Panasonic Hc W850 Owners Manual

- 31 -
≥Touch   (left side)/   (right side) of   on the Touch Menu to display  . ( l21)
1To u c h  .
2Touch the top menu  A.
3Touch the submenu B.
≥ Next (previous) page is displayed by touching 
/.
4Touch the desired item to enter the 
setting.
5Touch [EXIT] to exit the menu 
setting.
∫About  guide display
After touching  , touching the submenus 
and items will cause function descriptions and 
settings confirmation messages to appear.
≥After the messages have been displayed, the 
guide display is...

- 32 -
Set the display method for the screen information display.
Please refer to page 22.
It is possible to display and record the time at the travel destination by selecting your home region 
and the travel destination.
1 Select the menu.
≥If the clock is not set, adjust the clock to the current time. ( l22)
≥ When the [HOME] (your home region) is not set, the message appears. Touch [ENTER] and 
proceed to Step 3.
2(Only when setting your home region)To u c h  [ H O M E ] .≥Touch [ENTER].
3(Only when...

- 33 -
4(Only when setting the region of your travel destination)
Touch [DESTINATION].≥Touch [ENTER].
≥ When the home region is set for the first time, the screen for selecting home/travel destination 
appears after setting the home region successively. If the home region has already been set 
once, execute the menu operation for Step 1.
5(Only when setting the region of your travel 
destination)
Touch  /  to select your travel 
destination and touch [ENTER].
≥Touch [DAYLIGHT SAVING] to set daylight...

- 34 -
It is possible to change the date and time display mode.
≥The date and time are not displayed while the recording mode switching icon is displayed. ( l19)
≥ When the Touch Shutter is enabled, the recording mode switching icon is constantly displayed. 
This causes the date and time to disappear from the screen.
It is possible to change the date format.
You can set the display method of the zoom button icons ( / ) and recording button icon ( ).
Please refer to page 66 .
Please refer to page 11 5 ....

- 35 -
When about 5 minutes have passed without any operation, this unit automatically turns off to save 
battery life.
≥This unit will not automatically turn off even if [ECONOMY (BATT)] is set to [ON] in following 
cases:
jUsing the AC adaptor*
j Using the USB cable for PC etc.
j PRE-REC is used
j During slide show playback
j Using the Wi-Fi function
* When [ECONOMY (AC)] is activated, this unit automatically turns off.
When about 30 minutes have passed without any operation while connecting AC adaptor...

- 36 -
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.
≥When in Quick Start Standby Mode about 50% of the power used in recording pause mode 
is being consumed, so the recording time will be reduced.
≥ Quick Start will not work if there is no SD card inserted.
1 Select the menu.
2 Close the LCD monitor.
The status indicator  A flashes green and the unit goes into 
Quick Start Standby Mode.
≥ The lens cover does not close.
3 Open the LCD monitor.The status...

- 37 -
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed with this 
sound.
When [OFF] is selected, the sound is not output at the start/end of recording, etc.
2 Beeps for 4 times
When an error occurs, follow the instructions displayed on the screen. (l196 )
You can change the operation icons ( l67) to display in the Touch Menu.
Register 3 favorite operation icons.
≥ The default settings are as follows:
1 Select the menu.
2 Touch the operation icon you would like...

- 38 -
This makes it easier to view the LCD monitor in bright places including outdoors.
≥These settings will not affect the images actually recorded.
≥When the AC adaptor is in use, the LCD monitor is set to   automatically.
≥ Recordable time with the battery is shortened when the LCD is made brighter.
≥ When the video light is set to   ([ON]) or   ([AUTO]) and it is lit, it cannot be set.
It adjusts brightness and color density on the LCD monitor.
≥ These settings will not affect the images actually...

- 39 -
Set to [YES] for changing the menu settings back to the default condition.
≥Settings for [CLOCK SET] and [LANGUAGE] will not be changed.
≥If you restore the default settings, this unit will switch to the Motion Picture Recording Mode.
Set to [YES] for changing the Wi-Fi settings back to the default condition.
≥ The “LUMIX CLUB” Login ID and Wi-Fi Password are also deleted.
You can delete the music ( l92, 99 , 104 ) stored on this unit as [USER BGM].
The entered character is confirmed in approx. 1...

- 40 -
Set the file number of the MP4/iFrame and still picture recorded next to 0001.
≥Folder number is updated and file number will start from 0001. ( l190 )
≥ To reset the folder number, format the SD card, and then perform [NUMBER RESET].
≥The file numbers of still pictures you record in Stop Motion Animation Assist Mode are not reset.
Please be aware that if a medium is formatted, then all the data recorded on the medium will be 
erased and cannot be restored. Back up important data on a PC, DVD disc...