Panasonic Electronic Board UB-T780BP Operating Instructions

UB-T780BP
Operating Instructions
(For Basic Operations)
Electronic Board
(elite Panaboard)
Model No. UB-T780BP
Installation Manual Included (for qualified service personnel)
• To assemble this unit, please refer to the Installation Manual on pages 29 through 48.
 Before operating this unit, please read these instructions completely and keep them carefully for future 
reference.
 This unit is designed for installation by a qualified servicing dealer.
Installation performed by non-authorized individuals...

IntroductionThank you for purchasing the Panasonic Electronic Board.
For optimum performance and safety, please read these instructions carefully.
Feature Highlights The elite Panaboard is supplied power through the USB cable connected to a computer. You do not need to
plug in the elite Panaboard to an AC outlet. Using a projector to display the contents of the computer ’s screen
on the elite Panaboard, you can do the following.
Electronic Pen Features •Manipulate objects on the computer screen by using...

Things you should keep a record ofFor your future referenceDate of purchaseSerial numberDealer’s nameDealer’s addressDealer’s tel no.
About the Operating InstructionsThere are 2 separate operating manuals for the elite Panaboard.
For Basic Operations(this document)Instructions for connecting and operating the elite Panaboard, as
well as instructions for installation construction.
For Software
(electronic documentation)
Instructions for the included elite Panaboard software and elite
Panaboard book. The...

•All other trademarks identified herein are the property of their respective owners.
Federal Communications Commission Requirements For United States Only
NoteThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency...

System RequirementsComputerIBM®
 PC/AT ®
 or compatible with a CD-ROM driveCPUIntel ®
 Pentium ®
 4 processor or laterInterfaceUSB 2.0
Note
•For details about the system requirements, refer to the Operating Instructions (For Software).
Exemption of Liability Panasonic System Networks Co., Ltd. is not responsible for accidents or injuries caused by, but not limited to,
the following:
1. Altering the device or improper installation construction.
2. Using the device for purposes beyond its intended use.
3....

Table of ContentsFor Your Safety .. ...................................................................................... 7
For Your Safety .. ............................................................................................................... 7
Precautions .. .................................................................................................................... 10
Usage .. .................................................................................................... 11...

For Your Safety
To prevent severe injury and loss of life, read this
section carefully before using the unit to ensure proper
and safe operation of your unit.
The following graphic symbols are used in this
Operating Instructions manual.Denotes a potential
hazard that could
result in serious
injury or death.Denotes hazards
that could result in
minor injury or
damage to the unit.These symbols are used
to alert operators to a
specific operating
procedure that must not
be performed.This symbol is used to...

Installation and RelocationHave the unit installed, removed and
disposed of only by qualified service
personnel.When the unit will no longer be used, in
order to prevent it from falling, do not
leave the unit installed, but remove it. If
the unit falls, it can cause injury.
Operating Safeguards
If metal fragments or water gets into the
unit, disconnect the unit immediately.
Contact your dealer for service.
Operating the contaminated unit can
cause fire or electric shock.Never open or remove unit covers...

Power
When the unit is not used over an
extended period of time, disconnect the
USB cable. If an unused unit is left
connected to a power source for a long
period, degraded insulation may cause
electric shock, current leakage or fire.The unit should be used only with the
USB cable enclosed with the unit.
Installation and Relocation
Do not position the unit in a location
where it is unstable.Do not place the unit in a hot humid or
dusty environment. Prolonged exposure
to these adverse conditions may...

Operating SafeguardsIf the unit is fallen down or damaged,
disconnect the USB cable. Otherwise, it
may cause fire or electric shock.Do not lean against the screen or on the
cover (lower), even if the unit is mounted
on the wall.
Battery
When the unit is not used over an
extended period of time, take the
batteries out of the unit. Otherwise, the
batteries may leak. Do not use the leaked
batteries.Precautions
About Using the Battery
If a battery is used improperly, the battery may leak,
causing corrosion...