Panasonic GT50 Series Tv User Manual

							All settings
Setup
ANT/Cable  setup  (2)
 MENU   Menu  > Setup  > ANT/Cable setup
Settings OptionsDescription
Signal meter
 Check the signal strength if interference is
found  or freezing occurs  on a digital image.
If the signal is weak, check the antenna.
If you cannot  figure  out the problem, consult your
local dealer.
Not available  if Cable  is selected in ANT in
Available only for digital antenna channels.
181  
						

							All settings
Setup
Anti Image  retention
 MENU   Menu  > Setup  > Anti image retention
Settings OptionsDescription
Pixel orbiter Disable/
EnableEnable: Shifts  the display image automatically.
4:3 side bars
(4:3 mode  only) Off/Dark/Mid/
Bright
Changes  the brightness of the side bar
The recommended setting  is Bright  to prevent
the panel  Image  retention.
Do not display a picture  in 4:3 mode  for an
extended period, as this can cause Image
retention to remain on either  or both  sides of the
display field. To reduce the risk of such Image
retention, change the brightness of the side bars.
The side bar  may flash (alternate black/white)
depending on the picture.
Scrolling bar
 Press OK to start  the horizontal Scrolling on
the screen. Press any key except  the POWER key
to return to previous screen. You will return to the
previous screen  if no key operation has been
performed for 15 minutes.
182  
						

							All settings
Setup
Closed  caption  (1)
 MENU  Menu  > Setup  > Closed caption
Settings OptionsDescription
Reset to
defaults
 Resets all  Closed caption settings  to factory
default  settings.
Mode
Off /On/
CC  on muteOn: To display Closed captions.
CC  on mute:  To display Closed captions when
the audio  is muted. (When  not using, select Off ).
Analog
CC1 -4/T1 -4Choose  the Closed caption service of Analog
broadcasting.
CC1 -4: Information  related to pictures
(Appears at the bottom of the screen)
T1-4: Textual information  (Appears over  the
entire  screen)
183  
						

							All settings
Setup
Closed  caption  (2)
 MENU  Menu  > Setup  > Closed caption
Settings OptionsDescription
Digital
Primary /
Second./
Service 3/4/5/6The Digital Closed caption menu  lets you
configure the way you choose to view  the digital
captioning.
Digital setting
(Set display
settings  in
digital
programs.) Size
Select the text size
Font
Select the text font
Style
Select the text style (Raised, Depressed, etc.)
Foreground
Select the color of text
Fore. opacity
Select the opacity of text
Background
Select the color of text box
Back.  opacity
Select the opacity of text box
Outline
Select the outline  color of text (Identify the
setting  options on the screen).
184  
						

							All settings
Setup
Closed  caption  notice
For viewing the CC  of digital broadcasting,  set the aspect  to FULL  (If viewing with
H-FILL, JUST, ZOOM or 4:3, characters might  be cut off).
The CC  can be displayed on the TV only when the receiver (such  as a Cable box
or satellite receiver) has the CC  set to ON within the device itself. Check with your
Cable or Satellite provider for instructions. The TVs CC  button does not operate
the Satellite or Cable boxs CC  function.
If the CC  is set to ON on both  the receiver and TV when the signal is 480i (except
for the HDMI connection),  the CC  may overlap on the TV.
If a digital program is being  output in analog  format, the CC  data  will also be output
in analog  format.
If the recorder or output monitor is connected to the TV, the CC  needs to be set up
on the recorder or output monitor.
185  
						

							All settings
Setup
VIERA  Link  settings (1)
 MENU   Menu  > Setup  > VIERA  Link settings
Settings OptionsDescription
VIERA  Link Off/
OnTo use all  VIERA  Link functions, set to On
after  everything is connected.
Power on link
No /YesYes:  The TV is turned on automatically and
switches to the appropriate HDMI input whenever
VIERA  Link compatible equipment is initially
turned on and the Play  mode  is selected.
Power off link No/
YesWhen Yes is selected and the TV is turned
off, all  connected VIERA  Link compatible
equipment is also automatically turned off.
  The TV remains on even if the VIERA  Link 
  compatible
  equipment is turned off.
186  
						

							All settings
Setup
VIERA  Link  settings (2)
 MENU   Menu  > Setup  > VIERA  Link settings
Settings OptionsDescription
Energy saving
mode
Quick start /
SaveQuick Start : When TV is turned off, all
connected VIERA  Link compatible equipment is
moved  to ECO Standby mode* automatically
under these  conditions.
  Power off link:(Yes).  The connected
equipment has HDAVI Control 4 or later  (with
Quick Start mode)
* Minimum power consumption of Standby
condition  for the equipment.
Unselected
device energy
save
No (stay on) /
Yes 
(with prompt)/
Yes 
(no  prompt)Yes : The connected VIERA  Link compatible
equipment will be turned off automatically when 
not in use under these  conditions.
  The connected equipment has HDAVI
Control 2 or later (for available  equipment only)
Default
speakers
TV /TheaterTV is the default  setting. To set the Home
theater system as Default speakers, change the
Default speakers setting  from TV to Theater .
Sound will be output from the Home Theater
whenever the TV is powered on.
187  
						

							All settings
Setup
ECO/energy  saving  (1)
 MENU   Menu  > Setup  > ECO/energy saving
Settings OptionsDescription
Power save
Standard /
SavingReduces  screen  brightness to lower power
consumption.  Eye-friendly for viewing in a dark
room.
No signal for 
10 minutes Stay  on/
Power TV off
To conserve energy, the TV automatically turns
off when NO SIGNAL and NO OPERATION
continue for more than  10 minutes.
  Not in use when Auto power on is set to
Yes, or On/Off Timer is set.
  No  signal for 10 minutes  was activated will
be displayed for about  10 seconds when the TV is
turned on for the first time after  the power was
turned off by No  signal for 10 minutes feature.
The on-screen  display will flash 3, 2 and 1 to
indicate  the last three (3) remaining minutes  prior
to the shut-off.
188  
						

							All settings
Setup
ECO/energy  saving  (2)
 MENU   Menu  > Setup  > ECO/energy saving
Settings OptionsDescription
No activity for 
3 hoursStay  on/
Power TV offTo conserve energy, the TV automatically turns
off when no operation of remote and side panel
key continues for more than  3 hours.
  Not in use when Auto power on is set to
Yes, or On/Off Timer is set, or while PC
inputs is selected.
  No  activity for 3 hours  was activated will be
displayed for about  10 seconds when the TV is
turned on for the first time after  the power was
turned off by No  activity for 3 hours feature.
  The on-screen  display will flash 3, 2 and 1 to
indicate  the last three (3) remaining minutes  prior
to the shut-off.
189  
						

							All settings
Setup
Advanced  setup
 MENU   Menu  > Setup  > Advanced setup
Settings OptionsDescription
Auto power on
No /YesTurns TV On automatically when the cable box
or connected device is turned On.
TV AC cord  must be plugged into this device.
TV turns on every  time the power is restored.
Image viewer 
auto  play Slideshow/
Photos/
Videos/Music/
Set  later
/Off
Sets  the media contents or playback  type to
playback  SD cards  automatically.
Set  later: Image viewer settings  menu  will
be displayed repeatedly.
VIERA
Connect
Banner Off/
OnSets  the banner display status.
Channel
transition effectOn
/OffSet  to Off  to disable transition effect  during
tuning the channel.
190