Panasonic HC V770 Owners Manual

							- 151 -
∫
In Playback Mode
≥Playback
≥ Switching between thumbnails (AVCHD/4K MP4*1, 2/MP4/Backup (Backup for Twin Camera)/
JPEG (Still picture))
≥ Delete
≥ Save (Copy)
jScenes recorded in AVCHD cannot be copied.
j Scenes recorded in iFrame can only be copied with iOS devices.
j Depending on your smartphone, scenes recorded in MP4 format may not be copied.
≥ Smart Home Network
jIt is possible to post to SNS or perform playback operation when this unit is connected to the 
DLNA-compatible TV via wireless access point using a smartphone .
≥ Creating and saving scenes with Highlight Playback 
Highlight Playback is not available for the following scenes :
jiFrame scenes
j Scenes recorded with FULL HD Slow Motion Video Mode ( l61)
j Scenes recorded as Backup for Twin Camera
j MP4 scenes saved as Highlight Playback
j Scenes that were converted to MP4 scenes and copied (with the M P4 conversion function) 
( l 121 )
*3
≥Highlight Photo Collage
jParts that were recognized as clearly recorded are automaticall y extracted from multiple 
scenes and saved as still picture s. (Highlight Photo Collage is not available for 4K MP4 
scenes
*1, 2 and MP4/iFrame scenes.)
j In addition, the multiple still pictures you have captured can  be put in a frame and saved as a 
single still picture.
*1
*2
*3 / Excluding scenes that were converted from 4K MP4 scenes
≥Creative Control Mode and HDR Movie Mode will not be available.
≥ If you record an image when the LCD monitor of this unit is clo sed with the screen facing outward, 
the LCD monitor turns off.
WX970VX870WX970VX870 
						

							- 152 -
You can use your smartphone to check on your baby being monitored by this unit when you are in 
another room. The smartphone and this unit can be used like rad io transceivers, allowing the users 
to have a conversation by taking turns. This unit can also send  a notification to the smartphone 
whenever the baby cries.
Preparations before using [Baby Monitor]
1 Check if the wireless access point is compatible with IEEE802.1 1b/g/n.
2 Install the smartphone application “Image App” on your smartpho ne. (l174)
3 Set up a Wi-Fi connection between this unit and the wireless ac cess point.
≥[WPS Connection] ( l178 )
≥ Searching for wireless access points to set up a connection ( l179)
≥ Setting up a connection manually ( l180 )
When the Wi-Fi connection is complete, proceed to “Using [Baby  Monitor]”.
≥Using [Wi-Fi Setup Wizard], you can also set up a Wi-Fi connect ion in conjunction with the 
smartphone application “Image App”. ( l176 )
Wi-Fi
[Baby Monitor]
≥You need to turn on the Wi-Fi function of your smartphone.
≥ If [CLOCK SET] ( l21) is not set correctly, the sound detection function will not w ork 
( l 153 ).
≥ Notifications cannot be sent to more than one smartphone.
≥ Check your contract details carefully, as smartphone and intern et contract details may 
result in high communication charges being incurred, or a limit  placed on 
communication traffic.
Caution:
≥ It is the responsibility of parents or guardians to check on th eir child. Use [Baby Monitor] 
only as an aid.
≥ Place this unit so that it will be out of the reach of the baby .
*NBHF
QQ
XXXXXXXXXXXXXXXXXXXXXXXXXXX 
						

