Panasonic Dvd Vcr Deck Pv D4745 Operating Instructions

31
VCR Operation
*Important:If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
Repeat Play
Set to playback a recording over and over.
32 1
Press ACTION
to display MENU.
Press 
to select “SET UP
VCR,” and press
SET.
Playback repeats at tape end or if
unrecorded portion over 30 sec. is detected.
Press ACTION
to return to normal screen.
4
Press to select “REPEAT
PLAY,” and press
SET to set “ON” or
“OFF.”
Note
For repeat play in DVD mode, see...

32For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Tape Operation (continued)
DETECTING TAPE  POSITION
To find out the present tape position and amount of tape
remaining.
1
“DETECTING TAPE POSITION”
only appears the first time a
cassette is inserted and it takes
several seconds for correct
indication to appear.
The present tape position
indication and amount of tape
remaining (according to tape
speed) are displayed.
Tape remaining...

33
VCR Operation
Weak Signal Display Feature
When “ON,” picture is displayed regardless of signal
strength.
ON: Picture is displayed regardless of signal
condition, and may not always be clearly visible.
OFF:Screen turns solid blue when signal is weak or
non-existent.
Selecting ON has no effect on connected equipment
with blue back feature.
Press ACTION
to return to normal screen.
4 3 2
Press 
to select “SET UP
CHANNEL,” and
press SET.
Press 
to select “WEAK SIGNAL
DISPLAY,” and
press SET
to set “ON”...

34For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Special VCR Features (continued)
*Important:If a remote control button does
not work when pressed, press
the VCR button on the remote
and try the button again.VCR/TV Selector FeatureVCR/TV Selection Feature
The VCR/TV selection can be set to auto or manual.
3 1
Press ACTION*
to display MENU.
Press 
to select “AUTO VCR/TV,”
and
press SET
to set “ON” or “OFF.”
Press ACTION
to return to...

35
VCR Operation
Copying Your Tapes  (Dubbing)
1Insert a pre-recorded tape.
2
Insert a blank tape with record tab.
Press REC, then STILL/PAUSE
immediately to enter REC/PAUSE mode.
3
Press INPUT to set DECK Input mode to
LINE for Video Input.
(See “Selecting the Input Mode” below.)
4
Press PLAY to start dubbing.
Playing VCR starts playback.Press STILL/PAUSE to start dubbing.
DECK starts recording.
Press STOP to stop dubbing.
Caution:Unauthorized exchanging and/or copying of copyrighted recordings may be...

36For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Disc Operation
Ready Checklist
Please read “Basic DVD Operation”
on page 22.
[Subtitle language]
[Audio sound track language]
Change the No. by pressing ,
and press SET.
[Audio attribute 1 type, sampling
frequency, bit No. of the disc
 (see p. 53.)]
If, after several presses of the AUDIO
button the language does not change,
language selection is not offered on
the disc.
When disc is...

37
When  appears on the screen while
a button is being operated, it means
that the corresponding operation is
prohibited by DECK or the disc.
1Press AUDIO in Play mode
to display the audio screen.
Vocal Selection for Karaoke Discs (DVD/Video CD)
DVDs may contain scenes shot from multiple camera
angles allowing the same scene to be viewed at different
angles. You can view these angles, if available, using the
ANGLE button.
1
Press ANGLE
in Play mode to display the
angle selection on-screen.
Display...

38For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
You can program specific tracks and order of play.
Program Play (Video CD/CD only)
Ready Checklist
DECK is in DVD mode, press DVD.
Video CD or CD is inserted.
1Press ACTION
to display DVD MAIN MENU.
2
Press to select
“PLAY MODE,” and
press 
SETto display.
3
Press 
to select
“PROGRAM PLAY,”
and
press 
SET
to display.
5
Press  
to select “START,” and
press SET
to start play of programs...

39
NotesProgram Repeat Play
(Video CD/CD only)
4Press SET to enter Select mode.
5
Press  to select “DISC.”(DECK Information Screen) (DECK Information Screen)
1Do operation steps 1 through 5
on the previous page.
2Press DISPLAY to display Disc Information
screen.
(Disc Information Screen)
3Press DISPLAY to display DECK Information
screen.
6
Press SET to set mode.
Cursor moves to “REPEAT.”
To cancel, select “REPEAT : OFF”
in step 5, then press 
SET. *Important: if a remote control button does not work when...

40For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Tracks are played in a random order.
Random Play (Video CD/CD only)
Press ACTION*
to display DVD MAIN MENU.1
Disc Operation (continued)
Press 
to select “PLAY MODE,”
and
press 
SET
to display.
2
Press to select
“RANDOM PLAY,” and
press 
SETto begin random play.
To cancel, press STOPduring play, then pressCLEAR.
3
Ready Checklist
DECK is in DVD mode, press DVD.
MENU
STOP PLAY NUMBER...