Panasonic Dvd System Sc Mt1 Operating Instructions

							21
RQT6719
Disc operations
Using On-Screen Menu Icons
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
On-Screen Menu Icons are menus that contain information about the 
disc or unit. These menus allow you to perform operations by 
changing this information.
1Press [DISPLAY].
Each time you press the button:
[>Disc information (➡ page 22)
l;
l>Progress indicator (➡ right)
l;
l>Unit information (➡ page 22)
l;
{=Original display
2[Unit\information\only]
While the leftmost icon is highlighted
Press [3, 4] to select the menu.
Each time you press the button:
[>Play menu
l;:
l>Display menu
l;:
l>Audio menu
l;:
{>Picture menu
3Press [2, 1] to select the item.
4Press [3, 4] to select the setting.
≥Items with “3” or “4” above and below can be changed by 
[3, 4].
≥Press [ENTER] if the setting does not change after pressing 
[3, 4].
≥Some items require different operations. Read the 
explanations on the following pages.
For your reference
≥Depending on the condition of the unit (playing, stopped, etc.) and 
the type of software you are playing, there are some items that you 
cannot select or change.
≥When numbers are displayed (e.g. title No.), the numbered buttons 
are also effective for setting. After entering the numbers, press 
[ENTER] to register the setting.
To clear the menus
Press [RETURN] until the menus disappear.
∫To change the position of the icons
1Press [2, 1] to select the rightmost icon.
2Press [3, 4] to move the icons.
(There are 5 positions.)
Indicates how far you have played through an item.
Example [DVD-V]
1Current position [RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
2PG: Program number [RAM]
PL:  Play list number [RAM]
T: Title number [DVD-V]
Track number [VCD] [CD]
G: Group number [DVD-A] [WMA] [MP3]
3T:  Track number in group [DVD-A] [WMA] [MP3]
C: Chapter number [DVD-V]
4Condition –  play, pause, or slow/search
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
Play speed (➡ below)
5Changing the time display [RAM] [DVD-A] [DVD-V] [VCD] [CD]
Press [3, 4] to show the elapsed play time or remaining time for 
the program, play list, track or title (or chapter during program 
and random play).
Elapsed play time [WMA] [MP3]
(display only, cannot be changed)
[DVD-V] (Dolby Digital only)
You can slow down or speed up play.
During play
Press [2] (slower) or [1] (faster).
There are five speeds:
k0.8()k0.9()k1.0 (normal speed)()k1.2()k1.4
After you change the speed, output is in stereo.
Sound is stereo as long as “k1.0” is orange.
To return to normal play (surround sound), press [1] (play) or 
[ENTER].
Normal play is also restored when you return the speed to k1.0 and 
clear the progress indicator.
Common procedures
AV SYSTEM
SLEEP
FL DISPLAY
DIMMER
PLAY MODE
MIX 2CH
REPEAT
CANCEL
SKIP
CH
TOP MENU
DISPLAY
VOLUME
MUTING
PL C.FOCUSSFCSUBWOOFER
LEVEL
FM MODE
SETUPZOOM GROUP AUDIO
RETURN
TV VOL 
sTV VOL r
DIRECT
NAVIGATORPLAY LISTMENU
SLOW/SEARCH
123
456
78
09
TUNER/BAND DVD/CD
TV VCR /AUX
ENTER
CH SELECT
TEST
TV/VIDEO
S10/ENTERPOSITION
MEMORY
S.SRND
C.S.M.
342 1
ENTER
RETURNDISPLAY
1
Numbered 
buttons
Progress indicator
Changing play speed
23
4
5 1
2 2 1 : 46 : 50 
						

							22
RQT6719
Disc operations
Using On-Screen Menu Icons
Unless otherwise indicated, select items with [2, 1] and change with [3, 4].
