Panasonic EB-TX210 EB-TX220 Operating Instructions

Chapter 2
Getting Started    9
Charging the Battery for an EB-TX210 or EB-TX220 
Series Phone
1
With the directional arrows facing up, attach the AC adapter 
to the phone.
•If you are using the EB-TX220 Series phone, you must 
remove the connector cap from the bottom of the phone 
before charging.
2Insert the plug into an AC power outlet. The indicator light 
turns red. If the phone is on during charging, the charging 
time will be extended. When the battery is charged, the 
indicator light turns off and...

Chapter 2
10    Getting Started
EB-TX210 Series Battery Specifications
EB-TX220 Series Battery Specifications
Times listed in the tables above may vary depending 
on usage and charging conditions.
ModeBattery Type (Lithium-Ion)Talk
TimeStandby 
TimeCharge 
Time
 
AnalogEB-BS210
Standard
650 mAhUp to 
60 min.Approx. 
5.6 hrs.Approx. 
100 min.
EB-BL210
Extended
1400 mAhUp to 
120 min.Approx. 
12 hrs.Approx. 
200 min.
DigitalEB-BS210
Standard
650 mAhUp to 
120 min.Up to 
200 hrs.Approx. 
100 min.
EB-BL210...

Chapter 2
Getting Started    11
Removing Battery from an EB-TX210 Series Phone
1
Slide and hold the latch on the back of phone.
2While holding the latch, grasp the sides of the battery and lift.
Removing Battery from an EB-TX220 Series Phone
1
Press down on the battery cover.
2Slide the battery cover off.
3Slide the battery release latch all the way to the left.
4Lift the battery out of the battery pocket. 

Chapter 2
12    Getting Started
Low-Battery Warning
The phone periodically beeps when the battery is low. The 
battery icon (
) flashes and the Low Battery
 message is 
displayed.
If your phone is at standby (idle) when the Low Battery
 
message appears, you will not be able to place or receive 
calls until the battery has been recharged, or until you attach 
an AC or DC adapter. If you are in a call when you hear the 
beep and the message appears, quickly end your call or 
attach an AC or DC adapter....

Chapter 2
Getting Started    13
Function Keys
Describes operations related to each function key.
KeyFunction
Left Softkey: Press to use the function displayed above 
the key.
From standby mode, press and hold to turn on Key Lock.
Right Softkey: Press to use the function displayed above 
the key.
Navigation Key: Press the appropriate area of this key to 
scroll in the desired direction. Use this key to scroll 
through menus, text, and the Phonebook.
Message Key: Press and hold to retrieve voice mail...

Chapter 2
14    Getting Started
Display Icons
Icons that appear on the display depend on what features you 
are using and the options you have selected.
Master Display and Icons
IconIndicates
Charged battery.
Low battery (flashes).
New text message received. When icon is darkened, 
indicates that text message storage is full.
New voice mail message received.
Digital service available.
Active call is in operation.
Voice privacy feature is on.
Quiet Mode is on. 
Vibration alert is on. Ring volume is set to...

Chapter 2
Getting Started    15
Powering Phone On and Off
Powering ON
1
Press and hold   until a tone sounds and the backlight 
lights.
The battery indicator and signal icon are displayed.
If your Welcome Screen is turned on, the message briefly 
appears.
2Your wireless service provider’s name is displayed if you are 
within the coverage area.
Powering OFF
Press and hold  to power off your phone.
Standby Display
The standby display appears when your phone is on and in an 
“idle” state. You may return...

Chapter 2
16    Getting Started
Moving through the Menu
You access the Main Menu from the standby display:
MENU shows on the bottom left side of the display. To access 
the Main Menu, press the corresponding softkey ( ) on the 
keypad just below where MENU is displayed. After entering 
the Main Menu, press either softkey (  or  ) to select the 
options displayed above them. 
Within the menu, the selected feature or function is indicated 
by an arrow ( ). Use the navigation key scroll areas
 ( or  ) 
to...

Chapter 2
Getting Started  17
Menu Map 

Chapter 2
18    Getting Started
Setting Date and Time
1From standby, press  (MENU) to enter the Main Menu.
2Press  to scroll to Phone Settings. Press   (OK).
3Press  to scroll to Time Settings. Press   (OK).
The arrow points to Date/Time
.
4Press  (OK).
5Enter the digits for the date in the format: month/day/year.
6Press  to scroll to set the time.
7Enter the digits for the time using a 12-hour clock.
8Press  to select the AM/PM setting.
9Press   (AM/PM) to switch between AM and PM.
10Press   (OK) to...