Panasonic Hc V10 Owners Manual

							21VQT4C31
Charging the battery
∫Charging with an AC adaptor.
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is 
always “live” as long as the AC adaptor is connected to an electrical outlet.
Important:
≥Be sure to use the supplied AC adaptor and USB cable. Do not use parts supplied 
with other equipment.
≥ The AC adaptor and USB cable are for use with this unit only. Do not use them with 
other equipment. Similarly, do not use AC adaptors and USB cables from other 
equipment with this unit.
≥ The battery can also be charged using a battery charger (VW-BC10PP: optional).
≥ The battery cannot be charged when the power is on. Press the power button to turn 
off the power. ( l27)
≥ It is recommended to charge the battery in a temperature between 10  oC and 30  oC 
(50  oF and 86  oF). (The battery temperature should also be the same.)
A USB terminal
B To the AC outlet
≥ Insert the plugs as far as they will go.
1Open the LCD monitor.
2Connect the USB cable to the AC adaptor.≥Check that the plug portion of the AC adaptor is not loose or misaligned.≥Do not use any other AC adaptors except the supplied one.
≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed 
with any other USB cables.)
3Plug the AC adaptor into the AC outlet.
4Connect the USB cable to the unit.
≥The status indicator  C will flash red for approx. a 2 second time period (off for approx. 1 second, 
on for approx. 1 second), indicating that charging has begun.
It will turn off when the charging is completed.
When this unit is purchased, the battery is not charged. Charge the battery fully 
before using this unit for the first time.
 



 
HC-V10&V10M&V11MP9_PC_PU_VQT4C31_mst.book  21 ページ  ２０１２年１月１３日　金曜日　午後８時２分 
						

							22VQT4C31
∫Connecting to the AC outlet
If you turn on the unit while connecting with the AC adaptor, you can use the unit with power 
supplied from the outlet.
When recording for a long time, keep the AC adaptor connected and use it together with the battery.
∫Connecting to a PC and charging.
Charge the unit if you do not have the AC adaptor handy.
A USB cable (supplied)
≥ Insert the plugs as far as they will go.
≥ Press the power button and turn the power off. ( l27)
1Turn the power of the PC on.
2Connect the USB cable.≥The status indicator  B will flash red for approx. a 2 second time period  (off for approx. 1 second, 
on for approx. 1 second), indicating that charging has begun.
It will turn off when the charging is completed.
≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed 
with any other USB cables.)
≥ Always connect directly to a PC.
≥ You cannot charge when the status indicator flashes rapidly, or when it does not light at all. 
Charge using the AC adaptor. ( l21)
≥ It will take 2 or 3 times longer to charge compared to when using the AC adaptor.


HC-V10&V10M&V11MP9_PC_PU_VQT4C31_mst.book  22 ページ  ２０１２年１月１３日　金曜日　午後８時２分 
						

							23VQT4C31
≥If the status indicator flashes at a particularly fast or slow rate, refer to page 103.
≥ If you do not intend to use the unit for an extended period, disconnect the USB cable from 
the unit for safety.
≥ Charging may not be possible depending on the  operating environment of the PC being 
used (such as custom-made PC).
≥ Charging will stop when turning the power of  the PC off or forcing it into sleep mode. 
Charging will start again when turning the powe r of the PC on again, or waking from sleep 
mode.
≥ When connected to a PC, an error message may be displayed at the top of the PC screen. 
For more details, refer to page 99.
≥ The unit will be charged if it is connected to a Panasonic Blu-ray disc recorder or DVD 
recorder with a USB cable, even if the power is turned off.
≥ We recommend using Panasonic batteries. ( l1 2 ,  2 4 ,  111 )
≥ If you use other batteries, we cannot guarantee the quality of this product.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time 
with doors and windows closed.
HC-V10&V10M&V11MP9_PC_PU_VQT4C31_mst.book  23 ページ  ２０１２年１月１３日　金曜日　午後８時２分 
						