Audio/Subtitle language
[Play\menu] [Audio\menu] 
Disc information
2 2 1 : 46 : 50Digital
1 ENG 3/2.1 chON
1 ENG
1
1
23456
128kbps
44.1kHz12 18Vo c a l
1        OFF  Page1  ReturnSlideshow1ON
L R
789:;
1PG: Program number [RAM]
PL: Play list number [RAM]
G: Group number [DVD-A] [WMA] [MP3]
T: Title number [DVD-V]
T:Track number [VCD] [CD][3, 4]
;
[ENTER]
2T: Track number in group
T:[DVD-A] [WMA] [MP3]
C: Chapter number [DVD-V]
3Time [RAM] [DVD-A] [DVD-V]
Select a position to start play by 
specifying a time.Numbered 
buttons
;
[ENTER]
Changing the time display
[RAM] [DVD-A] [DVD-V] [VCD] [CD]
([WMA] [MP3] Display only)
[>Elapsed play time for the program, play list, title or 
l>track
l;:
l>Remaining time for the group ([DVD-A]) or disc
l>([VCD] [CD])
l;:
{>Remaining time for the program, play list, title or track
4Soundtrack [RAM] [DVD-A] [DVD-V]
(➡ page 17)
5Subtitle language [DVD-A] [DVD-V]
(➡ page 17)
Subtitles on/off [RAM] [DVD-A] [DVD-V]
Track information on/off [WMA] [MP3] [CD] (CD text only)
6Angle number [DVD-A] [DVD-V]
7Track number in disc [WMA] [MP3][3, 4]
;
[ENTER]
8Total number of tracks on disc
[WMA] [MP3]Display 
only
9Karaoke vocal on/off
[DVD-V] (Karaoke DVD only)
If a DVD title is a duet, select V1 or V2 to duet with the 
unit.
:Current bitrate (kbps)
Current sampling frequency (kHz)
[WMA] [MP3]Display 
only
;Audio mode [RAM] [VCD]
LR()L()R
^--------------------J
Select “Return”>[ENTER]
>Slideshow [DVD-A]
Picture numberDisplay 
only
ENG: English
FRA: French
DEU: German
ITA: Italian
ESP: Spanish
NLD: DutchSVE: Swedish
NOR: Norwegian
DAN: Danish
POR: Portuguese
RUS: Russian
JPN: JapaneseCHI: Chinese
KOR : Korea n
MAL: Malay
VIE: Vietnamese
THA: Thai
¢: Others
Unit information
1A-B repeat (➡ page 15)
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3][ENTER]
2Repeat mode (➡ page 15)
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
3Play mode(➡ page 16)
[DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
---: Normal play PGM: Program play
RND: Random play
ALL: All group play ([DVD-A])Display 
only
4Marker
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]➡ Page 
18
OFF
1 2 3 A B
12
3
4
1Re-master (➡ page 27)
[RAM] [DVD-A] [DVD-V] [CD] [WMA] [MP3]
2Dialogue Enhancer on/off [DVD-V]
(Discs where the dialogue is recorded in the center 
channel)
This makes the dialogue in movies easier to hear.
12
OFFOFF/48kHz 
						

							23
RQT6719
Disc operations
[Display\menu] [Picture\menu] [RAM] [DVD-A] [DVD-V] [VCD]
To change the user mode
1 Select User mode and press [1] to highlight the 
number. 
2Press [3, 4] to select “1”, “2” or “3”.
U1: MPEG D.N.R. (Digital Noise Reduction)
U2
U3 14:3 Aspect
[RAM] [DVD-A] [DVD-V] [VCD]
Select how to show images made for 4:3 aspect screens on 
a 16:9 aspect television.
≥Normal:laterally stretches images made for a 4:3 
screen.
≥Auto:expands suitable 4:3 letterbox images to fill more 
of the screen. Other images appear in full in the center of 
the screen. 
≥Shrink:images appear in the center of the screen. 
≥Zoom:expands all images to fill the screen.
If your television has a similar feature, use it instead for a 
better effect.
2Zoom (➡ page 18)
[RAM] [DVD-A] [DVD-V] [VCD][ENTER]
;
[2, 1]
;
[ENTER]
Making fine adjustments to the zoom ratio
3Subtitle position/Subtitle brightness [DVD-A] [DVD-V]
≥Position (0 to j60): in 2 unit steps
≥Brightness (Auto§/0 to j9)§The brightness adjusts automatically against the 
background.
