Panasonic E 37 V Dome Network Camera Quick_Start_Guide

 i 
 
 
 
 
E-37-V Dome Network Camera  
Quick Start Guide  
 
 
 
 
 
 
 
 
 
 
 
 
 
  

 ii 
W elcome 
Thank you for purchasing our Network camera! 
This user’s manual is designed to be a reference tool for your system.  
Please read the following safeguard and warnings carefully before you use this series product! 
Please keep this user’s manual well  for future reference! 
 
Important  Safeguards and Warnings  
1．Electrical safety 
All installation and operation here should conform to your local electrical safety codes.  
Please check if the power supply is correct before operating the...

 iii 
Please do not dismantle the device; there is no component which can be fixed  by users themselves in 
the machine. It may cause water leakage or bad image for the device due to unprofessional dismantling. 
It  is recommended to use the device with  thunder proof device in order to improve thunder proof effect.  
The grounding holes of the product are recommended to be grounded to further enhance the reliability 
of the camera. 
Do not touch the CCD (CMOS) optic component directly. You can use the...

 iv 
Please refer to the disk for more details, check and download corresponding user’s manual and tool. 
Before installation, please open the package and check all the components are included. 
Contact your local retailer ASAP  if something is broken in your package. 
 
Accessory Name Amount 
Network  Camera Unit 1 
Quick Start Guide 1 
Installation Accessories Bag 1 
CD 1 
 
 
 
 
  

                                                                            
 1 
1 St ructure  
Note: 
The following figures are for reference only, which are used to know  each structure component and 
cable port functions.  
There are differences about wire structure for some product models, please refer to the actual object 
for more details. 
1.1 C omponents 
You can refer to the following figure for component structure. See 
 
 
Figure 1-1. 
 
 
 
Figure 1-1 Component structure 
Please refer to the...

                                                                            
 2 
 
 
 
 
 
1.2 F ramework a nd D imension 
Please refer to the following two figures for dimension information. The unit is mm. See Figure 1-2 
       
 
Figure 1-2 Dimension illustration  
Port  Port Name Note 
Port 3 Power  input port  
 Connect to DC 12V power, input power. 
Port 4  Internet access port  
Network  data in/out and PoE.  
Note: 
 Some devices do not support PoE.   

                                                                            
 3 
2 De v ice I n stallation  
2.1 Ins tallation S teps  
Different models may have different ways  to install due to different appearance, please refer to the 
corresponding figures according to the actual products.  
 
Manual Vari-focal Camera (1-a)                          Motorized  Vari-focal Camera (1-b) 
 
Fixed Focus X-Y-Z  Rotation Camera (1-c) 
 
Figure 2-1 
 
 
 
 
 
 
  

                                                                            
 4 
Important 
Be fore the installation, please make  sure the installation surface can at le ast support 3x we ight 
of the  came ra and the bracket.   
 
Please follow the steps listed below to install the device.  Please refer to Figure 2-1 for reference. 
Ste p 1 
Use  inner hex wrench in the accessories bag to open dome enclosure by unfastening three inner hex 
screws on enclosure.  
Ste p 2 
Please take the installation...

                                                                            
 5 
 
Figure 2-2  
Note:  
 Long press the “Reset” button shown in Figure 2-2 for 10 seconds when the device is power on if 
the device needs to be restored to factory setting.  
 If  the device needs to use WPS function, short press “Reset” button shown in Figure 2-2 for 1~2 
seconds when the device is power on, press the WPS  button of the router, generally the device 
can be connected to the corresponding router within 1...

                                                                            
 6 
Figure 2-3 Micro SD Card installation illustration 1 
     
 
Figure 2-4 Micro SD Card installation illustration 2