Panasonic Ey6506 Operating Instructions Manual

Cordless Impact Driver
Operating Instructions
Model No: EY6506
IMPORTANT
This manual contains safety information. Read manual completely before fi rst using 
this product and save this manual for future use. 

- 2 - 
. GENERAL SAFETY GENERAL SAFETY 
RULES - FOR ALL RULES - FOR ALL 
BATTERY OPERAT-BATTERY OPERAT-
ED ED TOOLSTOOLS
WARNING!WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS.
 Failure to follow all instructions listed 
below, may result in electric shock, 
fire and/or serious personal injury.
SAVE THESE INSTRUCTIONSSAVE THESE  INSTRUCTIONS
Work AreaWork Area
 1) Keep your work area clean and well 
lit.
  Cluttered benches and dark areas 
invite accidents.
 2) Do not operate power tools in 
explosive...

- 3 -  
  Such preventive safety measures 
reduce the risk of starting the tool acci-
dentally.
  16) Store idle tools out of reach of chil-
dren and other untrained persons. 
  Tools are dangerous in the hands of 
untrained users.
  17) When battery pack is not in use, keep 
it away from other metal objects 
like: paper clips, coins, keys, nails, 
screws, or other small metal objects 
that can make a connection from one 
terminal to another. 
  Shorting the battery terminals together 
may cause sparks,...

- 4 - 
WARNING:WARNING:
  Some dust created by power sanding, 
sawing, grinding, drilling, and other 
construction activities contains chemi-
cals known to the State of California 
to cause cancer, birth defects or other 
reproductive harm. Some examples 
of these chemicals are:
 Lead from lead-based paints Crystalline silica from bricks and 
cement and other masonry products
 Arsenic and chromium from chemi-
cally-treated lumber.
  To reduce your exposure to these 
chemicals: work in a well ventilated...

- 5 -  
or ABOVE 40°C (104°F). This is very 
important in order to maintain optimal 
condition of the battery pack.
  17) Do not incinerate the battery pack. It 
can explode in a fire.
  18) Avoid dangerous environment. Do not 
use charger in damp or wet locations.
  19) The charger is designed to operate on 
standard household electrical power 
only. Do not attempt to use it on any 
other voltage!
  20) Do not abuse cord. Never carry charger 
by cord or yank it to disconnect from 
outlet. Keep cord away...

- 6 - 
.ASSEMBLYASSEMBLY
Attaching or removing bitAttaching or removing bit
NOTE:
When attaching or removing a bit, 
disconnect battery pack from tool or 
place the switch in the center posi-
tion (switch lock).
 1. Hold the collar of quick connect chuck 
and pull it against the driver.
  2. Insert the bit into the chuck.
 3. The bit holder will return to its original 
position when it is released.
 4. Pull the bit to make sure it does not 
come out.
 5. To remove the bit, pull back on the bit 
holder in...

- 7 -  
  When operating with a Ni-MH bat-
tery pack, make sure the place is well-
venti lated.
Battery Pack LifeThe rechargeable batteries have 
a limited life. If the operation time 
becomes extremely short after 
recharging, replace the battery pack 
with a new one.
ChargingCharging
NOTE:
When you charge the battery pack for 
the first time, or after prolonged stor-
age, charge it for about 24 hours to 
bring the battery up to full capacity.
Battery charger (EY0110)
  1. Plug the charger into the AC...

- 8 - 
.LAMP INDICATIONS.LAMP INDICATIONS
Red Flashing
Red Lit
Green Flashing quickly
Orange Lit
Orange FlashingCharger is plugged into the AC outlet. 
Ready to charge.
Now charging
Charging is completed.
Battery pack is warm. Charging will beginwhen temperature of battery pack drops.
Charging is not possible. Clogged with 
dust or malfunction of the battery pack.
. MAINTENANCE. MAINTENANCE
Use only a dry, soft cloth for wiping the unit. Do not use a damp cloth, thinner, ben-
zine, or other volatile...

- 9 -  
Bolt Tightening Conditions

     	 

 
  
	

  
   

  
 !
  #$

   	
 
 

%
 
%&



&
&%
	
&&


	
%




(	
(
%






   
     


 2) Tightening time
  Longer tightening time results in 
increased tightening torque. Excessive 
tightening, how ever, adds no value and 
reduces the life of the tool.
 3) Different...

- 10 - 
. ACCESSORIESACCESSORIES
Use only bits suitable for size of drill.
MAXIMUM RECOMMENDED CAPACITIES
Model EY6506
Screw
drivingWood screw ø 5.8 mm (7/32) 
± 75 mm (3) Yellow pine
Self-drilling screw ø 4.0 mm (5/32) 
± 13 mm (1/2) SPC t = 1.6 mm (1/16)
Bolt fasteningStandard bolt : M12
High tensile bolt : M10
. SPECIFICATIONS. SPECIFICATIONS
MAIN UNIT
Model EY6506
Motor DC Motor 12 V
No load speed 0 ~ 2800 /min (rpm)
Maximum torque 98.0 Nm, (1000 k
f-cm, 867 in-lbs)
Impact per minute 0 ~ 3000 ipm in...