Panasonic Gh5 Manual

281
10. Using the Wi-Fi/Bluetooth function
Preparations:
The following conditions are required to use Auto Cloud Backup:
• Set the camera to a state in which it can be turned on with the smartphone (standby state). 
(P274)
– Camera: [Bluetooth] and [Remote Wakeup] are set to [ON].
– Camera: The Camera On/Off switch is set to [OFF].
• Camera: The card’s Write-Protect switch is not set to [LOCK].
Start up the “ Image App ” in foreground (a state in which the ap p can be operated), 
and run a backup.
• A...

10. Using the Wi-Fi/Bluetooth function
282
The smartphone sends its location information to the camera via Bluetooth, and the 
camera performs recording while writing the acquired location i nformation.
Preparations:
Enable the GPS function on the smartphone.
1Make a Bluetooth connection to the smartphone.  (P268)2Select the camera’s menu. (P55)
• The camera will enter a mode where location information can be  recorded and [ ] will 
be displayed on the recording screen.
3Take pictures on the camera.•...

283
10. Using the Wi-Fi/Bluetooth function
Synchronize the clock and the time zone setting of the camera with those of a 
smartphone.
1Make a Bluetooth connection to the smartphone.  (P268)
2Select the camera’s menu. (P55)
• The [Clock Set] setting and the [Home] or [Destination] settin g in [World Time], which are 
all located in the [Setup] menu, will be synchronized with the  corresponding settings of the 
smartphone.
• To disable the automatic synchronization of the clock, set [Au to Clock Set] to...

10. Using the Wi-Fi/Bluetooth function
284
Displaying pictures on a TV
You can display pictures on a TV that supports the Digital Media Renderer (DMR) function 
of the DLNA standard.
Preparations:
Set the TV to DLNA waiting mode.
• Read the operating instructions for your TV.
1Select the menu.  (P55)
2Select [Via Network] or [Direct], and connect.  (P299)
3Select a device you want to connect.• When the connection is established, the screen is displayed.
4Play back pictures on this unit.• To terminate the...

285
10. Using the Wi-Fi/Bluetooth function
Sending images
When sending images, select the method for sending them 
after selecting [New Connection] in [Wi-Fi Function] in [Wi-Fi] 
in the [Setup] menu.
∫ Images that can be sent
¢1 Sending by [Send Images While Recording] is not available.
¢ 2 A motion picture recorded in [AVCHD] can be sent to [PC] if th e file size is 4 GB or smaller. It 
cannot be sent if the size is greater than 4 GB.
¢ 3 Excluding motion pictures recorded with their size set to [4K]...

10. Using the Wi-Fi/Bluetooth function
286
Images can be selected and sent after recording.
Pressing [DISP.] after completing a connection allows you to change the settings for 
sending such as the image size for sending.
Send Images Stored in the Camera
[Single Select] setting
1Select the picture.2Select [Set].
[Multi Select] setting
1Select the picture.  (repeat)• The setting is canceled when the picture is selected 
again.
• Pictures are displayed separately by card slot. You can  switch the displayed...

287
10. Using the Wi-Fi/Bluetooth function
Sending images to a smartphone/tablet
Preparations:• Install the “ Image App ” in advance. (P267)
1Select the menu. (P55)
2Select [Via Network] or [Direct], and connect.  (P299)
3Select a device you want to connect.4Check the send settings, and select [Set].• To change the send setting, press [DISP.]. (P286)
> [Setup]  > [Wi-Fi]  > [Wi-Fi Function]  > [New Connection]  > 
[Send Images While Recording] or [Send Images Stored in the Cam era] > 
[Smartphone]
On...

10. Using the Wi-Fi/Bluetooth function
288
Printing Wirelessly
You can print pictures on printers that support PictBridge (wir eless LAN)¢.¢Compliant with the DPS over IP standards.
• For details on the PictBridge (wireless LAN-compatible) printe r, contact the respective 
company.
1Select the menu.  (P55)
2Select [Via Network] or [Direct], and connect.  (P299)3Select a printer you want to connect.
4Select pictures, and then print.• The procedure for selecting pictures is the same as the one fo r when...

289
10. Using the Wi-Fi/Bluetooth function
Sending images to AV device
You can send pictures and motion pictures to AV devices in your house (home AV 
devices).
Preparations:
When sending a picture to AV devices, set your device to DLNA waiting mode.
• Read the operating instructions of your device for details.
1Select the menu.  (P55)
2Select [Via Network] or [Direct], and connect.  (P299)
3Select a device you want to connect.4Check the send settings, and select [Set].• To change the send setting, press...

10. Using the Wi-Fi/Bluetooth function
290
Sending images to PC
Preparations:• Turn the computer on.
• Prepare folders for receiving images on the PC.  (P290)
• If the workgroup of the destination PC has been changed from t he standard setting, change the 
setting of this unit in [PC Connection].  (P305)
• Create a PC account name (up to 254 characters) and password (u p to 32 characters) 
consisting of alphanumeric characters. An attempt to create a r eceive folder may fail if the 
account name includes...