							- 153 -
Using [Baby Monitor]
1Press Wi-Fi button on this unit and touch [Baby Monitor]. ≥The SSID of the wireless access  point to which this unit is connected is displayed.
2Connect the smartphone to a wireless access point.≥To connect it, select the SSID of the wireless access point dis played on the screen of this unit.
3Start up the smartphone application “Image App”.≥When this unit is connected to the Internet via the wireless ac cess point, the notification function, 
which sends notifications from this unit to the smartphone, bec omes available.
≥ When the connection is complete, the screen of this unit turns  off. To turn on the screen again, 
touch the screen.
To exit [Baby Monitor]:
Touch [EXIT] displayed on the screen of this unit or press the  Wi-Fi button.
≥The message is displayed. Touch [YES] to close the indication.
∫ Checking on the baby in your house
You can check the image of the baby being monitored on your sma rtphone.
≥ Images of baby-monitoring cannot be recorded.
≥ It cannot be confirmed with multiple smartphones simultaneously .
∫Voice message function
The smartphone and this unit can be used like radio transceivers, allowing the users to have a 
conversation by taking turns.
≥A voice message of up to 1 minute can be sent.
≥ Open the LCD monitor of this unit when using the Voice message  function.
∫Sending notifications to your smartphone
In the following cases, this unit sends a notification to the s martphone:
≥ When baby monitoring starts
≥ When a sound is detected
∫ Sound detection
When this unit detects a sound, it can automatically send a not ification to the connected 
smartphone.
≥ This function can be used only if this unit is connected to the  Internet via the wireless access 
point when [Baby Monitor] is used.
≥ Depending on the sound detection sensitivity setting and record ing conditions, sounds may not 
be detected. Test the sound detection function in advance to ch eck if sounds can be detected and 
notified.
What you can do with [Baby Monitor] 
						

							- 154 -
Touch [Setup] on the screen of this unit, and select the item you want to set.
∫[Notification Setup]
This sets whether to send a notification to the smartphone when a sound is detected.
∫[Notification Test]
This tests if a notification can be sent to the smartphone when  a sound is detected.
∫[Remote Voice Level]
This sets the voice message volume.
∫[Sound Detection Sensitivity]
This sets the sound detection sensitivity.
≥[Sound Scene Select] is set to [Auto].
Changing [Baby Monitor] settings
[ON]/[OFF]
(Volume high)/ (Volume low)
[High]/[Low] 
						

							- 155 -
You can confirm the recording screen of this unit from outside using a smartphone.
Preparations before using [Home Cam]
1Check if the wireless access point is compatible with IEEE802.1 1b/g/n.
2 Install the smartphone application “Image App” on your smartpho ne. (l174)
3 Check if the smartphone is an Android (NFC-compatible), Android  (non-NFC-
compatible), or iOS device.
≥ If your smartphone is NFC-compatible, the NFC mark will be disp layed when starting up the 
“Image App”.
4 Set up a Wi-Fi connection between this unit and the wireless ac cess point.≥[WPS Connection] ( l178 )
≥ Searching for wireless access points to set up a connection ( l179)
≥ Setting up a connection manually ( l180 )
When the Wi-Fi connection is complete, proceed to “Using [Home  Cam]”.
≥Using [Wi-Fi Setup Wizard], you can also set up a Wi-Fi connect ion in conjunction with the 
smartphone application “Image App”. ( l176 )
Wi-Fi
[Home Cam]
≥Switch the Wi-Fi setting to off on your smartphone and use with  mobile network such 
as 3G.
≥ If [CLOCK SET] ( l21) is not set correctly, [Home Cam] cannot be used.
≥ Check your contract details carefully, as smartphone and intern et contract details may 
result in high communication charges being incurred, or a limit  placed on 
communication traffic.
Caution:
This function is not designed for anti-theft or disaster use.
*NBHF
QQXXXXXXXXXXXXXXXXXXXXXXXXXXX 
						

