Panasonic Gh5 Manual

121
5. 6K/4K Photo and Drive Settings
∫The camera’s setup for the 6K/4K Photo function
The camera’s setup is automatically optimized for 6K/4K photo r ecording.
• The following [Rec] menu items are fixed to the settings below:
• 6K/4K burst files are recorded with the settings indicated bel ow:
Settings in the [Motion Picture] menu are not applied to 6K/4K  burst files.
¢ Switches to a setting that matches the [Picture size / Burst sp eed] setting.
• When recording with the 6K/4K Photo function, the...

5. 6K/4K Photo and Drive Settings
122
• When [6K 18M] is set, [Aspect Ratio] cannot be set to [16:9] or [1:1].
• The following changes occur when recording 6K/4K photos: – [Location] in [Travel Date] cannot be recorded.
– [Simultaneous record w/o filter] in [Filter Settings] is not available.
– It is not possible to use the HDMI output during recording.
• If you use HDMI output, settings will be adjusted as follows:
– [6K/4K Pre-Burst] will be switched to [6K/4K Burst].
– The [Pre-Burst Recording]...

123
5. 6K/4K Photo and Drive Settings
Selecting pictures from 6K/4K burst file and 
saving
This section describes how to select pictures from a 6K/4K burst file and save them.
For information on how to record 6K/4K burst files, refer to  P116.
1Select an image with the [ ] or [ ] icon on the playback 
screen, and press  3.
• You can also perform the same operation by touching the icon [ ] or 
[].
• If the image was recorded with [6K/4K Pre-Burst], proceed to s tep 
3.
3Drag the frames to select the frame...

5. 6K/4K Photo and Drive Settings
124
∫Correcting distortion in pictures ([Reduce Rolling Shutter])
The camera corrects distortion in pictures caused by the electr onic shutter (rolling shutter 
effect) when you save them.
1On the save confirmation screen in step 4 on  P123 , touch [Reduce Rolling 
Shutter].
• Return to the confirmation screen if it cannot produce any cor rection result.
2Check the correction result, and touch [Save].• You can check corrected/uncorrected versions of the picture by...

125
5. 6K/4K Photo and Drive Settings
∫Navigating the slide view screen
• During marker operation, you can skip to the markers that you  added or the beginning or end of 
the 6K/4K burst file. Press [Fn2] again to return to the origin al operation.
Operations during selecting pictures/Selecting pictures on the  TV 
screen
Button 
operationTouch 
operationDescription of operation
2/ 1/Dragging/
/ Selects a frame.
• If you select the frame at the left/right end and then select 
another frame...

5. 6K/4K Photo and Drive Settings
126
∫Navigating the 6K/4K burst playback screen
During pause During continuous playback
Button 
operationTouch 
operationDescription of operation
3/ Continuous playback/Pause (during continuous playback).
4/ Continuous rewind/Pause (during continuous rewind).
1 // Fast forward/Frame-by-frame forward (during pause).
2// Fast rewind/Frame-by-frame rewind (during pause).
sTouching/
Dragging Selects the frames to be displayed (during pause).
Pinching out/in Enlarges/reduces...

127
5. 6K/4K Photo and Drive Settings
∫Selecting and saving pictures on the TV screen• 6K burst files recorded with [6K 18M] are output to a TV conne cted through HDMI at a 
resolution of [4K].
• Set [HDMI Mode (Play)] to either [AUTO] or a setting with a re solution of [4K].
When connecting to a TV that does not support 4K motion picture , select [AUTO].
• Set [VIERA Link] in [TV Connection] to [OFF].
• If you display 6K/4K burst files on a TV connected to the came ra, they will be displayed only on...

5. 6K/4K Photo and Drive Settings
128
Controlling Focus After Recording (Post Focus/
Focus Stacking)
Applicable modes: 
The camera can perform Burst recording in the same picture quality as 6K/4K photo 
recording while automatically shifting the focus to different a reas.
With Post Focus, after recording is finished, you can select th e desired points on the 
screen and save pictures in which the selected points are in fo cus.
With Focus Stacking, you can also merge multiple pictures with  different...

129
5. 6K/4K Photo and Drive Settings
4Decide on the composition, and press the shutter 
button halfway.
• Auto Focus will detect focus areas on the screen. (Excluding the edges of the screen)
• If no areas on the screen can be brought into focus, the 
focus display ( A
) will flash. Recording is not possible in this case.
5Press the shutter button fully to start recording.• The focus point changes automatically while recording. 
When the icon ( B
) disappears, recording automatically 
ends.
• A motion...

5. 6K/4K Photo and Drive Settings
130
1Select an image with the [ ] icon on the playback screen, and 
press 3.
• You can also perform the same operation by touching the icon [ ].
2Touch the desired focus area.• If a picture that is in focus is not available for the selected 
area, a red frame will be disp layed. You cannot save a 
picture in this case.
• You cannot select the edges of the screen.
• You can fine-adjust the focus by dragging the slide bar  during enlarged display. (You can also perform the...