Panasonic DVD Stereo System Sc Pm91 Operating Instructions

							
11
RQT7932

Control guide: remote  control
Control guide: remote control
 CLOCK/TIMER, SLEEP (➡ 9, 27, 28)
^, TV ^ (➡ 9, 29)
H.BASS, SUBWOOFER (➡ 26, 30)
DISC, ALL DISC,  disc buttons 1 to 5 (➡ 13)
GROUP (➡ 13) 
REPEAT (➡ 14)
 PLAY MODE (➡ 14, 23)
g, STOP (➡ 12, 24) QUICK REPLAY (➡ 13)
 TUNER/AUX (➡ 23, 29)
TAPE q, * REC (➡ 24, 25)
TOP MENU, DIRECT NAVIGATOR  (➡ 13, 17)
FUNCTIONS, QUICK OSD (➡ 18, 20)
u i, 2/REW, 1/FF, SETUP, CANCEL (➡ 9, 12, 23, 24)
MUTING, TV/VIDEO (➡ 27, 29)
z PLAY/REC, AUTO OFF (➡ 27, 28)
DISPLAY, DIMMER (➡ 9, 27)
SURROUND, M.RE-MASTER (
➡  26, 27)SOUND, A.ONLY (➡  26, 27)
Numbered buttons
PGM (➡ 15, 23)
h, PAUSE (➡ 12)
CM SKIP (➡ 13)
DVD/CD q (➡ 12)
MENU, PLAY LIST (➡ 13, 16, 17)
e, r, w, q, ENTER
RETURN, ANGLE/PAGE (➡ 13, 14, 18)
t, y SLOW/SEARCH, TV CH 2, 1 (➡ 12, 23, 29)
–, +, VOLUME, TV VOL –, + (➡ 12, 29)SHIFTTo use functions labeled in orange:While pressing [SHIFT], press the corresponding button.

SCPM91D-Pbook.indb   113/17/2005   11:55:23 AM 
						

							
12
RQT7932

Discs — Basic play
Discs — Basic play
• If the disc contains both audio data (WMA and MP3) and JPEG,  select “All” to play both, “Audio” 
to play WMA/MP3, or “Picture” to play JPEG while the menu is displayed (except    o n ) . 
You can also access the menu by pressing [TOP MENU].
REC
DISCOPEN/CLOSEADVANCED
SURROUND
POWER
DISC
TUNER/AUX
DOWNUPVOLUME
CHANGE
12345
TAPE qDVD/CD qST OP gBASS/TREBLE
AC IN
DISC
CHECK
DEMO
H.BASS
DVD/CD q
DISCCHECK;, CHANGE
STOP g
VOLUME, UP, DOWN
;, DISC OPEN/CLOSE
Disc trays
1–5
1
  Open the disc tray.•  T h e   u n i t   t u r n s   o n  automatically  and  a  tray 
opens.
2
  Place disc.
•  Load  double-sided  discs  so  the l a b e l   f o r   t h e   s i d e   y o u   w a n t   t o 
play  is  facing  up.  (
➡   Tray/disc handling procedure, page 5)
 
•  R e m o v e   T Y P E   2   a n d   4   d i s c s from their cartridges before use.
Read  the  instructions  for  the 
disc carefully.
3
  Close the disc tray.
4
  Start play.
•  I t   m a y   t a k e   s o m e   t i m e 
for  play  to  start  but  this  is 
normal.
Volume adjustment 
Stop
The stopped play position is memorized when “RESUME” is displayed.
•  Press [DVD/CD q] to resume play.
•  Press [g, STOP] to clear the position.
Pause  •  Press [DVD/CD q] to restart play.
Skip
Label must face upward.
Disc trayTray number
Search(during play)• Up to 5 steps.• Press [DVD/CD q] to restart play.
Slow-motion • Up to 5 steps.• Press [DVD/CD q] to restart play.•              Motion picture parts only.•           Forward direction only.
Frame-by- frame(during pause)
•              Motion picture parts only.•           Forward direction only.
•  P r e s s i n g   [h, P A U S E ]   a l s o activates forward direction.• Press [DVD/CD q] to restart play.
1
DVD/CD
VOLUME
STOP
DVD-AVCD
DVD-AVCD
RAM
JPEGRAM

SCPM91D-Pbook.indb   123/17/2005   11:55:27 AM 
						

							
13
RQT7932

Discs — Basic play
Selecting a group
 
Group skip 
All disc play(during stop)•  ALL DISC ON  ALL DISC OFF
•  DVD discs and JPEG tracks are skipped.
•  HighMAT  menus  and  video  CD  playback  control  are 
disabled.
Changing a disc in the desired tray
Press [ ;,CHANGE] again to close the tray.
•  You  can  also  remove  a  disc  w h i l e   a n o t h e r   i s   p l a y i n g 
(except  in  all-disc  random, 
p r o g r a m   p l a y   o r   d u r i n g 
recording).
Checking the disc location
Press again to close the tray.
This feature lets you check whether a 12 cm disc is in a tray.
•  I f   a   d i s c   i s   b e i n g   p l a y e d ,   t h e 
corresponding tray will not open.
•  D o   n o t   r e m o v e   o r   i n s e r t   d i s c s 
during a disc check.
•  Do  not  pull  out  the  trays  during  a 
disc check.
Discs — Basic play
Enter number
    
