURS ADJUSTMENT99 : 99
     00
MINUTES ADJUSTMENT     00
Press to display the
SETUP menu screen.
Press to select
SET UP TIMER.
Press to display the
SET UP TIMER
screen.
1
2
1
2
Press to select PRESENT TIME OF DAY.
Press to display the PRESENT TIME  OF
DAY SETTING screen.
Press to select HOURS ADJUSTMENT/
MINUTES ADJUSTMENT.
SET UP TIMER
PRESENT TIME
POWER ON FUNCTION0:52
OFF
POWER ON TIMEPOWER OFF FUNCTION
POWER OFF TIME
0:00
0:00
OFF
Press to complete PRESENT TIME OF
DAY setup.
PRESENT TIME SETUP
PRESENT TIME OF DAY
HOURS ADJUSTMENT0 : 52
     00
MINUTES ADJUSTMENT     52
SET  UP
SIGNAL
SCREENSAVER
COMPONENT/RGB-IN  SELECT
RGB
OSD  LANGUAGE
ENGLISH (
US)
SET UP TIMER