Panasonic Full Hd Lcd Display Th 50lfc70 Operating Instructions

11
Hub or broadband router
Network connections via DIGITAL LINK terminal
A twisted pair cable transmitter such as the Panasonic Digital Interface Box (ET-YFB100G) uses twisted pair cables
to transmit inputted video and audio signals, and these digital signals can be input to the Display via the DIGITAL
LINK terminal.
Installing / Connectinggg
  Ask the dealer or a quali ed technician to carry out the cable wiring work for DIGITAL LINK connections. 
Insuf cient wiring work may cause the inability to...

12
Network Settings
Make the various settings to use the network function.
For network settings, contact your network administrator.
Displaying the Network Settings menu
Press 
1  to display [Setup] menu. 
Setup
MULTI PIP Settings
Network Settings
Memory Viewer Settings
Signal
Screensaver
ECO Mode settings
Input label
Function Button Settings
Day/Time Settings
On/Off Timer Settings
Component/RGB-in select RGB
Monitor Out
Menu Display Duration
OSD Brightness
OSD LanguageOff
30 S
No activity power off...

13
Network Settings
  Wired LAN
You can make detailed wired LAN settings.
Select [Wired LAN] in [Network Settings] menu and press1 button.
Set [DHCP]
.2 When [Off] is selected, IP address and other settings can be set manually.
DHCP
(DHCP client function)
On: If a DHCP server exists in the network to which the display 
is connected, the IP address will automatically be acquired.
Off:If a DHCP server does not exist in the network to which the
displa
y is connected, additionally set [IP address], [Subnet...

14
Network Settings
Wireless LAN
You can make detailed wireless LAN settings. (You cannot select AD HOC mode with this display.)
Setting network number
Select [Wireless LAN] in [Network Settings] menu and press 
1 button.
Select the number to be connected for 
2[Wireless LAN].
[Off], [S-DIRECT], [M-DIRECT], [USER1]-[USER3]•
Selecting [Off ] disables the wireless LAN.•
Network number: [S-DIRECT] is available only when connecting via wireless LAN with the application software •
the “Wireless Manager”. For...

15
Con guration of Wireless LAN [USER1] - [USER3]
Select [USER1] – [USER3] for [Wireless LAN].
1
Wireless LAN
Save
Wireless LAN
Name ChangeUSER1
DHCPOff
IP address192.168.11.100
Subnet mask255.255.255. 0
Gateway192.168.11.1
SSID
Set [DHCP].2When [Off] is selected, IP address and other settings can be set manually.
Name ChangeYou can change the user name. Entering characterspage 18
DHCP
(DHCP client function)
On: If a DHCP server exists in the network to which the display is
connected, the IP address...

16
Network Settings
Press  to go to the next item.3 Make the settings related to the wireless connection between the Display and the network.
SSID
AuthenticationOpen
EncryptionNone
SSID:Enter the SSID registered at the access point.
Enterin
g characters page 18
SSID has to be entered in alphanumeric letters.• 
You cannot set “any” or “ANY” for SSID.• 
Authentication:Set the user authentication method used by the network to be connected.
O
pen:Select when the access point authentication method is...

17
Network Settings
Press  to go to the next item.4 In addition, further perform the following setting depending on [Authentication] and [Encryption] settings.
Default Key
Key 2
*******
Key 1
*******1
Key 3
*******
******* Key 4

method:
Default Key:Set 1 – 4 numerals for the default key.
Key1 – 4:Set a WEP key to the key number selected with [Default Key].
Either the 64-bit or 128-bit WEP key can be set. For the 64-bit key, input  ve
alphanumerics 
(or a 10-digit string for the hexadecimal format)...

18
Network Settings
   
Name Change
You can change the Display name to be displayed on the network.
Select [Name Change] in [Network Settings] menu and press 1 button.
The keyboard is displayed.
Up to 8 characters can be entered for the Display name.
Ok
ABCDE FGH I J K LMAll delete
NOPQR S T U VWX Y ZDelete
Space
abcde f gh i j k lm
nopq r s t uvwx y z
0123456789
!”#$%&’ +–/=?
_ ` | ~ ( ) [ ] { } ,@\ ˆ
.;:
Cancel
Name Change
Name0000

1 select
2 set
[Entering characters]
To enter text, select characters...

19
Network Settings
WEB Control
Set to [On] when controlling the display from a web browser on a PC connected via wired LAN.
Select [WEB Control] in [Network Settings] menu and press 1button.
Select [On] or [Off ]
.2
 If “RS-232C” is selected, HDMI communication via twisted pair cable transmitter becomes possible.
  For the case of “DIGITAL LINK/LAN”, see “DIGITAL LINK mode” (see page 22).
Control I/F Select
Select whether to control via RS-232C of the Display's SERIAL terminal or with the DIGITAL...

20
Network Settings
Network Status
Displays the current network status.
Select [Network Status] in [Network Settings] menu and press button.
The Display information, settings of wired LAN and wireless LAN are displayed.
Password
Set to [On] to perform password check when connecting with the Display using “Wireless Manager”.
By controlling connection with password setting, it is possible to prevent an external device from accidentally
connecting and interrupting images, etc.
Select [Password] in [Network...