							24VQT4C31
Charging and recording time
∫Charging/Recording time
≥Temperature: 25 oC (77 oF)/humidity: 60%RH
≥ Time in the parenthesis is charging time when this unit is connected to a PC, Panasonic 
Blu-ray disc recorder, or DVD recorder.
≥ These times are approximations.
≥ The indicated charging time is for when the battery has been discharged completely. 
Charging time and recordable time vary depending on the usage conditions such as 
high/low temperature.
≥The actual recordable time refers to the recordable time when repeatedly starting/stopping 
recording, turning the unit on/off, moving the zoom lever etc.
≥ The batteries heat up after use or charging. This is not a malfunction.
Battery model number
[Voltage/Capacity  (minimum)]Charging timeRecording modeMaximum 
continuously  recordable  timeActual 
recordable  time
Supplied battery/
VW-VBL090 (optional) [3.6 V/895 mAh] 2h10min
(3 h) [1280k
720/60p] 1 h 20 min 40 min
[iFrame]/
[640k 480/60p] 1h35min 45min
VW-VBK180 (optional)
[3.6 V/1790 mAh] 2h50min
(5h20min) [1280k
720/60p] 3 h 1 h 30 min
[iFrame]/
[640k 480/60p] 3h25min 1h45min
VW-VBK360 (optional)
[3.6 V/3580 mAh] 4h45min(10 h)
[1280k
720/60p] 6h5min 3h10min
[iFrame]/
[640k 480/60p] 6h55min 3h35min
Battery capacity indicationThe display changes as the battery capacity reduces. 
#### 
When the charge runs out,   flashes red.
HC-V10&V10M&V11MP9_PC_PU_VQT4C31_mst.book  24 ページ  ２０１２年１月１３日　金曜日　午後８時２分 
						

							25VQT4C31
The unit can record still pictures or motion pictures to an SD card or built-in memory. To 
record to an SD card, read the following.
Cards that you can use with this unit
Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for 
motion picture recording.
* SD Speed Class Rating is the speed standard regarding continuous writing. 
Check via the label on the card, etc.
≥Please confirm the latest information abo ut SD Memory Cards/SDHC Memory Cards/
SDXC Memory Cards that can be used for motion picture recording on the following 
website.
http://panasonic.jp/support/global/cs/e_cam
(This website is in English only.)
≥ Operation of the SD Card 256 MB or less is not guaranteed. Also, the SD Card 32 MB or 
less cannot be used for the motion picture recording.
≥ Memory cards of 4 GB or more that do not have the SDHC logo, or memory cards of 48 GB 
or more that do not have the SDXC logo are not based on SD Memory Card Specifications.
≥ The operation of memory cards exceeding 64 GB cannot be guaranteed.
≥ When the write-protect switch  A on SD card is locked, no recording, 
deletion or editing will be possible on the card.
≥ Keep the memory card out of reach of children to prevent swallowing.
Preparation
Recording to a card
This unit (an SDXC compatible device) is  compatible with SD Memory Cards, SDHC 
Memory Cards and SDXC Memory Cards.  When using an SDHC Memory Card/SDXC 
Memory Card with other equipment, check the equipment is compatible with these 
Memory Cards.
Card typeCapacity
SD Memory Card 512 MB/1 GB/2 GB
SDHC Memory Card 4GB/6GB/8GB/12GB/16GB/24GB/32GB
SDXC Memory Card48 GB/64 GB
e.g.:
32
HC-V10&V10M&V11MP9_PC_PU_VQT4C31_mst.book  25 ページ  ２０１２年１月１３日　金曜日　午後８時２分 
						

							26VQT4C31
Inserting/removing an SD card
Caution:
Check that the access lamp has gone off.
1Open the LCD monitor.
2Open the SD card cover and 
insert/remove the SD card into 
/from the card slot B.
≥Face the label side  C in the direction 
shown in the illustration and press it 
straight in as far as it will go.
≥ Press the center of the SD card and then 
pull it straight out.
3Securely close the SD card 
cover.
≥Securely close it until it clicks.
≥Do not touch the terminals on the back of 
the SD card.
≥ Do not apply strong shocks, bend, or drop 
the SD card.
≥ Electrical noise, static electricity or the 
failure of this unit or the SD card may 
damage or erase the data stored on the 
SD card.
≥ When the card access lamp is lit, do not:
jRemove the SD card
j Turn the unit off
j Insert and remove the USB cable
j Expose the unit to vibrations or shock
Performing the above while the lamp is on 
may result in damage to data/SD card or 
this unit.
≥ Do not expose the terminals of the SD 
card to water, dirt or dust. ≥Do not place SD cards in the following areas:j
In direct sunlight
j In very dusty or humid areas
j Near a heater
j Locations susceptible to significant 
difference in temperature (condensation 
can occur.)
j Where static electricity or 
electromagnetic waves occur
≥ To protect SD cards, return them to their 
cases when you are not using them.
≥ About disposing of or giving away the SD 
card. ( l103)
When using an SD card not from Panasonic, 
or one previously used on other equipment, 
for the first time on this unit, format the SD card. ( l45) When the SD card is formatted, all 
of the recorded data is deleted. Once the data is deleted, it cannot be restored.



