Panasonic Ey7410 Operating Instructions Manual

Cordless Drill & Driver
Perceuse et tournevis sur batterie
Taladro y destornillador sin cable eléctrico
Operating Instructions
Instructions d’utilisation
Manual de instrucciones
IMPORTANTThis manual contains safety information. Read manual completely before f\
irst using this product and save this manual for future use.
IMPORTANTCe mode d’emploi contient des informations sur la sécurité. Lis\
ez-le en entier avant d’utiliser le produit et conservez-le pour référence.
IMPORTANTEEste manual contiene...

-  - 
Index/Index/Indice
English: Page 3
Français:  Page 13
Español:  Página  4
FUNCTIONAL DESCRIPTION
DESCRIPTION DES FONCTIONS
DESCRIPCIÓN FUNCIONAL
(N)
(M)
(L)
(K)
(A)
(D)
(B)
(C)
(G)
(J)
(H)
(I)
(E)
(F)
(A)Speed selector switchSélecteur de vitesse de rotationConmutador selector de velocidad
(B)Main switch lockVerrou de l’interrupteur principalBloqueo de interruptor principal
(C)Main switchInterrupteur principalInterruptor principal
(D)Battery pack (EY9L10)Batterie (EY9L10)Bloque de pilas...

- 3 -  
I.  GENERAL  SAFE­
TY RULES
 WARNING! Read all instructions
Failure  to  follow  all  instructions  listed below  may  result  in  electric  shock,  fire and/or  serious  injury.  The  term  “power tool”  in  all  of  the  warnings  listed  below refers  to  your  mains  operated  (corded) 
power  tool  and  battery  operated  (cord -
less) power tool.
SAVE THESE INSTRUCTIONS
Work Area Safety
1) Keep work area clean and well lit.Cluttered or dark areas invite accidents.
) Do  not  operate...

- 4 - 

3) Disconnect  the  plug  from  the  power source  and/or  the  battery  pack  from t he  powe r  t ool  be f o r e  m a k ing  a ny adjustments,  changing  accessories, or storing power tools. S u c h   p r e v e n t i v e   s a f e t y   m e a s u r e s reduce the risk of starting the power tool accidentally.
4) 
Store idle power tools out of the reach of  children  and  do  not  allow  persons unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are...

- 5 -  

Symbol Meaning
VVolts
Direct current
n0No load speed
…/minRevolutions or reciprocations per minutes
AhElectrical capacity of battery pack
Rotation only
 WARNING! 
Some dust created by power sanding, saw-ing, grinding, drilling, and other construction activities  contains  chemicals  known  to  the State  of  California  to  cause  cancer,  birth defects  or  other  reproductive  harm.  Some examples of these chemicals are:
•  Lead from lead-based paints
• 
Crystalline silica from bricks and...

- 6 - 

summer), which can lead to deterioration of the storage battery.
16) Do  not  charge  battery  pack  when  the 
temperature  is  BELOW  0°C  (3 °F)  or 
ABOVE 40°C (104°F). This is very impor-tant in order to maintain optimal condition of the battery pack.
17 ) Do  not  incinerate  the  battery  pack.  It can explode in a fire.
18 ) Avoid  dangerous  environment.  Do  not use charger in damp or wet locations.
19 ) The  charger  is  designed  to  operate  on standard  household  electrical...

- 7 -  

Reference for Adjusting Torque
SettingTorqueUse
1Approx: 0.9 N·m(3.0 kgf-cm or .6 in-lbs)
For driving screws
5Approx: 0.8 N·m(8.4 kgf-cm or 7.3 in-lbs)
9Approx: 1.35 N·m(13.8 kgf-cm or 1.0 in-lbs)
13Approx: 1.88 N·m
(19.  kgf-cm or 16.6 in-lbs)
17Approx: .41 N·m
(  4.6 kgf-cm or  1.3 in-lbs)
1Approx: .94 N·m(30.0 kgf-cm or  6.0 in-lbs)
Approx: 4.4 N·m(45.0 kgf-cm or 39.0 in-lbs)
For power-ful driving screws and drilling
●	When  using  at...

- 8 - 

h a s  a  n e g l i g i b l e  e ff e c t  o n  t h e operational capacity of the drill.
● The  LED  is  incapable  of  lighting the  tip  of  the  bit  when  the  drill  is 
used	in	the	straight	configuration.	
	Bit­locking Function
With the switch at off and the bit lock-ed in place, the tool can be used as a manual screw-driver - up to 14.7 N·m (150 kgf-cm, 130 in-lbs).There will be a little play in the driving shaft, but this is not a malfunction.
	Main Switch (ON/OFF)
Push  the  upper...

- 9 -  

[Battery Pack]
For Appropriate Use of Bat­
tery pack
Li­ion Battery pack (EY9L10)
• For  optimum  battery  life,  store  the  Li-ion battery pack following use without charging it.
• The  ambient  temperature  range  is between 0°C (3°F) and 40°C (104°F).
  If  the  battery  pack  is  used  when  the b a t t e r y  t e m p e r a t u r e  i s  b e l o w  0 ° C   (3°F),  the  tool  may  fail  to  function properly.
• When battery pack is not in use, keep it  away  from  other  metal...

- 10 - 

  
To AC outlet
4. During  charging,  the  charging  lamp will be lit.When charging is completed, an inter-nal electronic switch will automatically be triggered to prevent overcharging.
•  Charging  will  not  start  if  the  battery 
pack is warm (for example, immedi-ately after heavy-duty operation). The  orange  standby  lamp  will  be flashing until the battery cools down. 
  Charging  will  then  begin  automati-cally.
5. 
The  charge  lamp  (green)  will  flash 
slowly  once  the  battery...