Panasonic Full HD LCD Display TH 42AF1 Basic Guide

11English
  

English12
  • 
In rare cases, the LAN connection is disabled due 
IWKH 

13English
   
Accessories
 
 
Accessories Supply
 

English14
   
Remote Control Batteries
 
1.   .
 
  2.   

15English
   
Connections
 
 
AC cord connection and fixing
 
Back of the unit
 
  AC cord fixing
 
  AC cord (supplied)
 
Plug the connector into the display unit.
  Plug the connector until it clicks.
  Note
●  

16English
   
Video equipment connection
 
 
IR IN
SERIAL 
OUT
IR OUT
SERIAL 
IN
G/Y/VIDEO B/PB/CBR/PR/CRAUDIO1 INAUDIO2 INCOMPONENT/RGB/VIDEO INDVI-D IN DVI-D OUTAUDIO OUTUSBPC INAV IN
12345678
Micro-USB
USB
OpenPort
PLATFORM
LAN
11
12
13
14
9
10
  1 PC IN:  PC Input Terminal
  Connect to video terminal of PC, 
video equipment with “YP
BPR / 
YCBCR” or “RGB” output.
  2 AUDIO1 IN:  Audio input terminal shared 
with DVI-D IN and PC IN
  3 COMPONENT / 
RGB / 
VIDEO IN:  COMPONENT / RGB Video 
Input...

17English
   
Before connecting
●  

English18
   
Identifying Controls
 
 
Main unit
 
●  
To take out/store the power indicator and remote 
control sensor, operate the lever on the rear panel.
  It is also possible to press the remote control 
sensor directly to store.
  Note
●  
For normal use, pull out the power indicator and 
remote control sensor from the edge side of the 

19English
 
INPUT
MENU
ENTER
8
8
8
  Unit
  55-inch model
  49-inch model
  42-inch model
  1  External Input Terminal
   / <  (Unit)>
  Selects the setting item on menu screen.
●  
In OpenPort PLATFORM operation mode
  [UP], [DOWN]: 
  Moves the cursor up and down.
  7  
  Configures the item on menu screen.
  Switches aspect mode.
●  
In OpenPort PLATFORM operation mode
  [ENTER]:
  Configures the item.
  [LONG PRESS ENTER]:
  Used for the operation that requires long press.
  8  Built-in speakers
●...

English20
   
Remote Control Transmitter
 
 
1  Standby (ON/OFF) button (/)
●  
Turns the power on or off when the Display is 
turned on at the . 
(see page 21)
  2  POSITION
  3  SETUP
  4  ENTER / Cursor buttons (
   )
●  
Used to operate the menu screens.
●  
With OpenPort PLATFORM input 
  Confirms the selected item, or move the cursor 
from right to left or up and down.
  5  ZOOM
  Enters the digital zoom mode.
  6  DEFAULT/HOME
●  
Resets the settings of picture, sound, etc., to 
defaults.
●   With...