Access lamp [ACCESS]  A≥When this unit is accessing the SD 
card or built-in memory, the access 
lamp lights up.
HC-V10&V10M&V11MP9_PC_PU_VQT4C31_mst.book  26 ページ  ２０１２年１月１３日　金曜日　午後８時２分 
						

							27VQT4C31
You can turn the unit on and off using the power button or by opening and closing the LCD 
monitor.
Open the LCD monitor and press the power button to turn on the unit.
AThe status indicator lights on.
Unit is turned on when the LCD monitor is opened, and unit is turned off when it is closed.
During normal use, opening and closing of the LCD monitor can be conveniently used 
to turn the unit on/off.
∫ To turn on the unit
A The status indicator  lights on.
∫ To turn off the unit
B The status indicator goes off.
≥ The unit will not turn off while recording motion  pictures even if the LCD monitor is closed.
≥ In the following cases, opening the LCD monitor does not turn on the unit. Press the power 
button to turn on the unit.
jWhen the unit is  originally purchased
j When you have turned off the unit using the power button
Preparation
Turning the unit on/off
Turning the unit on and off with the power button
Turning the unit on and off with the LCD monitor
To turn off the unit
Hold down the power button until the status 
indicator goes off.

HC-V10&V10M&V11MP9_PC_PU_VQT4C31_mst.book  27 ページ  ２０１２年１月１３日　金曜日　午後８時２分 
						

							28VQT4C31
Change the mode to recording or playback.
Operate the mode switch to change the mode to   or  .
Preparation
Selecting a mode
Recording Mode (l32, 34)
Playback Mode ( l37, 63)
HC-V10&V10M&V11MP9_PC_PU_VQT4C31_mst.book  28 ページ  ２０１２年１月１３日　金曜日　午後８時２分 
						

							29VQT4C31
When the unit is turned on for the first time, a message asking you to set the date and time 
will appear.
Select [YES] and perform 
St e ps 2 to 3 below to set the date and time.
¬Change the mode to  .
1Select the menu. ( l40)
2Select the date or time using  2/1 and set the desired value using 
3/ 4.
A Displaying the World time setting 
(l 41):
[HOME]/ [DESTINATION]
≥ The year can be set between 2000 and 
2039.
≥ The 12-hour system is used to display the 
time.
3Press the ENTER button.≥A message prompting for World Time setting may be displayed. Perform the World Time 
setting by pressing the ENTER button. ( l41)
≥ Press the MENU button to complete the setting.
≥The date and time function is driven by a built-in lithium battery.
≥ If the time display becomes [- -], the built-in lithium battery needs to be charged.  To  
recharge the built-in lithium battery, connect t he AC adaptor or attach the battery to this 
unit. Leave the unit as it is for approx. 24 hours and the battery will maintain the date and 
time for approx. 4 months. (The battery is still being recharged even if the unit is off.)
Preparation
Setting date and time
: [SETUP] #  [CLOCK SET]
HC-V10&V10M&V11MP9_PC_PU_VQT4C31_mst.book  29 ページ  ２０１２年１月１３日　金曜日　午後８時２分 
						

							30VQT4C31
∫Basic camera positioning
1 Hold the unit with both hands.
2 Put your hand through the grip belt.
≥ When recording, make sure your footing is stable and there is no danger of colliding with 
another person or object.
≥ When you are outdoors, record pictures with the sunlight behind you. If the subject is 
backlit, it will become dark in the recording.
≥ Keep your arms near your body and separate your legs for better balance.
≥ Do not cover the microphones with your hand etc.
∫ Basic motion picture recording
≥The unit should normally be held steady when recording.
≥ If you move the unit when recording, do so slowly, maintaining a constant speed.
≥ The zoom operation is useful for recording subjects you cannot get close to, but overuse of 
zoom in and zoom out can make the resulting motion picture less enjoyable to watch.
∫ Recording yourself
Rotate the LCD monitor towards the lens side.
≥ The image is horizontally flipped as if you see a mirror 
image. (However the image recorded is the same as a 
normal recording.)
≥ Only some indications will appear on the screen. When 
 appears, return the direction of the LCD monitor to 
normal position and check the warning/alarm indication. 
( l 95)
Basic
Before recording
HC-V10&V10M&V11MP9_PC_PU_VQT4C31_mst.book  30 ページ  ２０１２年１月１３日　金曜日　午後８時２分