Panasonic Full Hd Lcd Display Th 42lf20 Operating Instructions
Here you can view all the pages of manual Panasonic Full Hd Lcd Display Th 42lf20 Operating Instructions . The Panasonic manuals for Display are available online for free. You can easily download all the documents as PDF.
Page 31
SCREENSAVER START MODE FINISH TIME START TIME TIME OF DAY 6 : 15 12 : 30 PRESENT TIME OF DAY MON 15 : 00 SCREENSAVER START MODE SAVER DURATION SHOW DURATION INTERVAL 12 : 00 3 : 00 PRESENT TIME OF DAY MON 15 : 00 SCREENSAVER START MODE SCREENSAVER DURATIONSTANDBY AFTER SCR SAVER6 : 15 PRESENT TIME OF DAY MON 15 : 00 2 1 3 1/2 SIGNAL INPUT LABEL WOBBLING SET UP POWER MANAGEMENTOFF OFF AUTO POWER OFF OFF STANDBY SAVEOFF( SERIAL ) ECO OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN...
Page 32
![Page 32
1/2
SIGNAL
INPUT LABEL
WOBBLING
SET UP
OFFPOWER MANAGEMENTOFF
AUTO POWER OFF OFF
STANDBY SAVEOFF(
SERIAL )
ECO OFF
OSD LANGUAGE ENGLISH (
US )
COMPONENT/RGB-IN SELECT
RGBOFF
SCREENSAVER
32
Reduces power consumption
Press to select the menu to adjust.
Press to select “ON” or “OFF”.
On
Off
Press to exit from SET UP.
•
POWER MANAGEMENT: When this function is set to ON, it operates under the following conditi\
ons to turn the power
on or off automatically.
When no pictures are detected for 30 or so...](http://img.usermanuals.tech/thumb/58/71558/w300_th-42lf20_en_om_d-31.png "Page 32
1/2
SIGNAL
INPUT LABEL
WOBBLING
SET UP
OFFPOWER MANAGEMENTOFF
AUTO POWER OFF OFF
STANDBY SAVEOFF(
SERIAL )
ECO OFF
OSD LANGUAGE ENGLISH (
US )
COMPONENT/RGB-IN SELECT
RGBOFF
SCREENSAVER
32
Reduces power consumption
Press to select the menu to adjust.
Press to select “ON” or “OFF”.
On
Off
Press to exit from SET UP.
•
POWER MANAGEMENT: When this function is set to ON, it operates under the following conditi\
ons to turn the power
on or off automatically.
When no pictures are detected for 30 or so...")
1/2 SIGNAL INPUT LABEL WOBBLING SET UP OFFPOWER MANAGEMENTOFF AUTO POWER OFF OFF STANDBY SAVEOFF( SERIAL ) ECO OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGBOFF SCREENSAVER 32 Reduces power consumption Press to select the menu to adjust. Press to select “ON” or “OFF”. On Off Press to exit from SET UP. • POWER MANAGEMENT: When this function is set to ON, it operates under the following conditi\ ons to turn the power on or off automatically. When no pictures are detected for 30 or so...
Page 33
![Page 33
1/2
SIGNALSCREEN SAVERINPUT LABELWOBBLING
POWER MANAGEMENTOFF
AUTO POWER OFF OFF
ECO OFF
OSD LANGUAGE ENGLISH (
US )
COMPONENT/RGB-IN SELECT
RGB
OFF
SET UP
STANDBY SAVEOFF(SERIAL )
Press to display the SETUP menu.
Press to select INPUT LABEL.
Press to display the INPUT LABEL screen.
Press to select image input.
Press to change input label.1
2
3
VIDEO
Component
INPUT LABEL
PCDVIHDMI1
HDMI2
VIDEO
Component
PC
DVI
HDMI1
HDMI2
This function can change the label of the Input signal to be displayed. \
(see...](http://img.usermanuals.tech/thumb/58/71558/w300_th-42lf20_en_om_d-32.png "Page 33
1/2
SIGNALSCREEN SAVERINPUT LABELWOBBLING
POWER MANAGEMENTOFF
AUTO POWER OFF OFF
ECO OFF
OSD LANGUAGE ENGLISH (
US )
COMPONENT/RGB-IN SELECT
RGB
OFF
SET UP
STANDBY SAVEOFF(SERIAL )
Press to display the SETUP menu.
Press to select INPUT LABEL.
Press to display the INPUT LABEL screen.