4Bitrate display on/off [RAM] [DVD-A] [DVD-V] [VCD]
During play: shows the bitrate (approximate values) of the 
video being played
While paused: shows the data volume of the frame and 
type of picture (➡ page 34, Glossary — I/P/
B)
5OSD brightness (j3 to i3)
Adjust the brightness of the on-screen displays.
2345
0x1.00
1
Normal0    0OFF
9.438 Mbps
Bit rateCur.  7.507 Mbps
Ave.  6.730 Mbps5.0
Mbps
[2, 1]
Current 
bitrate
Average bitrateA record of bitrates for 
a sampling period.1Picture mode
≥N:Normal mode
≥S:Soft mode (Soft picture with fewer video artifacts)
≥F:Fine mode (Details are sharper)
≥C1:Mellows images and enhances detail in dark scenes
≥C2:Sharpens images and enhances detail in dark 
scenes
≥U1/U2/U3:User mode (➡ below)
2Video output mode
≥480I:Interlace video
≥480P:Progressive video (“PROG.” is on)
3Transfer mode
Select the method of conversion for progressive output to 
suit the type of material being played.
≥Auto 1 (normal):for viewing film material
≥Auto 2:for viewing film material (the same as Auto 1, but 
able to convert 30-frame-per-second progressive video)
≥Video:for video material
4Depth Enhancer (0 to i4)
Reduces the rough noise in the background to give a 
greater feeling of depth.
53D-NR (0 to i4)/Dot NR (On)
Reduces overall noise/Reduces the dot noise that occurs at 
the borders between colors.
6Block NR (0 to i3)
Smoothes block noise.
7Mosquito NR (0 to i3)
Reduces the smudging that appears around contrasting 
sections of the picture.
8Contrast (j7 to i7)
Increases the contrast between light and dark parts of the 
picture.
9Brightness (0 to i15)
Brightens the picture.
:Sharpness (j7 to i7)
Adjusts the sharpness of the edges of the horizontal lines.
;Color (j7 to i7)
Adjust the shade of the picture’s color.

						

							24
RQT6719
Radio operations
The radio
1Press [TUNER/BAND] to select “FM” 
or “AM”.
2Press [6] or [5] to select the 
frequency of the required station.
TUNED: Displayed when a radio station is 
tuned.
ST: Displayed when a stereo FM broadcast 
is being received.
Press and hold [6] or [5] until the frequency starts 
scrolling to start automatic tuning. Tuning stops when a station 
is found.
3Adjust the volume.
∫If noise is excessive in FM
Press [FM MODE] to display “MONO”.
Press [FM MODE] again to cancel the mode.
The mode is also canceled when you changed the frequency.
∫FM frequency step
The step is factory-set to 0.2 MHz, but you can change it to receive 
broadcasts allocated 0.1-MHz steps.
1 Press [TUNER/BAND] to select “FM”.
2 Press and hold [TUNER/BAND].
After a few seconds the display changes to show the current 
minimum frequency. Continue to hold the button down. The 
minimum frequency changes and the step is changed.
To return to the original step, repeat the above steps.
[Note]
Any FM frequencies preset in channels will be changed by this
procedure. Preset them again.Preset channels to make selection simple.
Up to 15 stations can each be set in the FM and AM bands.
1Tune to “FM 87.9 MHz” or
“FM 87.5 MHz” (➡ left).
2Press and hold [ENTER].
Release the button when “FM AUTO” is displayed.
The tuner presets all the stations it can receive into the 
channels in ascending order.
“SET OK” is displayed when the stations are set. The last 
station to be set is then played.
3Tune to “AM 520 kHz”.
4Press and hold [ENTER].
∫“ERROR” is displayed
Presetting was unsuccessful. Preset manually.
1Tune to the station (➡ left).
2Press [ENTER].
3While “PGM” is flashing
Press the numbered buttons to select 
a channel.
Alternatively, press [:, X CH] or [9, CH W] then press 
[ENTER].
The station occupying a channel is erased if another station is preset 
in that channel.
