Home > Panasonic > Display > Panasonic HD Plasma Display Th 42phd5 Operating Instructions

Panasonic HD Plasma Display Th 42phd5 Operating Instructions

Here you can view all the pages of manual Panasonic HD Plasma Display Th 42phd5 Operating Instructions. The Panasonic manuals for Display are available online for free. You can easily download all the documents as PDF.

Page 31

31
TIMER Set
Press to display the POWER ON SET UP/
POWER OFF SET UP screen. Press to select
POWER ON TIME/POWER OFF TIME.
1
Press to select HOURS ADJUSTMENT/
MINUTES  ADJUSTMENT.
Press to adjust each time.
2
Press to select POWER ON FUNCTION/
POWER OFF FUNCTION.
Press to select ON.
4 3
Press twice to exit from SETUP.
R
SET UP TIMER
POWER ON SETUP
POWER ON FUNCTION
HOURS ADJUSTMENT0 : 52
     00
MINUTES ADJUSTMENT     52
SET UP TIMER
PRESENT TIME OF DAY
POWER ON FUNCTION0:52
OFF
POWER ON TIMEPOWER OFF...

Page 32

32
SCREENSAVER (For preventing after-images)
2
3 1
4
Press to display the SETUP menu screen.
SET UP
Press to select the SCREENSAVER.
Press to select the SCREENSAVER screen.
Press to select the FUNCTION.
Press to select the desired function.
Press to select the MODE.
Press to select each mode items. Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a SCREENSAVER should be used.
MODE selection
NEGATIVE / SCROLL selection
WHITE BAR SCROLL : A...

Page 33

33
Setup of SCREENSAVER Time
5
SCREENSAVER
Press to select START TIME/ FINISH TIME
(When TIME OF DAY  is selected).
Press to select SHOW DURATION/ SAVER
DURATION (When INTERVAL  is selected).
Press to select each time adjustment screen.
START TIME
START TIME0:00   00MINUTES ADJUSTMENT   00HOURS ADJUSTMENT
FINISH TIME
FINISH TIME0:00
MINUTES ADJUSTMENTHOURS ADJUSTMENT   00
   00
Press to select HOURS ADJUSTMENT/
MINUTES ADJUSTMENT.
Press to set up HOURS or MINUTES.
PERIODIC TIME
SHOW DURATION0:00
MINUTES...

Page 34

34
3D Y/C FILTER – For NTSC Video images
SET UP for Input Signals
COMPONENT/RGB IN SELECT
Select to match the signals from the source connected to the COMPONENT/RGB input terminals.
Y,  P
B, PR signals    
“COMPONENT”
R, G, B, HD, VD signals  
  
“RGB”
SURROUND
VOL
N
SOUND
INPUT
ASPECT
PICTURE
POS. /SIZE
PICTURESET UP
R
SET UP1
2
Press to display the SET UP menu screen.
Press to select the “COMPONENT/RGB IN
SELECT”.
Press to select the desired mode.
R
Press to exit from adjust mode.
Select “SIGNAL” from...

Page 35

35
SET UP for Input Signals
COLOR SYSTEM / Panasonic AUTO
Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input
signal mode.(“SIGNAL [VIDEO]” menu is displayed.)
Press to select the “COLOR SYSTEM” or
“Panasonic AUTO”.
Press to select each function.
3D  Y/C  FILTER  (
NTSC)
COLOR  SYSTEM
Panasonic  AUTO  (
4:3)ON
AUTO
NORMAL
3:2 PULLDOWNOFF
SIGNAL[ 
 VIDEO  ]
Press  
(ACTION) button
If the image becomes unstable:
With the system set on Auto, under conditions of
low level or noisy input signals...

Page 36

36
Select SIGNAL from the “SET UP” menu during RGB or PC input signal mode.
Press to select each item.
SET  UP
SIGNAL
SCREENSAVER
COMPONENT/RGB-IN  SELECT
RGB
OSD  LANGUAGE
ENGLISH (
US)
SET UP TIMER
SIGNAL[
  RGB  ]
SYNC
H
-FREQ.                 kHz
V
-FREQ.                  HzH & V
31.5
60.0
SYNC
SYNCH & V
SYNCON  VIDEO
SYNCON  G
Setting RGB sync signal:
Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT).
H & V:The H and V sync signals are input from the HD/VD...

Page 37

37
Troubleshooting
Before you call for service, determine the symptoms and make a few simple checks as shown below.
Symptoms
Some parts of the screen do not
light up
After-images appear
Whirring sounds can be heard
from the display unit.
Plasma Display panel
Check
The plasma display panel is manufactured using an extremely high level of precision
technology, however, sometimes some parts of the screen may be missing picture
elements or have luminous spots. This is not a malfunction.
Do not allow a still...

Page 38

38
TH-42PHD5 TH-50PHD5
120 V AC, 50/60 Hz
5 A 5.5 A
2.4 W 2.4 W
0.9 W 0.9 W
Drive method AC type Drive method AC type
42-inch, 16:9 aspect ratio 50-inch, 16:9 aspect ratio
3000:1
920 mm (W) × 518 mm (H) × 1,056 mm (diagonal) 1,106 mm (W) × 622 mm (H) × 1,269 mm (diagonal)
No. of pixels No. of pixels
786,432 (1,024 (W) × 768 (H)) [ 3,072 ×  768 dots] 1,049,088 (1,366 (W) × 768 (H)) [ 4,098 ×  768 dots]
34 °F - 104 °F (0 °C - 40 °C)
20 % - 80 %
NTSC, PAL, PAL60, SECAM, Modified NTSC
525i (480i), 625i...

Page 39

39
TH-42PHD5 TH-50PHD5
EUR646525
2 × AA Size
1 × J0KF00000018, 2 × J0KG00000054
2 × TMME187
TY-SP42PWD3W or TY-SP50PHD3W or
TY-SP42P5W-K TY-SP50P5W-K
TY-ST05-K
TY-ST42PW1
TY-ST42PF3
TY-CE42PS1
TY-WK42PV1
TY-WK42PR1
TY-WK42DR1
TY-WK42PRE1
TY-42TM4D
40.2” (1,020 mm) × 24” (610 mm) × 3.5” (89 mm) 47.6” (1,210 mm) × 28.5” (724 mm) × 3.9” (98 mm)
approx. 66.1 lbs (main unit only) approx. 94.8 lbs  (main unit only)
approx. 75.4 lbs (with speakers) approx. 104.9 lbs  (with speakers)
Specifications
Accessories...

Page 40

Printed in Japan
MBS0602S1072(MS)
Panasonic Broadcast & Television Systems Company
Unit of Matsushita Electric Corporation of America
Executive Office :
One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000
EASTERN ZONE : One Panasonic Way 4E-7 Secaucus, NJ 07094 (201) 348-7621
Mid-Atlantic/New England : One Panasonic Way 4E-7 Secaucus, NJ 07094 (201) 348-7621
Southeast Region : 1225 Northbrook Parkway, Ste 1-160 Swanee GA 30024 (770)338-6835
Central Region : 1707 N Randall Road E1-C-1, Elgin, IL...
Start reading Panasonic HD Plasma Display Th 42phd5 Operating Instructions

Related Manuals for Panasonic HD Plasma Display Th 42phd5 Operating Instructions

All Panasonic manuals