Panasonic Hc X920 Owners Manual

- 31 -
≥Sound will be heard only during normal playback.
≥ If pause play is continued for approx. 5 minutes, the screen returns to the thumbnails.
≥ The elapsed time for playback indication will be reset to 0h00m00s each scene.
≥ When playing back with [ALL AVCHD] selected, the screen may become black momentarily at the 
time the scene switches.
≥ The speaker of this unit does not output sounds when connected to a TV.
Motion picture compatibility
≥This unit is based on AVCHD 3D/AVCHD...

- 32 -
≥Touch   (left side)/  (right side) of   on the Touch Menu to display  . ( l18)
1To u c h  .
2Touch the top menu  A.
3Touch the submenu B.
≥ Next (previous) page can be displayed by 
touching / .
4Touch the desired item to enter the 
setting.
5Touch [EXIT] to exit the menu 
setting.
∫ About  guide display
After touching  , touching the submenus and 
items will cause function descriptions and settings 
confirmation messages to appear.
≥After the messages have been displayed, the 
guide display is...

- 33 -
Using the quick menu
This allows quick setting of some of the menus.
≥Touch   (left side)/  (right side) of   on the Touch Menu to display  . ( l18)
1To u c h  .The following menus can be set. Touch the desired menu.
≥The items displayed differ depending on the position of the mode switch or settings.
2Touch the desired item to enter the setting.
3Touch [EXIT] to exit the quick menu.
IconFunctionPage
[REC MODE]
l71
[PICTURE SIZE]
l84
[POWER LCD]
l39
[GUIDE LINES]
l69
[LEVEL GAUGE]
l77
[MIC LEVEL]...

- 34 -
Set the display method for the screen information display.
Please refer to page 19.
It is possible to display and record the time at the travel destination by selecting your home region 
and the travel destination.
1 Select the menu.
≥If the clock is not set, adjust the clock to the current time. ( l19)
≥ When the [HOME] (your home region) is not set, the message appears. Touch [ENTER] and 
proceed to Step 3.
2 (Only when setting your home region)
To u c h  [ H O M E ] .
≥Touch [ENTER].3 (Only...

- 35 -
≥When the home region is set for the first time, the screen for selecting home/travel destination 
appears after setting the home region successively. If the home region has already been set 
once, execute the menu operation for Step 1.
5 (Only when setting the region of your 
travel destination)
Touch  /  to select your travel 
destination and touch [ENTER].
≥Touch [DAYLIGHT SAVING] to set daylight 
saving time.   appears and the summer 
time setting is turned on. The travel destination 
time and...

- 36 -
You can set the display method of the zoom button icons ( / ) and recording button icon 
().
Please refer to page 62.
Please refer to page  11 2.
When about 5 minutes have passed without any operation, this unit automatically turns off to save 
battery life.
≥ This unit will not automatically turn off even if the [ECONOMY (BATT)] is set to [ON] in following 
cases:
jUsing the AC adaptor*
j Using the USB cable for PC, etc.
j PRE-REC is used
j During slide show playback
j Wi-Fi function
* When...

- 37 -
The unit is put into recording pause approx. 1 second when the unit is turned on with the mode set 
to  or .
≥Depending on the recording conditions, start time may be longer than 1 second.
≥ In the Quick Power On Mode, the zoom magnification becomes approx. 1 k.
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened or the 
viewfinder is extended.
≥ When in Quick Start Standby Mode about 70% of the power used in recording pause mode 
is being consumed, so the...

- 38 -
The recording lamp lights up during recording and flashes when the Self-timer is counting down.
When this is set to [OFF], it does not light during recording.
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed with this 
sound. 
When [OFF] is selected, the sound is not output at the start/end of recording, etc.
2 Beeps for 4 times
When an error occurs, follow the instructions displayed on the screen. (l183 )
You can change the operation icons to display in...

- 39 -
This makes it easier to view the LCD monitor in bright places including outdoors.
≥These settings will not affect the images actually recorded.
≥ It is possible to set from the quick menu. ( l33)
≥When the AC adaptor is in use, the LCD monitor is set to [ON] automatically.
≥ When the LCD monitor is bright, the recordable time with the battery will be shorter.
It adjusts brightness and color density on the LCD monitor.
≥ These settings will not affect the images actually recorded.
1 Select the...

- 40 -
Please refer to page 111.
Please refer to page  163, 166.
Set to [YES] for changing the menu settings back to the default condition.
≥ Settings for [MEDIA SELECT]
*, [CLOCK SET] and [LANGUAGE] will not be changed.
* For users who have  / , this menu is not displayed.
Set to [YES] for changing the Wi-Fi settings back to the default condition.
≥ The “LUMIX CLUB” Login ID and Wi-Fi Password are also deleted.
The entered character is confirmed in approx. 1 second after character input, and the cursor...