Press to select image input.
Press to change input label.1
2
3
VIDEO
Component
INPUT LABEL
PCDVIHDMI1
HDMI2
VIDEO
Component
PC
DVI
HDMI1
HDMI2
This function can change the label of the Input signal to be displayed. \
(see...")
1/2 SIGNALSCREEN SAVERINPUT LABELWOBBLING POWER MANAGEMENTOFF AUTO POWER OFF OFF ECO OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB OFF SET UP STANDBY SAVEOFF(SERIAL ) Press to display the SETUP menu. Press to select INPUT LABEL. Press to display the INPUT LABEL screen. Press to select image input. Press to change input label.1 2 3 VIDEO Component INPUT LABEL PCDVIHDMI1 HDMI2 VIDEO Component PC DVI HDMI1 HDMI2 This function can change the label of the Input signal to be displayed. \ (see...
Page 34
34 Press to display the SET UP menu. Press to select OSD LANGUAGE. Press to select your preferred language. Press to display the SET UP menu. Press to select “MENU DISPLAY DURATION”. Press to adjust the display duration. Press to select “MENU TRANSPARENCY”. Press to adjust the transparency. Press to exit from adjust mode. Selectable languagesEnglish (UK) Deutsch Français Italiano Español English (US) ......(Chinese) .......(Japanese) Русский .......(Russian) Selecting the On-Screen Menu Language 1 1 4...
Page 35
![Page 35
2/2SET UP
MULTI DISPLAY SETUPSET UP TIMER
PRESENT TIME SETUPMENU DISPLAY DURATION15 SMENU TRANSPARENCY20
35
By lining up the Displays in groups, for example, as illustrated below, an enlarged picture may be displayed across all
screens.
For this mode of operation, each display has to be set up with a Display\
number to determine its location.
Press to select the MULTI DISPLAY SETUP.
Press to display the “MULTI DISPLAY SETUP” menu.
How to setup MULTI DISPLAY
group of 16 (4 × 4)
group of 4 (2 × 2) group...](http://img.usermanuals.tech/thumb/58/71558/w300_th-42lf20_en_om_d-34.png "Page 35
2/2SET UP
MULTI DISPLAY SETUPSET UP TIMER
PRESENT TIME SETUPMENU DISPLAY DURATION15 SMENU TRANSPARENCY20
35
By lining up the Displays in groups, for example, as illustrated below, an enlarged picture may be displayed across all
screens.
For this mode of operation, each display has to be set up with a Display\
number to determine its location.
Press to select the MULTI DISPLAY SETUP.
Press to display the “MULTI DISPLAY SETUP” menu.
How to setup MULTI DISPLAY
group of 16 (4 × 4)
group of 4 (2 × 2) group...")
2/2SET UP MULTI DISPLAY SETUPSET UP TIMER PRESENT TIME SETUPMENU DISPLAY DURATION15 SMENU TRANSPARENCY20 35 By lining up the Displays in groups, for example, as illustrated below, an enlarged picture may be displayed across all screens. For this mode of operation, each display has to be set up with a Display\ number to determine its location. Press to select the MULTI DISPLAY SETUP. Press to display the “MULTI DISPLAY SETUP” menu. How to setup MULTI DISPLAY group of 16 (4 × 4) group of 4 (2 × 2) group...
Page 36
36 SET UP for MULTI DISPLAY Item Details LOCATIONSelect the required arrangement number. (A1-E5 : Refer to the following) Display Number locations for each arrangement. (Examples) ( 2 × 1) ( 2 × 3 ) ( 4 × 4 ) ( 4 × 2 ) ( 5 × 5 ) A1 A2 A3 A4 A5 B1 B2 B3 B4 B5 C1 C2 C3 C4 C5 D1 D2 D3 D4 D5 E1 E2 E3 E4 E5 Press to exit from adjust mode.4
Page 37
![Page 37
1/2
SIGNAL
INPUT LABEL
WOBBLING
SET UP
OFF
POWER MANAGEMENTOFF
AUTO POWER OFF OFF
STANDBY SAVE OFF(
SERIAL )
ECO OFF
OSD LANGUAGE ENGLISH (
US )
COMPONENT/RGB-IN SELECT
RGB
SCREENSAVER
37
SET UP for Input Signals
COMPONENT / RGB IN SELECT
Select to match the signals from the source connected to the COMPONENT/R\
GB IN terminal.
Y, P
B, PR signals “COMPONENT”
RGB signals
“RGB”
Press to display the SET UP menu.
