Panasonic Full Hd Lcd Display Th 50lfc70 Operating Instructions

							21
DIGITAL LINK status
Display the DIGITAL LINK connection environment.
Select “DIGITAL LINK status” in [Network Settings] 
menu, an
d press.
DIGITAL LINK status
LINK status
HDMI status
Signal Quality
      Minimum
      MaximumNo Link
 No HDMI
-XX dB
-YY dB
LINK status  :  Either “No link”, “DIGITAL LINK”, or “Ethernet” will be displayed.
No link  : No LAN connection, etc.
DIGITAL LINK  : Connected to the DIGITAL LINK device by LAN
Ethernet :  The PC is connected to the DIGITAL LINK terminal of this product and is
LAN connecte
d
HDMI status  :  Either “No HDMI”, “HDMI ON”, or “HDCP ON” will be displayed.
No HDMI  : DIGITAL LINK not connected
HDMI ON : DIGITAL LINK connected
HDCP ON  :  A signal with an HDCP is  owing with a DIGITAL LINK connection.
Signal quality :  It is the quanti ed minimum and maximum numbers of errors that have occurred. The display 
colors are red, yellow, or green, depending on the number.
The number is represented by yellow or red if the LAN cable is disconnected or the cable is 
not shielded. This si
gnal quality shows  gures between the twisted pair cable transmitter that is
connected and the display.
Signal Quality Display Colors Reception Status
-
12dB or belowGreen The reception is normal
-11 to -
8dB Yellow Part of the received 
data is corrupted
-7
dB or aboveRedThere are reception
di
f culties
Digital Interface Box
 A switch will be made to the Set up Digital Interface Box menu when “Digital Interface Box” in [Network Settings] 
menu is selected and  is pressed.
This function can onl
y be selected when the Digital Interface Box (ET-YFB100G) made by our company is connected
to a 
LAN terminal and its power is on.
Network Settings
Live mode Cut In
Set this [ON] to allow interrupt of the Live mode by other users while the Live mode is active (sending image) by the
“Wireless Manager”. For details, refer to “Wireless Manager” operating manual.
Select [Live mode Cut In] in [Network Settings] menu and press1button.
Select [On] or [Off ].2  
						

							22
Reset
You can reset the network setting to the factory default of the Display.
Select [Reset] in [Network Settings] menu and press 1button.
Ye sNo
Reset
Network Settings
Select [Yes] and press 2.
It takes some time to restart network while the network settings are initialized.
During that time, “Network Settings” in the “Setup” menu is grayed out and cannot be set.
Extron XTP
To carry out connection settings with XTP Transmitter made by Extron. Visit the following website for details.
http://www.extron.com
Network Settings
DIGITAL LINK mode
You can switch the setting of DIGITAL LINK /LAN terminal.
LAN: Enables LAN communication via the Display's LAN terminal.
Auto (LAN):  Enables automatic selection between LAN communication via the Display's LAN terminal and HDMI/
LAN communication via the twisted pair cable transmitter.
DIGITAL LINK (LAN): Enables HDMI/LAN communication via the twisted pair cable transmitter.
DIGITAL LINK (RS-232C): Enables HDMI/RS-232C communication via the twisted pair cable transmitter.
To use the control methods shown in pages 24 to 34, select “LAN”, “Auto (LAN)” or “DIGITAL LINK (LAN)”.•
Power consumption during standby is slightly larger if you set to any other setting than “LAN”.• 
						

							23
Connecting with Wired LAN
To use the network function, make the necessary settings in [Network Settings] and be sure to set LAN to enabled
in [Control I/F Select] and [DIGITAL LINK mode]. 
(See page 20)
Computer operation
Connection can be made with wired LAN. However, con rm to your system administrator on network settings 
be
fore changing any settings.
Turn on the computer.1
Make the network setting according to your system administrator.2 If the Display settings are the default settings (See page13), the computer can be used with the following 
networ
k settings.
IP address 192.168.10.101
Subnet mask 255.255.255.0
Gateway192.168.10.1
Computer operation
Make the network setting according to your system administrator.1 If you select [M-DIRECT] for [Wireless LAN] in the [Network Settings] menu, the IP address will•
automatically be acquired.
If you select default settings of [USER1] - [USER3] for [Wireless LAN] in the [Network Settings] menu (see •
page 17), then the computer can be used with the following network settings.
IP address192.168.11.101
Subnet mask 255.255.255.0
Gateway192.168.11.1
Connect to the wireless network that has the same [SSID] set with the Display.2 When you select default settings of [M-DIRECT] for [Wireless LAN] in the [Network Settings] menu, the 
SSID is [M-DIRECT + The last 4 digits of the Display ID].
When 
you select default settings of [USER1] - [USER3] for [Wireless LAN] in the [Network Settings] menu, 
the SSID is [Panasonic Display].
If you use any wireless utility other than Windows [Wireless Network Connection], follow its operation• 
procedure for connection.
If you use the access point, con gure the Display and each network setting of the computer following the •
instruction of the network administrator.
  Connecting with Wireless LAN 
						