1Press [TUNER/BAND] to select “FM” 
or “AM”.
2Press the numbered buttons or
[:, X CH] or [9, CH W] to select 
the channel.
To select a 2-digit number
Example: To select channel 12, press [S10] ➡ [1] ➡ [2]
Manual tuning
AV SYSTEM
SLEEP
FL DISPLAY
DIMMER
PLAY MODE
MIX 2CH
REPEAT
POSITION
MEMORYCANCEL
SKIP
CH
TOP MENU
DISPLAY
VOLUME
MUTING
S.SRND PL C.FOCUSC.S.M. SFCSUBWOOFER
LEVEL
FM MODE
SETUPZOOM GROUP AUDIO
RETURN
TV VOL 
sTV VOL r
DIRECT
NAVIGATORPLAY LISTMENU
SLOW/SEARCH
123
456
78
09
TUNER/BAND DVD/CD
TV VCR /AUX
ENTER
CH SELECT
TEST
TV/VIDEO
S10/ENTER
ENTER
SKIP
:  9 
X CH WSLOW/SEARCH
6  5
TUNER/BAND
FM MODE
VOLUME
j     i
Numbered
buttons
RDS PSPTYSLEEP
JPEGMP3 WMAAB
MONOTUNED ST
RDS PSPTYSLEEP
JPEGMP3 WMAGRPAB
MONO
Preset tuning
Automatic presetting
Manual presetting
Selecting channels
TRCKCHAPALLRNDPGM
TRCKCHAPALLRNDPGM 
						

							25
RQT6719
Sound field/sound quality operations
Sound field
≥Dolby Pro Logic, Super Surround, Center Focus and Subwoofer 
Level adjusting (➡ page 27) cannot be used if headphones are 
connected (“ERROR” appears on the display).
≥You may experience a reduction in sound quality when these 
sound field systems are used with some sources. If this occurs, 
turn the sound field system off.
≥Dolby Digital and DTS are digital encoding systems used on DVD 
to carry surround sound. Both were originally developed for use in 
cinemas.
≥This unit automatically recognizes and decodes these systems.
Play a Dolby Digital or DTS source.
The Dolby Digital or DTS indicator lights.
∫To down-mix Dolby Digital or DTS (multiple-
channel) signals to 2 channels
Press and hold [– MIX 2CH].
To cancel, press and hold [– MIX 2CH] again.
To check the current setting
Press [FL DISPLAY].
When “D.MIX” flashes on the display [DVD-A]
The DVD-Audio contains multiple-channel signals that cannot be 
down-mixed.Dolby Pro Logic is a decoding system that was developed to get a 
better sense of presence from sources encoded with Dolby 
Surround. The feeling of position has been improved by the addition 
of a separate center speaker channel.
Software encoded with Dolby Surround can be identified with this 
mark (DVD, CD, Video CD, Laser Disc, Video tape).
1Press [ÎPL].
2Play a Dolby Surround 
source.
To cancel
Press [ÎPL] again.
[Note]
This does not work when playing multi-channel Dolby Digital.
If the level of the speakers appears to be different while listening to a 
source, adjust the level of the speakers to the same apparent level.
Preparation
≥Press [DVD/CD].
1 Press and hold [– TEST] to output a test signal.
Lch: Front left
Cch: Center
Rch: Front right
RSch: Right surround
LSch: Left surround
2 Press [VOLUME, r] or [s] to set the volume level normally 
used for enjoying the source.
3 Press [3] (to increase) or [4] (to decrease).
L, R: j16 dB to 0 dB
C, RS, LS: j10 dB to i6 dB
To stop the test signal, press and hold [– TEST] again.
∫To adjust speaker level during play
1 Press [CH SELECT] to select the speaker. 
Lch>Cch>Rch>RSch>LSch>SWch
^--------------------------------------------------------------}
SWch: Subwoofer
≥You can only adjust SWch if the disc includes a subwoofer 
channel.
