Panasonic GT50 Tv Users Manual

							Support / FAQ
FAQ
3D  - Viewing
QuestionsAnswers
Why doesnt  my 3D video
source  look 3D?1. Begin playing the 3D video source.
2. Ensure that the Panasonic 3D Eyewear (glasses)
are  on.
3. Press 
3D
 button directly or press  VIERA
TOOLS  button and select 3D .
4. In the 3D  format select  menu, select 3D.
Notes:
1. 3D Blu -ray discs must be played  with a 3D capable
Blu -ray player.
2. Check with your  Cable or Satellite provider to make
sure  their  supplied box is 3D capable.
3. 3D signal must be connected to the TV via an HDMI
cable.
4. Use Panasonic 3D Eyewear supporting Bluetooth
wireless technology.
Can I use 3D glasses similar
to the kind given at a 3D
movie theater to watch 3D
content on my 3D TV?
No. Movie theaters 3D glasses are  passive. They
use a simple filter lens. Panasonic active shutter 3D
Eyewear are  actively synchronizing the left/right eye
viewing with the display, providing a superior 3D
viewing experience.
201  
						

							Support / FAQ
FAQ
3D  - Format
QuestionsAnswers
When selecting  some  3D
Video content, why are  there
two pictures  next to each
other?
There are  a few different 3D formats and the
current setting  may not match the incoming  3D signal.
The format should  change automatically, but
depending on the source/connection it may not signal
the TV properly. To manually  select other 3D formats:
1. Press 
3D  button directly or press  VIERA
TOOLS  
button on the TVs remote control  and select 3D
2. In the 3D  format select  menu, choose another
3D format such as Side by side  or Top and
bottom .
3. Remember  to switch the 3D format setting  back to
2D  when you go back to viewing a standard 2D
signal.
Why does the left and right
Sides  of the image seem
reversed?
The 3D format has two different phases. Try  the
other phase:
1. In the main menu, select Setup . Highlight 3D
settings  and press  
.
2. In the 3D  settings  menu, select Left/Right
swap .
202  
						

							Support / FAQ
FAQ
Other
QuestionsAnswers
What is the easiest and best
way to connect  a High-
Definition Cable or Satellite
box to the TV?
Use an HDMI cable. It carries  both  digital video and
audio  signal in HD. HDMI cable is the only cable
needed to connect  an HD  device to the TV.
Why does the 
CC  button
not display Closed caption?When viewing TV via an HDMI connected device,
such as a Cable or Satellite box, CC  must be enabled
on the device.
Closed caption is available  only at supported  TV
programming.
Why does the screen  and
back cover  of the TV get
warm ?
The main unit radiates heat  and some  of the parts
may become hot. This is normal operation and does
not affect  the performance of the set.
Ensure good ventilation.
Do not block the ventilation  holes of the TV and do
not place the TV on top of other equipment.
203  
						

							Support / FAQ
FAQ
Menu  - Gray-out
QuestionsAnswers
Why is the ANT/Cable
option at the top of the
Input select  menu
grayed-out and unable  to be
selected?
During   First time  setup , you indicated  in
ANT/Cable setup  that you are  using Cable or
Satellite box and the box is connected to one of the
TVs AV inputs.  In this case, the Antenna/Cable input
is deactivated to prevent unintentional switching into
unused tuner. To re-activate, press  
MENU , select
Setup  and repeat First time  setup .
Some menu  items are
grayed-out and unable  to be
selected.  Why?
Depending on certain  modes  or the selected input,
some  options are  not available. For example, Zoom
adjustments  are  only available  when the Screen
format  is changed to ZOOM  mode.
204  
						

							Support / FAQ
FAQ
Reset to default
QuestionsAnswers
How  do I reset my TV to all
factory  defaults  and
settings ?
In the main menu, select Setup . Highlight Reset
to defaults  and press  
. Enter your  password (if
created earlier) or create a temporary  new password.
Select  Yes to reset the TV.
205  
						

							Support / FAQ
Care and Cleaning
Display panel
First, unplug the Power  cord  plug from the wall outlet.
Display panel
The front  of the display panel  has been specially treated. Wipe the panel  surface
gently using only a cleaning cloth or a soft, lint-free cloth.
If the surface is particularly dirty, after  cleaning up the dust, soak a soft, lint-free
cloth in diluted  mild liquid dish soap (1 part mild liquid dish soap diluted  by 100
times the amount of water) and then  wring the cloth to remove excess liquid. Use
this cloth to wipe the surface of the display panel, then  wipe it evenly with a dry
cloth of the same  type until the surface is dry.
Do not scratch or hit the surface of the panel  with fingernails or other hard  objects.
Furthermore, avoid contact with volatile substances such as insect sprays,
solvents,  and thinner, otherwise, the quality of the surface may be adversely
affected.
206  
						

							Support / FAQ
Care and Cleaning
Cabinet
First, unplug the Power  cord  plug from the wall outlet.
Cabinet
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
If the cabinet is particularly dirty, soak the cloth in a weak mild liquid dish soap and
then  wring the cloth dry. Use this cloth to wipe the cabinet and then  wipe it dry with
a dry cloth.
Do not allow any mild liquid dish soap to come  into direct  contact with the surface
of the TV. If water  droplets get inside the unit, operating problems may result.
Avoid  contact with volatile substances such as insect sprays, solvents,  and thinner,
otherwise, the quality of the cabinet surface may be adversely affected or the
coating may peel off.
Do not let articles made  from rubber or PVC be in contact with the TV for long
periods of time.
207  
						

							Support / FAQ
Care and Cleaning
Pedestal  /  Power cord
First, unplug the Power  cord  plug from the wall outlet.
Pedestal
Cleaning
Wipe the surfaces with a soft, dry cloth. If the unit is particularly dirty, clean it using
a cloth soaked with water  to which a small amount of mild liquid dish soap has
been added and then  wipe with a dry cloth. Do not use products such as solvents,
thinner, or household wax for cleaning,  as they can damage the surface coating.  (If
using a chemically-treated cloth, follow the instructions supplied with the cloth.)
Do not attach sticky tape  or labels, as they can make  the surface of the pedestal
dirty. Do not allow long-term contact with rubber, vinyl  products, or the like. (Doing
so will cause deterioration.)
Power  cord
Wipe the plug with a dry cloth at regular intervals.  (Moisture and dust can lead to
fire or electrical  shock.)
208