Panasonic HD Plasma Display Th 42pf50 Operating Instructions

11
Connections
Video equipment connection
SLOT:  
Terminal board (optional 
accessories) insert slot
(see page 5)
Note:
The right side slot is for terminal board 
with 2-slot width. The terminal board 
with 1-slot width does not function when 
installed in the right side slot.
AV IN (HDMI): 
HDMI Input Terminal 
Connect to video equipment 
such as VCR or DVD player.WIRELESS 
MODULE, LAN: 
Refer to “Operating 
Instructions, Network 
Operations”.DVI-D IN:   DVI-D Input Terminal
PC IN:   PC Input Terminal...

12
Example of Network Connection (Wired LAN)
Connections
To use the wireless function, the wireless module (ET-WM200U) (sold separately) is necessary.
When connecting the wireless module to the 
display, remove the protective fi lm and cap.
Connecting procedure Hold the wireless module with its LED on the near 
side and connect it to the wireless module connection 
terminal.
Note:
Do not connect any other device than the wireless 
module (ET-WM200U).
Display (main unit, rear)
Hub or broadband router LAN...

INPUT MENUENTER/+/
VOL-/
13
Power Indicator
Remote Control Sensor
Power ON / OFF
Connecting the AC cord plug to the Plasma Display.
Connecting the plug to the Wall Outlet.
Note: 
When disconnecting the AC cord, be absolutely sure to 
disconnect the AC cord plug at the socket outlet  fi rst.
Press the Power switch on the Plasma Display to turn the 
set on: Power-On. Power Indicator: Green
[Starting up the network]
It takes some time for the network to start up just after the 
power is turned on.
During...

English (UK) Deutsch 
Français   
Italiano 
 
Español 
 
ENGLISH (US) 
Русский  OSD LANGUAGE
SET 
SELECT 
DAY/TIME SETUPTIME    MON  99:99
SET
TIME99:99DAY MON
When 3D images will be viewed by unspeci
fi ed number of 
people or used for commercial applications, someone in 
authority should convey the following precautions.
These precautions should be followed in the home as well.
To enjoy 3D images safely and comfortably, please refer 
to the Operating Instructions for in-depth description.
Please refrain...

INPUT MENUENTER/+/
VOL-/
15
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu screen 
will switch. 
INPUT button (Input signal selection)
Basic Controls
Main Power On / Off Switch
Power Indicator
The Power Indicator will light.
• Power-OFF .... Indicator not illuminated (The unit will 
still consume some power as long as the 
power cord is still inserted into the wall 
outlet.)
• Standby  ........ Red Volume Adjustment
Volume Up “+” Down “–” 
When the menu screen is 
displayed:
“+” :...

16
Basic Controls
Remote Control Transmitter
RECALL buttonPress the “RECALL” button to 
display the current system status.
1  Input  label2  Aspect  mode 
  During 3D images    Audio input 
Profi  le name
    NANODRIFT SAVER operating
3  Off  timer
    The off timer indicator is 
displayed only when the off 
timer has been set.
4  Clock  display
Standby (ON / OFF) button
The Plasma Display must 
fi rst be plugged 
into the wall outlet and turned on at the 
power switch (see page 13).
Press this button to...

17
Specifi cations
TH-42PF50U TH-50PF50U
Power Source  110 - 127 V AC, 50/60 Hz
Power Consumption Rated Power Consumption 390 W
480 W
Stand-by condition 0.4 W
0.4 W
Power off condition 0.2 W
0.2 W
Plasma Display panel Drive method : AC type 42-inch, 
16:9 aspect ratio Drive method : AC type 50-inch, 
16:9 aspect ratio
Screen size 36.2” (921 mm) (W) × 20.4” (518 mm) (H) 
× 41.6” (1,057 mm) (diagonal) 43.5” (1,105 mm) (W) × 24.4” (622 mm) (H) 
× 49.9” (1,268 mm) (diagonal)
(No.of pixels) 2,073,600 (1,920...

18
Unit of Panasonic Corporation of 
North America 
Three Panasonic Way 2F-5 
Secaucus, NJ  07094Panasonic Professional Flat Panel DisplayLimited Warranty
Models or Parts Part
Warranty Labor
Warranty
Professional Flat 
Panel Display
LIMITS AND  EXCLUSIONS
There are no express warranties except as listed above.
THE WARRANTOR SHALL NOT BE LIABLE FOR 
INCIDENTAL OR CONSEQUENTIAL DAMAGES 
(INCLUDING, WITHOUT LIMITION, DAMAGE 
TO DISCS) RESULTING FROM THE USE OF THIS 
PRODUCT, OR ARISING OUT OF ANY BREACH OF...

19
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
LIMITED WARRANTY STATEMENT
Item
Video Tape
P2/SD Cards
Video Heads
D5 Video heads
Maintenance Items
Colour Camera CCD
Imaging Block
BT-H Series LCD Monitors
* DLP™ Projectors
* LCD Projectors above 2,500 ANSI Lumens
* LCD Projectors below 2,500 ANSI Lumens
Projector Lamps
103 inch Plasma displays Hard Drive Disk Unit Parts
30 days — Replacement only 
(content not covered)
(Content not covered)
1 year or 2,000 hrs. (prorated)...

20