Panasonic GT50 Tv Users Manual

All settings
Picture
Aspect  adjustments
 MENU   Menu  > Picture  > Aspect adjustments
Settings OptionsDescription
Screen format FULL/H -FILL/
JUST/4:3/
ZOOM
Changes  the format (aspect ratio). Lets you
choose the aspect  depending on the format of
received signal.
HD  size
Size  1 /Size 2Selects between 95 % (Size 1) or 100 % 
(Size 2) for the scanning  area  with High Definition
signal.
H size
Size  1 /Size 2Adjusts the horizontal display range to reduce
noise of both  side edges of an image.
Size  2:...

All settings
Picture
PC adjustments (1)
 MENU   Menu > Picture  > PC adjustments
Settings OptionsDescription
Reset to
defaults
 Resets all  PC adjustments to factory  default
settings.
Sync H & V
The H and V sync signals are  input from the
HD/VD connector.
On green
Uses a synchronized signal on the Video G
signal, which is input from the G connector.
Dot clock
 Alleviates the problem if a picture  appears to
be vertically-striped, flickers partially  or is blurred.
H-position
 Adjusts the horizontal...

All settings
Picture
PC adjustments (2)
 MENU   Menu > Picture  > PC adjustments
Settings OptionsDescription
Clock  phase
 Alleviates the problem if the whole picture
appears to flicker or is blurred. First  adjust the Dot
Clock  to get the best possible picture, then  adjust
the Clock  phase so that a clear picture  appears. 
It may not be possible to display a clear picture
due to poor  input signals.
Input
resolution
 Switches  to wide display and selects the
appropriate screen  resolution. 
VGA (640...

All settings
Picture
HDMI settings
 MENU   Menu  > Picture  > HDMI  settings
Settings OptionsDescription
HDMI/DVI 
RGB range 
(HDMI)
Auto /
Standard
(16 -235)/
NonstandardPrevents  the blown out highlights and blocked
up shadows  when a wide-range signal is received.
Selects between standard RGB range (16 -235
bits) or non-compliance (0-255 bits).
  Auto: Switches  the RGB range (Standard 
(16 -235)/Nonstandard) depending on the HDMI
signal information.
Content  type
(HDMI)
Off /Auto/
Photos/...

All settings
Picture
Advanced  picture (1)
 MENU   Menu  > Picture  > Advanced picture
Settings OptionsDescription
3D Y/C filter Off/On
Minimizes  rough edges (dot crawl) in the
picture  from a composite source.
Color matrix SD/HD
Selects image resolution of component -
connected devices.
  SD: Standard Definition HD: High Definition
  Only used with 480p video signal.
Block  NR Off/On/Auto
Reduces  noise of specific digital signals of
DVD, Cable box, etc.
Mosquito NR Off/On
Reduces  HDTV flicker noise...

All settings
Picture
Advanced  picture (2)
 MENU   Menu  > Picture  > Advanced picture
Settings OptionsDescription
Black  level Light/Dark
Select Dark when details are  washed  out in
dark  areas  of picture  from external source. Valid
only for external input signals.
3:2 pulldown Off/On/Auto
Reduces  motion  jitter in film-based content by
transforming 24 fps to 30 fps (non -HDMI).
24p Direct in 60Hz/48Hz48Hz: Achieves more cinematic playback  by
reproducing the movie contents at twice the
speed of 24...

All settings
Audio
Setting menu
Adjust audio  quality.
1.Display the menu
 MENU  Menu
2.Select  Audio from menu  bar
Select desired menu  using 
/ from menu  bar  and press  
3.Select the item  and  adjust Select desired item using 
/ and adjust with /
* Shows  the functions  that can be adjusted.
* Some functions  will be disabled depending on the type of input signal.
Reset to defaults  will be grayed out if no changes are  made.
157  

All settings
Audio
Basic  settings
 MENU   Menu  > Audio
Settings OptionsDescription
Reset to
defaults
 Resets Bass,  Treble, and Balance adjustments
to factory  default  settings.
Bass
 Increases or decreases the bass response.
Treble
 Increases or decreases the treble  response.
Balance
 Emphasizes  the left / right  speaker volume.
158  

All settings
Audio
Advanced  audio
 MENU    Menu  > Audio  > Advanced audio
Settings OptionsDescription
A.I.  sound Off/On
Equalizes overall  volume levels across  all
channels  and external inputs.
Surround Off/On
Enhances  audio  L/R response when listening
to stereo. Ideal for music and action movies.
Volume leveler Minimizes  volume disparity after  switching to
external inputs.
Distance to
wall Over 1ft(30cm)/
Up to 1ft(30cm)Over 1ft(30cm):  TV is on a stand. Keeps
current setup.
Up to 1ft(30cm):...

All settings
Audio
DTV  language  and  SAP settings
 MENU  Menu > Audio  > DTV language  and  SAP settings
Settings OptionsDescription
Preferred
language
English /
Spanish/
French Selected preferred language is used for automatic
selection  of audio  service.
Preferred audio
type
Main Audio /
Hearing
Impaired/
Visually
Impaired Selected preferred audio  type is used for
automatic selection  of audio  service.
160