2 Press [3] (to increase) or [4] (to decrease).
L, R: j16 dB to 0 dB
C, RS, LS:j10 dB to i6 dB
SW: j10 dB to i10 dB
Dolby Digital and DTS
Software encoded with Dolby 
Digital can be identified with 
this mark.Software encoded with DTS 
can be identified with this 
mark.
AV SYSTEM
SLEEP
FL DISPLAY
DIMMER
PLAY MODE
MIX 2CH
REPEAT
CANCEL
SKIP
CH
TOP MENU
DISPLAY
VOLUME
MUTING
PL C.FOCUSSFCSUBWOOFER
LEVEL
FM MODE
SETUPZOOM GROUP AUDIO
RETURN
TV VOL 
sTV VOL r
DIRECT
NAVIGATORPLAY LISTMENU
SLOW/SEARCH
123
456
78
09
TUNER/BAND DVD/CD
TV VCR /AUX
ENTER
CH SELECT
TEST
TV/VIDEO
S10/ENTERPOSITION
MEMORY
S.SRND
C.S.M.
342 1
ENTER
–MIX 2CH
Î PL
DVD/CD
CH SELECT
–TEST VOLUME
j   i FL DISPLAY
PROG.CSM
AACC.FZOOM
PLSFCSSS
DTSDIGITAL
GRPTTLTRCKCHAPALLPGMRNDD.MIX
Dolby Pro Logic
Speaker level adjustments
PGPROG.CSM
AACDTSDIGITALC.FZOOM
SFCSSSPL 
						

							26
RQT6719
Sound field/sound quality operations
Sound field
Add surround effects to stereo sound.
Press [S.SRND].
Each time you press the button:
MUSIC>MOVIE>OFF
 ^--------------------------------}
≥You can adjust the volume of the surround speakers to get the best 
surround effect (➡ page 25, Speaker level adjustments).
[Note]
≥Turn Super Surround off when playing a DVD recorded with Dolby 
Digital or DTS. The surround effects will not be reproduced 
correctly if this is left on.
≥Dolby Pro Logic (➡ page 25) switches off.
Press [SFC] to select a setting.
Each time you press the button:
HEAVY:Adds punch to rock.
CLEAR:Clarifies higher sounds.
SOFT:For background music.
DISCO:Reverberates sound to make you feel like you were in a 
disco.
LIVE:Makes vocals more alive.
HALL:Expands sound to make you feel like you were in a hall.
FLAT:Canceled (no effect is added) (factory preset).
To check the current setting
Press [SFC].
You can make the sound of the center speaker seem 
like it is coming from within the television.
Press [C.FOCUS].
Each time you press the button:
CENTER FOCUS 1 (Normal)>CENTER FOCUS 2 (Enhanced)
 ^--------------=OFF(-------------}
≥This does not work when Super Surround is turned on.
≥This will have less effect when Dolby Pro Logic is turned on.
[DVD-A] [DVD-V] [VCD] [CD]
Store the sound settings for a disc so the unit recalls them the next 
time you play it. 
≥Number of discs: 30
≥Settings: Dolby Pro Logic, Subwoofer level, Center Focus, Sound 
Field Control, Super Surround
∫Store the settings
1Make the settings.
2Press and hold [C.S.M].
∫Recall the settings
The unit recalls the settings when you play the disc again.
≥The settings are replaced if you change them. 
≥When you store settings for a 31st disc, the earliest settings 
disappear.
≥Press [C.S.M] while “CSM” is lit and the settings return to those 
that were on before the settings are recalled.
≥Press [C.S.M] while “CSM” is out and you are playing a disc for 
which you stored settings and those settings are recalled.
