Panasonic Hd Integrated Camera Aw He60 Operating Instructions

11
Selecting the shooti\png modes (scene fi\ples)(continued)
p
w How to select the sho\poting 
mode
When performing the operatio\pns  
using the wireless \premote control
2, 8
4, 6, 7
3, 5, 7 1
1	Press the [CA\b1], [CA\b2], [CA\b3] or [CA\b4] 
button to select the\p unit.
2	Press the [\bENU] button for 2 seconds.
The Top Menu is displayed.
      T o p   M e n u  
  C a m e r a         S c e n e :   F u l l A u t o  S \f s t e m  M a i n t e n a n c e
3	Press the [] or [] button to bring the\p cursor...

12
Selecting the shooti\png modes (scene fi\ples)(continued)
When performing the operatio\pns using the contr\poller
When the AW‑RP655 is connecte\pd:
1	Press one of the [\p1] to [5] buttons of 
[CONTROL/PREVIEW \bONITOR OUT SEL] to 
select the unit whi\pch is to be operated\p.
2	Press the [\bENU] button to set the L\pCD panel 
displa\f to the menu mode.
3	Turn the jog dial (m\pain) until CA\bERA SE\pTTING 
appears, and press the [OK]\p button.
CAMERA SETTING
            OK Key\
4	When the scene...

13
Shooting
When performing the operatio\pns  
using the wireless \premote control
p
q Changing the camer\pa’s direction
  \boving the camera toward the left or right\p (panning):
    Press the [] or [] button.
  \boving the camera up \por down (tilting):
    Press the [] or [] button.
  \boving the camera dia\pgonall\f:
      Press the [] or [] button and [] or [] button at 
the same time.
  Returning the came\pra to the reference position:
    Press the [HOM\f] button for 2 seconds.
p
q Using...

14
What to do when en\pcountering problems in 
the basic shooting\p operations
If the trouble is not resolved by taking the action \esuggested 
below, refer to “Troubleshooting” (page 43 in the )\e.
When performing the operatio\pns  
using the wireless \premote control
The unit does not \pmove.
p
 Press the [C\bM1], [C\e\bM2], [C\bM3] or [C\bM\e4] button to 
select the unit whic\eh is to be operated.  
If only one unit is\e being used, it is \enormally selected using \e
the [C\bM1] button.
p
 Check...

15
\bore advanced operations
\banual shooting (see p\pages 16 to 19)
p
 Manual adjustment of f\eocus
p
 Manual adjustment of i\eris
p
 Manual adjustment of s\ehutter speed
p
 Manual adjustment of g\eain
Preset memories (s\pee pages 20 to 22)
p
 Up to 100 settings for the camera direction (pannin\eg and 
tilting), zoom, focus, iris, gain up and white balance can be 
registered in the pre\eset memories, and called.
p
 The number of settings t\ehat can be registere\ed and 
called depends on the \etype...

16
\banual shooting
p
w \banuall\f adjusting the focus
The lens focus can be adjuste\ed manually.
When performing the operatio\pns  
using the wireless \premote control
1	Press the [\b/FOCUS] \pbutton to switch the 
focus to manual adjustment.
2	Press the [F] or [\pN] button of [FOCUS] to\p adjust 
the focus.
When the [F] button is pressed, th\ee focus moves further 
away (far); conversely, when the [N] button is pressed, it\e 
moves nearer (near).
The speed of focusing and other a\edjustments can 
be...

17
\banual shooting(continued)
p
w \banuall\f adjusting the iri\ps
The lens iris can be adjusted \emanually.
When performing the operatio\pns  
using the wireless \premote control
1	Press the [\b/IRIS] b\putton to switch the iris to 
manual adjustment.
2	Adjust the iris us\ping the [IRIS +] or [IRIS –] 
button.
Press the [IRIS +] button to adjust th\ee lens iris in the 
opening direction; conversely, press the [IRIS –] button to 
adjust the lens iris in the closing d\eirection.
3	If necessar\f, press the...

18
\banual shooting(continued)
p
w \banuall\f adjusting the shutter 
speed
The shutter speed can\e be set using two methods. One is 
a method that specif\eies the time (where a\e time such as 
1/250 sec. is designated), an\ed the other is a met\ehod that 
specifies the frequen\ecy (where synchro s\ecan, 60.24 Hz*, etc. 
is designated).
When shooting a TV screen or PC mon\eitor screen, the 
horizontal noise generated when the screen \eis shot can 
be minimized by adjusting the fre\equency to the screen\e...

19
\banual shooting(continued)
p
w \banuall\f adjusting the gai\pn
There are two ways to adjust the ga\ein. One way involves 
using the buttons on the wirele\ess remote control or\e controller; 
the other way involves using the Camera menu or Web 
setting.
The gain can be adj\eusted more precisely \eusing the Camera 
menu or Web setting.
For further details, refer to the [Gain] it\eem on page 42 and 
page 72.
p
 When adjusting the \egain, the light qua\entity may 
change suddenly (cau\esing the image...

20
Preset memories
This unit enables up to 100 settings for the camera direction 
(panning and tiltin\eg), zoom, focus, iris, gain and white 
balance to be regist\eered in its preset me\emories, and called.
However, the number of settings t\ehat can be registere\ed and 
called depends on the \etype of wireless remo\ete control or 
controller that is u\esed for operation.p
 The focus and iris operating modes (manual and auto 
settings) are neithe\er registered nor rec\ealled.  
The current focus and iris...