							- 156 -
Using [Home Cam]
≥Perform the home monitoring operation on the smartphone. ( l160 )
≥ When the firewall is turned on, the Wi-Fi function may not work  correctly. If this occurs, check the 
network settings.
∫ If the device is Android (NFC-compatible)
≥Set the NFC function of the smartphone to ON.
1Turn off the Wi-Fi setting of the smartphone.
2Start up the smartphone application “Image App”.≥When a Wi-Fi connection guidance screen is displayed, select [N O].
3Enable the home monitoring setting from the menu of the smartph one 
application “Image App”.
≥ Select [  (MENU)]  # [Application function]  # [Home Monitor], and enable [Use Home 
Monitor].
4Select [Set connect. dest.] of the smartphone.
5Touch the smartphone on   of this unit.≥ Touch the NFC mark while a message asking you to touch the 
NFC mark on the device is displayed on the smartphone 
screen.
≥ If this is the first time the smartphone is connecting to this  unit, 
touch [YES] on the screen of this unit, and then touch the 
smartphone on   of this unit again.
≥ If the unit is not recognized even when touching the smartphone , change positions and try again.
≥ You cannot set up a connection when recording an image with thi s unit.
≥ Check that the message “Connecting...” has disappeared from thi s unit.
6When [Start “Home Cam”?] is displayed on the smartphone, select  [YES].
7Start home monitoring.
∫Connecting with Android (non-NFC-compatible) or iOS device
1Press Wi-Fi button on this unit and touch [Home Cam]. 
2Turn off the Wi-Fi setting of the smartphone.
3Start up the smartphone application “Image App”.≥(If the device is Android)
When a Wi-Fi connection guidance screen is displayed, select [N o].
≥ (If the device is iOS)
If a confirmation message for the Wi-Fi setup is displayed, sel ect [Close].
4Enable the home monitoring setting from the menu of the smartph one 
application “Image App”.
≥ Select [  (MENU)]  # [Application function]  # [Home Monitor], and enable [Use Home 
Monitor].
When using the home monitor function for the first time 
						

							- 157 -
5Select [Set connect. dest.] of the smartphone.
6Enter the Device ID and Password displayed on the screen of this unit into 
the smartphone.
≥ When the entry is complete, select [OK] (on your Android device ) or [Complete] (on your iOS 
device).
≥ If you want to check the Device ID and Password after performin g Step 7, on the screen of this 
unit, touch [Setup]  # [Home Monitor Connect].
7Touch [ENTER] on the screen of this unit≥Check that the message “Connecting...” has disappeared from thi s unit.
8On the smartphone, select [Start Home Monitor] to start home mo nitoring.
∫When configuring the home monitor settings using QR code
1Press Wi-Fi button on this unit and touch [Home Cam]. 
2Touch [QR code].≥QR code is displayed on the screen of this unit.
3Turn off the Wi-Fi setting of the smartphone.
4Start up the smartphone application “Image App”.≥(If the device is Android)
When a Wi-Fi connection guidance screen is displayed, select [N o].
≥ (If the device is iOS)
If a confirmation message for the Wi-Fi setup is displayed, sel ect [Close].
5Enable the home monitoring setting from the menu of the smartph one 
application “Image App”.
≥ Select [  (MENU)]  # [Application function]  # [Home Monitor], and enable [Use Home 
Monitor].
6Select [Set connect. dest.] of the smartphone.
7On the smartphone, select [QR code], and scan the QR code displ ayed on the 
screen of this unit.
≥ A device ID and password will be created. Select [OK] (on your  Android device) or [Complete] (on 
your iOS device).
8Touch [NEXT] on the screen of this unit.≥ Check that the message “Connecting...” has disappeared from thi s unit.
9On the smartphone, select [Start Home Monitor] to start home mo nitoring.
To exit [Home Cam]:
Touch [EXIT] displayed on the screen of this unit or press the  Wi-Fi button.
≥The message is displayed. Touch [YES] to close the indication. 
						