Super Surround
AV SYSTEM
SLEEP
FL DISPLAY
DIMMER
PLAY MODE
MIX 2CH
REPEAT
POSITION
MEMORYCANCEL
SKIP
CH
TOP MENU
DISPLAY
VOLUME
MUTING
S.SRND PL C.FOCUSC.S.M. SFCSUBWOOFER
LEVEL
FM MODE
SETUPZOOM GROUP AUDIO
RETURN
TV VOL 
sTV VOL r
DIRECT
NAVIGATORPLAY LISTMENU
SLOW/SEARCH
123
456
78
09
TUNER/BAND DVD/CD
TV VCR /AUX
ENTER
CH SELECT
TEST
TV/VIDEO
S10/ENTER
S.SRND
SFC
C. FOCUS
C.S.M
PROG.CSM
AACDTSDIGITALC.FZOOM
S.SRND
Sound Field Control
Center Focus
Custom Sound Memory — Store the 
sound settings
PROG.CSM
AACDTSDIGITALC.FZOOM
SFC
PROG.CSM
AACDTSDIGITALZOOM
PLSFCSSSC.F
PROG.CSM
AACDTSDIGITALC.FZOOM 
						

							27
RQT6719
Sound field/sound quality operations
Sound quality
Press [SUBWOOFER LEVEL].
Each time you press the button:
SUB W 1>SUB W 2>SUB W 3>SUB W 4 (factory preset)
 ^--------------------------------------------------------------}[RAM] [DVD-A] [DVD-V] [CD]
Discs recorded with 2-channel LPCM at 44.1 kHz or 48 kHz
This feature gives you a more natural sound by adding the higher 
frequency signals not recorded on the disc.
[WMA] [MP3]
Discs recorded at 44.1 kHz or 48 kHz
This feature reproduces the frequencies lost during recording to give 
you a sound closer to the original.
1During play
Press [DISPLAY] until the unit 
information screen is displayed
(➡ page 22).
2Press [3, 4] to select the audio 
menu.
3Press [2, 1] to select “Re-master”.
4Press [3, 4].
Each time you press the button:Adjusting the bass
AV SYSTEM
SLEEP
FL DISPLAY
DIMMER
PLAY MODE
MIX 2CH
REPEAT
CANCEL
SKIP
CH
TOP MENU
DISPLAY
VOLUME
MUTING
PL C.FOCUSSFCSUBWOOFER
LEVEL
FM MODE
SETUPZOOM GROUP AUDIO
RETURN
TV VOL 
sTV VOL r
DIRECT
NAVIGATORPLAY LISTMENU
SLOW/SEARCH
123
456
78
09
TUNER/BAND DVD/CD
TV VCR /AUX
ENTER
CH SELECT
TEST
TV/VIDEO
S10/ENTERPOSITION
MEMORY
S.SRND
C.S.M.SUBWOOFER
LEVEL
342 1
ENTER
DISPLAY
GRPTTLTRCKCHAPALLPGMRNDD.MIX
Re-master—
Enjoying more natural sound
Setting[RAM] [DVD-A] [DVD-V] [CD]
Type of music[WMA] [MP3]
Effect level
1 High tempo (e.g., pops and 
rock)Light
2 Various tempos (e.g., jazz) Medium
3 Low tempo (e.g., classical) Strong
OFF Off Off
OFFOFF/48kHz
Re-master 
						

							28
RQT6719
Other functions
Convenient functions
Press [MUTING].
Volume is reduced to minimum.
To cancel
Press [MUTING] again or reduce the volume to minimum (– – dB), 
then raise it to the required level.
Muting is also canceled when you switch the unit to standby.
Press and hold [– DIMMER].
To return to the original brightness, press and hold [– DIMMER] 
again.
The display also returns to the original brightness when you switch 
the unit to standby.This timer turns the unit off after a set time.
Press [SLEEP] to select the time 
(minutes).
Each time you press the button:
SLEEP 30_--)SLEEP 60_--)SLEEP 90
  ^-=SLEEP OFF(=SLEEP 120(_}
To cancel the timer
Press [SLEEP] to select “SLEEP OFF”.
To check the SLEEP setting
Press [SLEEP] once.
≥The time remaining appears.
To change the setting
Press [SLEEP] to display the remaining time, then press again to 
select the required time.
1Reduce the volume and connect the 
headphones (not included).
Headphone plug type: 3.5 mm (1/8z) stereo
2Adjust headphone volume with 
[VOLUME].
Audio is automatically switched to stereo (2-channel).
[Note]
Avoid listening for prolonged periods of time to prevent hearing 
damage.