Press to select the “COMPONENT / RGB-IN SELECT”.
Press to select the desired mode.
COMPONENT...](http://img.usermanuals.tech/thumb/58/71558/w300_th-42lf20_en_om_d-36.png "Page 37
1/2
SIGNAL
INPUT LABEL
WOBBLING
SET UP
OFF
POWER MANAGEMENTOFF
AUTO POWER OFF OFF
STANDBY SAVE OFF(
SERIAL )
ECO OFF
OSD LANGUAGE ENGLISH (
US )
COMPONENT/RGB-IN SELECT
RGB
SCREENSAVER
37
SET UP for Input Signals
COMPONENT / RGB IN SELECT
Select to match the signals from the source connected to the COMPONENT/R\
GB IN terminal.
Y, P
B, PR signals “COMPONENT”
RGB signals
“RGB”
Press to display the SET UP menu.
Press to select the “COMPONENT / RGB-IN SELECT”.
Press to select the desired mode.
COMPONENT...")
1/2 SIGNAL INPUT LABEL WOBBLING SET UP OFF POWER MANAGEMENTOFF AUTO POWER OFF OFF STANDBY SAVE OFF( SERIAL ) ECO OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB SCREENSAVER 37 SET UP for Input Signals COMPONENT / RGB IN SELECT Select to match the signals from the source connected to the COMPONENT/R\ GB IN terminal. Y, P B, PR signals “COMPONENT” RGB signals “RGB” Press to display the SET UP menu. Press to select the “COMPONENT / RGB-IN SELECT”. Press to select the desired mode. COMPONENT...
Page 38
![Page 38
3D Y/C FILTERON
1/2
SIGNAL
INPUT LABEL
WOBBLING
SET UP
OFF
POWER MANAGEMENTOFF
AUTO POWER OFF OFF
STANDBY SAVE OFF(
SERIAL )
ECO OFF
OSD LANGUAGE ENGLISH (
US )
COMPONENT/RGB-IN SELECT
RGB
SCREENSAVER
3D Y/C FILTER
COLOR SYSTEM
SIGNAL
ON
AUTO
3 : 2 PULLDOWN OFF
[
VIDEO ]
NOISE REDUCTION
OFF
3 : 2 PULLDOWN
SIGNAL
OFF
[
Digital ]
NOISE REDUCTION
OFFH-FREQ.
V- F R E Q .kHz
Hz
63.98
60.02
DOT CLOCK FREQ.MHz
108.0
SIGNAL FORMAT 1280×1024/60
SIGNAL [
COMPONENT ]
XGA MODENOISE REDUCTION
OFFH-FREQ.
V- F...](http://img.usermanuals.tech/thumb/58/71558/w300_th-42lf20_en_om_d-37.png "Page 38
3D Y/C FILTERON
1/2
SIGNAL
INPUT LABEL
WOBBLING
SET UP
OFF
POWER MANAGEMENTOFF
AUTO POWER OFF OFF
STANDBY SAVE OFF(
SERIAL )
ECO OFF
OSD LANGUAGE ENGLISH (
US )
COMPONENT/RGB-IN SELECT
RGB
SCREENSAVER
3D Y/C FILTER
COLOR SYSTEM
SIGNAL
ON
AUTO
3 : 2 PULLDOWN OFF
[
VIDEO ]
NOISE REDUCTION
OFF
3 : 2 PULLDOWN
SIGNAL
OFF
[
Digital ]
NOISE REDUCTION
OFFH-FREQ.
V- F R E Q .kHz
Hz
63.98
60.02
DOT CLOCK FREQ.MHz
108.0
SIGNAL FORMAT 1280×1024/60
SIGNAL [
COMPONENT ]
XGA MODENOISE REDUCTION
OFFH-FREQ.
V- F...")
3D Y/C FILTERON 1/2 SIGNAL INPUT LABEL WOBBLING SET UP OFF POWER MANAGEMENTOFF AUTO POWER OFF OFF STANDBY SAVE OFF( SERIAL ) ECO OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB SCREENSAVER 3D Y/C FILTER COLOR SYSTEM SIGNAL ON AUTO 3 : 2 PULLDOWN OFF [ VIDEO ] NOISE REDUCTION OFF 3 : 2 PULLDOWN SIGNAL OFF [ Digital ] NOISE REDUCTION OFFH-FREQ. V- F R E Q .kHz Hz 63.98 60.02 DOT CLOCK FREQ.MHz 108.0 SIGNAL FORMAT 1280×1024/60 SIGNAL [ COMPONENT ] XGA MODENOISE REDUCTION OFFH-FREQ. V- F...