							24
Using Web Browser
  Accessing from the Web browser
Activate the Web browser in the personal computer.
1 
Enter the IP address set by the Display into the URL input  eld of the Web browser.2
Enter your “User name” and “Password”.3 
The factory default settings are user1 (user 
privileges) or admin1 (administrator privileges) for the 
user name and panasonic 
for the password.
Click [OK] to display the Display status4 page.
“Display status” page is displayed.
TH-50LFC70
Avoid activating two or more Web browser simultaneously to work out setting or control actions.•
Change the password  rst of all.•
Administrator privileges enable the use of all functions. User privileges enable the use of only “Display status”, •
“Network status”, “Basic control”, “Advanced control”, and “Change password”.
If the password is incorrectly entered three times in a row, the lock is set for several minutes.•
If you want to control the Display using a Web browser, set [WEB Control] in [Network Settings] menu to [On].• 
						

							25
Using Web Browser
   
Display status page
Click [Status], then [Display status] to display the Status information page.
This page displays the Display statuses established for the items shown below.
TH-50LFC70
1 Displays the type of Display.
2 Displays the  rmware version of the Display main
unit.
3  Displays the  rmware version of the network.
3 2 
1 
Description of each item 
TH-50LFC70
1 Page tab
  Click these to switch pages.
2 Status
Click this item, and the status of the Display is 
displa
yed.
3  Display  control
Click this item to display the Display control page.
4  Detailed set up
Click this item to display the advanced settings
page.
5 Change password
6 Click this item to display the Crestron Connected™ 
operation page.
1 
2 
3 
4 
5 
6  
						

							26
Using Web Browser
Network status page
Click [Status], then [Network status] to display the Status information page.
Displays the current con guration information of the network.
1 Displays the con guration details of wireless LAN.
2 Displays the con guration details of wired LAN.
2 
1  
						

							27
Using Web Browser
  Basic control page
To move from another page, click [Display control], then [Basic control].
1 
2 
3 
4 
1 Power On/Off control
2 Use these to select the input signals
3  Operation of AV mute
4  Switches aspect mode
The following points will be different when connected wirelessly.
Switching to Miracast™ and MEMORY VIEWER input will not be possible
.•
Control will not be possible with Crestron Connected™.•
TH-50LFC70U, TH- 65LFC70U, TH-80LFC70U,
TH-50LFC70W, TH- 65LFC70W, TH-80LFC70W
• When [Wireless Network Standby] is off, operation for turning the power on/off will not be shown.
TH-50LFC70E, TH- 65LFC70E, TH-80LFC70E
•
[Wireless Network Standby] function is not supported, and operation for turning the power on/off will not be shown.
   
Detail control page
Click [Display control], then [Advanced control] to display the Detail control page.
1 Enter a command. Use the same command used for the serial control. 
(refer to “Operating Instructions, Display Operations”)
2 Response from the unit is displayed.
3 Command is sent and run.
After the settings are changed, it may take a while till the display status is displayed.
2 
1 
3  
						

							28
Using Web Browser
  Change Password page
Click [Change password].
1
2
1 Administrator
2 User
Administrator mode
1
2
3
4
567
1 Account
2 Current user name input  eld
3 Current password input  eld
4 New user name input  eld
5 New password input  eld
6 New password input  eld (re-enter for con rmation)
7 Button for executing password change
User account
1
2
34
5
1 Account
2 New user name input  eld
3 New password input  eld
4 New password input  eld (re-enter for con rmation)
5 Button for executing password change
User mode
A user can change password only.
1
2
3
4
1 Current password input  eld
2 New password input  eld
3 New password input  eld (re-enter for con rmation)
4 Button for executing password change
When changing the administrator account, both “Current user name” and “Current password” are required. 
						

							29
Using Web Browser
Network con g page
You can make detail network settings on Display, when connecting without the administrator authority or when 
connecting with Wireless LAN.
LAN settings
Click [Detailed set up] in the menu.1
Select the items to change and click [Next].2The settings window appears, showing the current 
settings.
To change the LAN settings, click [Change]
.•
To return to the previous window, click [Back].•
Complete the detailed settings and click3[Next].
When [Next] is clicked, the next page appears, enabling
you to complete the detailed settings as desired.
Settings performed here are the same as the settings
performed with the [Network Settings] menu of the
Display
.
Wired LAN (See page 13)•
Wireless LAN (See page 14)•
After all required items have been entered, a con rmation 
window appears.(Wireless LAN screen) 
						

							30
Using Web Browser
Click [Submit].4
The settings will be registered.
(Wireless LAN screen)
Making the above settings effective (Only for wireless LAN)
Select [Wireless LAN] in [Network Settings] menu of the Display, and select the network set in this page.
Important video/audio data is protected because AES encryption processing takes place.•
Changing the setting of LAN while connected with LAN might disconnect the connection.•
  Adjust clock page
Click [Detailed set up], then [Adjust clock] to display the Adjust clock page.
1
2
3456
7
1 Time zone selection
2 Button to update time zone setting
3 Tu r n  t h i s  [ON] to set the date and 
time automatically.
4 When setting the date and time automatically, input the IP 
address or name of the NTP server. 
(When inputting the server 
name, the DNS server must be set.)
5 New date  eld
6 New time  eld
7 Button to update time and date settings
If the time becomes incorrect immediately after setting the correct time, contact the dealer where you bought the 
Displa
y.