Muting the volume
Dimming the display
AV SYSTEM
SLEEP
FL DISPLAY
DIMMER
PLAY MODE
MIX 2CH
REPEAT
POSITION
MEMORYCANCEL
SKIP
CH
TOP MENU
DISPLAY
VOLUME
MUTING
S.SRND PL C.FOCUSC.S.M. SFCSUBWOOFER
LEVEL
FM MODE
SETUPZOOM GROUP AUDIO
RETURN
TV VOL 
sTV VOL r
DIRECT
NAVIGATORPLAY LISTMENU
SLOW/SEARCH
123
456
78
09
TUNER/BAND DVD/CD
TV VCR /AUX
ENTER
CH SELECT
TEST
TV/VIDEO
S10/ENTER
MUTING –DIMMER
SLEEP
VOLUME
j  i 
GRPTTLTRCKCHAPALLPGMRNDD.MIXPG
The sleep timer
Using headphones
TUNED
RDS PSPTYSLEEP
JPEGMP3 WMAGRPTTLTRCKCHAPALLPGMRNDD.MIXPGPROG.CSM
AACDTSDIGITALC.FZOOM
AB
STMONO
SFCSSS
Í/IPROGRESSIVE OUTPHONESDOWN
VOLUMESEARCH
UPÍSELECTOR
VOLUME 
						

							29
RQT6719
Other functions
Changing settings
This chart shows the settings for this unit. Change the settings to suit your preferences and to suit the unit to the environment in which 
it is being used. These settings are retained in memory until they are changed, even if the unit is turned off. See page 30 for details on 
menu operation.
≥Underlined items are the factory preset.
Menus Items Options
Disc
Audio
Choose the preferred audio language.EnglishFrench Spanish Original Other ¢¢¢¢
Original: The original language of each disc will be 
selected.
Other ¢¢¢¢: Input a code number with the numbered 
buttons (➡ page 31).
Subtitle
Choose the preferred subtitle language.Automatic
English French Spanish Other ¢¢¢¢
Automatic: If the language selected for “Audio” is not 
available, subtitles of that language will 
automatically appear if available on that disc.
Menus
Choose the preferred language for disc menus. English
French Spanish Other ¢¢¢¢
Ratings (➡ page 30)
Set a ratings level to limit DVD-Video play.
≥The password screen is shown if you choose levels 0 to 7 
or if you choose “Ratings” when levels 0 to 7 have been 
selected.
≥Select “Level 0” to prevent play of discs that do not have 
ratings levels recorded on them.Setting ratings (When level 8 is selected)
8 No Limit:
All DVD-Video can be played.
1 to 7:   Prohibits play of DVD-Video with corresponding 
ratings recorded on them.
0 Lock All:  Prohibits play of all DVD-Video.
Changing ratings (When level 0 – 7 is selected)
Unlock Player Change Level
Change Password Temporary Unlock
VideoTV Aspect (➡ page 11)
Choose the setting to suit your television and preference.4:3 Pan&Scan4:3 Letterbox 16:9
TV Type (➡ page 11)
Select to suit the type of television.Standard (Direct View TV)
CRT Projector LCD TV/Projector
Projection TV Plasma TV
Still Mode
Specify the type of picture shown when paused.Automatic
Field Frame
Black Level Control
Change the black level of the picture if you connected a 
television through the COMPONENT VIDEO OUT 
terminals.Lighter
: when connected to a TV through the VIDEO OUT 
or S VIDEO OUT terminal.
Darker: when connected to a TV through the 
COMPONENT VIDEO OUT (Y/P
B/PR) terminals.
AudioSpeaker Setting (➡ page 30)
Set the delay time for your center and surround speakers.Multi-channel
Center: 0
/1.3/2.6/3.9/5.3 ms
Surround (L/R): 0/5.3/10.6/15.9 ms
Dynamic Range Compression (Dolby Digital only)
Change the dynamic range for late night viewing.Off
On: For clear dialog when listening at low volume.
Audio during Search
Choose whether to have sound during search. On
Off
≥This feature doesn’t work for some discs.