Page 39
![Page 39
3D Y/C FILTER
COLOR SYSTEM
SIGNAL
ON
AUTO
3 : 2 PULLDOWN OFF
[
VIDEO ]
3 : 2 PULLDOWN
OFF
XGA MODE
1024×768
39
3:2 PULLDOWN
COLOR SYSTEM
Select SIGNAL from the “SET UP” menu during Video (S Video) input signal mode.
(“SIGNAL [VIDEO]” menu is displayed.)
SET UP for Input Signals
Press to select the “COLOR SYSTEM” .
Press to select each function.
If the image becomes unstable:
With the system set on Auto, under conditions of low level or noisy
input signals the image may in rare cases become...](http://img.usermanuals.tech/thumb/58/71558/w300_th-42lf20_en_om_d-38.png "Page 39
3D Y/C FILTER
COLOR SYSTEM
SIGNAL
ON
AUTO
3 : 2 PULLDOWN OFF
[
VIDEO ]
3 : 2 PULLDOWN
OFF
XGA MODE
1024×768
39
3:2 PULLDOWN
COLOR SYSTEM
Select SIGNAL from the “SET UP” menu during Video (S Video) input signal mode.
(“SIGNAL [VIDEO]” menu is displayed.)
SET UP for Input Signals
Press to select the “COLOR SYSTEM” .
Press to select each function.
If the image becomes unstable:
With the system set on Auto, under conditions of low level or noisy
input signals the image may in rare cases become...")
3D Y/C FILTER COLOR SYSTEM SIGNAL ON AUTO 3 : 2 PULLDOWN OFF [ VIDEO ] 3 : 2 PULLDOWN OFF XGA MODE 1024×768 39 3:2 PULLDOWN COLOR SYSTEM Select SIGNAL from the “SET UP” menu during Video (S Video) input signal mode. (“SIGNAL [VIDEO]” menu is displayed.) SET UP for Input Signals Press to select the “COLOR SYSTEM” . Press to select each function. If the image becomes unstable: With the system set on Auto, under conditions of low level or noisy input signals the image may in rare cases become...
Page 40
![Page 40
()
NOISE REDUCTIONOFF
40
Note:
NOISE REDUCTION can be adjusted while a Video or Component signal is being applied.
SET UP for Input Signals
NOISE REDUCTION
Press to select “NOISE REDUCTION”.
Press to select “OFF”, “AUTO”, “MIN”, “MID”, “MAX”.
AUTO: NOISE REDUCTION will be automatically
selected from “MIN”, “MID” or “MAX”.
SYNC
SIGNAL [
RGB ]
3 : 2 PULLDOWN
XGA MODE AUTO
OFF
1024
×768
This function operates only during input from PC IN terminal.
Select SIGNAL from the “SET UP” menu during Component...](http://img.usermanuals.tech/thumb/58/71558/w300_th-42lf20_en_om_d-39.png "Page 40
()
NOISE REDUCTIONOFF
40
Note:
NOISE REDUCTION can be adjusted while a Video or Component signal is being applied.
SET UP for Input Signals
NOISE REDUCTION
Press to select “NOISE REDUCTION”.
Press to select “OFF”, “AUTO”, “MIN”, “MID”, “MAX”.
AUTO: NOISE REDUCTION will be automatically
selected from “MIN”, “MID” or “MAX”.
SYNC
SIGNAL [
RGB ]
3 : 2 PULLDOWN
XGA MODE AUTO
OFF
1024
×768
This function operates only during input from PC IN terminal.
Select SIGNAL from the “SET UP” menu during Component...")
() NOISE REDUCTIONOFF 40 Note: NOISE REDUCTION can be adjusted while a Video or Component signal is being applied. SET UP for Input Signals NOISE REDUCTION Press to select “NOISE REDUCTION”. Press to select “OFF”, “AUTO”, “MIN”, “MID”, “MAX”. AUTO: NOISE REDUCTION will be automatically selected from “MIN”, “MID” or “MAX”. SYNC SIGNAL [ RGB ] 3 : 2 PULLDOWN XGA MODE AUTO OFF 1024 ×768 This function operates only during input from PC IN terminal. Select SIGNAL from the “SET UP” menu during Component...