							- 158 -
∫
If the device is Android (NFC-compatible)
≥Set the NFC function of the smartphone to ON.
1Start up the smartphone application “Image App”.≥When a Wi-Fi connection guidance screen is displayed, select [N O].
2Display the screen of a connection setup to home monitor from t he menu of a 
smartphone.
3Touch the smartphone on   of this unit.≥ Touch the NFC mark while a m essage asking you to touch the 
NFC mark on the device is displayed on the smartphone 
screen. 
≥ If the unit is not recognized even when touching the 
smartphone, change positions and try again.
≥ You cannot set up a connection when recording an image with 
this unit.
≥ A confirmation screen is displayed on the screen of a 
smartphone. Touch [YES] to start home monitor.
≥ This unit is turned on even if i t touches the smartphone on   of  this unit, where this unit is 
turned off with a LCD monitor.
∫ If the device is Android (n on-NFC-compatible) or iOS
1Press Wi-Fi button on this unit and touch [Home Cam]. 
2Start up the smartphone application “Image App”.≥When a Wi-Fi connection guidance screen is displayed, select [N O].
≥ Use the smartphone to start home monitor.
To exit [Home Cam]:
Touch [EXIT] displayed on the screen of this unit or press the  Wi-Fi button.
≥The message is displayed. Touch [YES] to close the indication.
≥After turning off this unit with the LCD monitor, you can also  turn on this unit and start the NFC 
communication by touching the smartphone on   of this unit. (If  you have turned off this unit 
with the power button, this uni t will not turn on by touching the smartphone on   of this unit)
≥ The following operations allow you to register up to ten smartp hones. If the number exceeds ten, 
smartphone information with the oldest registration date and ti me will be deleted.
j Touching an NFC-compatible smartphone on this unit.
j Setting [Direct Connection Password] to [OFF] and connecting th is unit and a smartphone 
directly.
≥ Please refer the instructions for the device you are using for  information on how to set up and use 
a NFC-compatible smartphone.
When using the home monitor function for the second time or lat er 
						

							- 159 -
The image and sound may be interrupted or the connection may be terminated depending on your 
line conditions. Use the recommended optimal speed (upstream) below as a guide to make 
necessary settings.
∫ Recommended optimal speed (upstream) for the broadband line, mo bile 
router (tethering), etc. connected to this unit
≥ For information on the optimal speed, contact your service prov ider, etc.
≥Operation cannot be guaranteed for all devices.
≥ Even with a broadband line, the recommended optimal speed may n ot be reached depending on 
your environment.
≥ Narrowband lines such as analog modems cannot be used.
≥ If the line for the smartphone is switched, communication may be interrupted. In that case, 
connect again.
Image quality
Recommended optimal speed 
(upstream)
500 kbps or higher
If you have difficulty establishing a connection with [Home Cam ] or the connection is 
disconnected, wait for a while, and connect again. If the conne ction still cannot be established, 
check the settings from the menu of the smartphone application  “Image App” below.
[ (MENU)]  # [Application function]  # [Home Monitor]  # [Advanced Settings]
Refer to [Help] in the “Image App” menu about the settings. 
						

							- 160 -
Refer to [Help] in the “Image App” menu about how to operate.
What you can operate/set with a smartphone during home monitoring
∫What you can operate with a smartphone
Confirm the condition inside the house
The monitoring video can be confirmed.
≥The monitoring image can be recorded as a video or a still pict ure.
≥ It cannot be confirmed with multiple smartphones simultaneously .
≥ Depending upon the environment in which the device is used, mot ion picture may be like a 
frame rate is low.
Voice message
The smartphone and this unit can be used like radio transceivers, allowing the users to have a 
conversation by taking turns. ≥You can talk up to 10 seconds in 20 second interval.
≥ Open the LCD monitor of this unit when using the Voice message  function.
∫What you can set with a smartphone
Moving/non-moving object detection
This unit can detect moving objects and non-moving objects in t he home monitoring detection area.
≥ Once this unit is set to home m onitoring (home monitoring stand by state), it cannot detect 
moving objects for up to 5 minutes.
≥ Detection of some moving and stationary subjects may not be pos sible due to the condition of 
the subject. Check beforehand to s ee if detection of the moving or stationary object can be 
detected.
≥ If the movement of the subject is too fast or too slow, if the  subject is too small, or if the 
surroundings are too dark, detection of moving and stationary o bjects may be impossible.
Automatic recording
You can record a motion picture on this unit as it detects a mo ving or non-moving object.
≥ Automatic recording will record for approximately 30 seconds.
≥ Automatic recording can record a maximum of 1 hour 15 minutes p er day. Check the remaining 
available recording time.
≥ When automatic recording is performed with moving object detect ion, automatic recording is 
performed only once within the set time.
≥ When automatic recording is performed with non-moving object de tection, the set time will be 
reset and non-moving object detection will start again.