DisplayMenu Language
Choose the preferred language for these menus and the on-
screen messages.EnglishFrançais Español
On-Screen Messages
Choose whether to show on-screen messages or not.On
Off
OthersDVD-Video Mode
Select how to play pictures contained on some DVD-Audio.
The setting returns to “Off ” when you remove the disc, turn 
the unit off or change the source.Off: DVD-Audio are played as DVD-Audio.
On: DVD-Video contents found on DVD-Audio can be 
played.
QUICK SETUP (➡ page 11)
Answer questions to make basic settings.Yes (Menu language, Audio language, Subtitle language, 
TV type, TV aspect)
No 
						

							30
RQT6719
Other functions
Changing settings
See page 29 for menu and option details.
Preparation
Press [DVD/CD].
1Press [SETUP] to show the menus.
2Press [2, 1] to select the menu’s tab.
The screen changes to display the menu.
3Press [3, 4] to select the item you 
want to change and press [ENTER].
4Press [3, 4, 2, 1] to select the 
option and press [ENTER].
The screen now shows the menu again.
To return to the previous screen
Press [RETURN].
When you are finished
Press [SETUP].[DVD-V]
The password screen is shown when you select levels 0 to 7.
1 Input a 4-digit password with the numbered buttons and press 
[ENTER]. 
≥If you enter a wrong number, press [CANCEL] to erase it before 
you press [ENTER].
≥The lock symbol appears closed to show the rating is locked.
≥Do not forget your password.
2 Press [ENTER] to confirm the 4 digits.
[DVD-V]
(Center and surround speakers only)
For optimum listening with 5.1-channel sound, all the speakers, 
except for the subwoofer, should be the same distance from the 
seating position. If you have to place the center or surround 
speakers closer to the seating position, adjust the delay time to 
make up for the difference.
1 Press [3, 4, 2, 1] to select the delay time box and press 
[ENTER].
2 Press [3, 4] to adjust the delay time and press [ENTER].
Values 
If distance a or b is greater than or equal to distance c, set to “0”. 
If distance a or b is less than distance c, set as follows. 
aCenter speaker
bSurround speakers
When you are finished
Press [3, 4, 2, 1] to select “Exit” and press [ENTER].
Common procedures
Disc Video Audio Display Others
() () () ()
^------------------------------------------------------------------------------------------J
AV SYSTEM
SLEEP
FL DISPLAY
DIMMER
PLAY MODE
MIX 2CH
REPEAT
CANCEL
SKIP
CH
TOP MENU
DISPLAY
VOLUME
MUTING
PL C.FOCUSSFCSUBWOOFER
LEVEL
FM MODE
SETUPZOOM GROUP AUDIO
RETURN
TV VOL 
sTV VOL r
DIRECT
NAVIGATORPLAY LISTMENU
SLOW/SEARCH
123
456
78
09
TUNER/BAND DVD/CD
TV VCR /AUX
ENTER
CH SELECT
TEST
TV/VIDEO
S10/ENTERPOSITION
MEMORY
S.SRND
C.S.M.
342 1
ENTER
RETURN
SETUP
DVD/CD
CANCEL
Numbered
buttons
Disc
Audio
Subtitle
Menus
RatingsEnglish
English Automatic
Level 8
SETUP
SELECT
ENTER    RETURN
TA B
Entering a password (Ratings)
Now, when you insert a DVD-Video that exceeds the ratings limit 
you set, a message appears on the television.
Follow the on-screen instructions.
Changing the delay time (Speaker 
Setting)
Difference Setting
Approx. 50 cm (11/2 feet)1.3 ms
Approx. 100 cm (3 feet) 2.6 ms
Approx. 150 cm (5 feet) 3.9 ms
Approx. 200 cm (6 feet) 5.3 ms
Difference Setting
Approx. 200 cm (6 feet) 5.3 ms
Approx. 400 cm (12 feet) 10.6 ms
Approx. 600 cm (18 feet) 15.9 ms
SETUP
SELECT
ENTER  RETURN
m s
m s L
Exit
LSR
SW
C
RS 0  0
Center delay time
Exit
Surround delay time
LSRS
LR
SW
bc
a C