Example: To select 12:[>=10] ➡ [1] ➡ [2]         with playback control
•  Press  [g ,  STOP]  then  press  the numbered buttons.
Example: To select 123:[1] ➡ [2] ➡ [3] ➡ [ENTER]
•  P r e s s   [ S H I F T ] + [ C A N C E L ]   t o 
cancel the number(s).
Disc menu
  
Shows a disc top menu
Shows a disc menu
Shows a disc menu
On-screen item select
Return to previous screen
Skip back a few seconds(during play) •  This  may  not  work  while  playing 
some  parts  of  a  disc  or  at  all  with 
some discs (only when the elapsed play time can be displayed).
Skip 60 seconds forward(during play) •  This  may  not  work  while  playing 
some  parts  of  a  disc  or  at  all  with 
some discs (only when the elapsed play time can be displayed).
Selecting a disc
Select
Select
Select
•  Multiple-channel signals are down-mixed to stereo (2-channel) (
➡ Home theater—Enjoying more powerful sound, page 29).
•  When playing VCDs with playback control (PBC)
  Pressing buttons to perform skip, search or slow-motion may take you to a menu screen.
•  Lights when a Dolby Digital or DTS disc is played.
 
Confirm Confirm
or
Confirm
Select
Confirm
or
QUICK REPLAY
CM SKIP
RAMDVD-ADVD-VVCDCD
WMAMP3JPEG
VCD
DVD-ADVD-V
DVD-V
VCD
DVD-AWMAMP3JPEG
WMAMP3JPEG

SCPM91D-Pbook.indb   133/17/2005   11:55:31 AM 
						

							
14
RQT7932

Discs — Convenient functions
Soundtracks
   
(Discs with multiple soundtracks)
During playPress [FUNCTIONS] then [e, r] to select “Audio”.Use the Functions menu to change the soundtrack to the one you want (➡ Audio, page 18).
 
You can also select “L”, “R” or “L R”.(Karaoke discs: You can also switch the vocals on and off. Read the disc’s instructions for details.)
Play restarts from the beginning of the soundtrack when changing soundtracks that are accompanied by still pictures.
Audio attributesLPCM/PPCM/%Digital/DTS/MPEG: Signal typekHz: Sampling frequencybit: Number of bitschannel: Number of channelsExample:3 /2 .1ch1: Low frequency effect (not displayed if there is no signal)
0: No surround1: Mono surround2: Stereo surround (left/right)
1: Center2: Front left + Front right3: Front left + Front right + Center
Subtitles
 (Motion picture parts only) (Discs  with  multiple  subtitle  languages)  (SVCD only)During playPress [FUNCTIONS] then [e, r] to select “Subtitle”.Use the Functions menu to switch the subtitles on and off and to change the language to the one you want (➡ Subtitle, page 18).
You can only switch the subtitles on or off.
To change the subtitle position and brightness (➡ Display Menu, page 19).
Angles and pages
During play
 (with multiple angles) Press to select the angle.  Press to rotate the picture. 
Press to change the pages. 
Discs — Convenient functions
Repeat play
(Only when the elapsed play time can be displayed  : Works with all JPEG contents.)During playPress [REPEAT] to select an item to be repeated.For 1-disc play
PG REPEAT#1 → DISC REPEAT → REPEAT OFF
•  During play list play
SCENE REPEAT → PL REPEAT#2 → REPEAT OFF
CHAPTER REPEAT → TITLE REPEAT#3 → REPEAT OFF 
TRACK REPEAT → DISC REPEAT → REPEAT OFF
TRACK REPEAT → GROUP REPEAT#3 → REPEAT OFF 
CONTENT REPEAT → GROUP REPEAT#3 → REPEAT OFF
GROUP REPEAT#3 → REPEAT OFF
•  You can also repeat play of content and group on HighMAT discs.
For All-disc play (➡ page 13) 
TRACK  (or  CONTENT)  REPEAT  → 
DISC  (or  GROUP)  REPEAT → ALL CD’S REPEAT → REPEAT OFF
To repeat only your favorite tracks, contents or chaptersStart program play (➡ Program play, page 15) and press [REPEAT] to select the repeat mode.
#1 Program repeat (➡  Playing the programs on DVD-RAM, page 17).#2 Play list repeat (➡ Using the play lists on DVD-RAM, page 17).#3 During program and random play“ALL REPEAT” is displayed.
Random play
 During stop
1  Press [PLAY MODE] to show the Random Playback screen.
2  (  )
  Press the numbered buttons to select a group  ( then press [ENTER]) or a title.  Example: 
•  You can select more than one group or all groups.
•  To deselect a group, select the group again.
3  Press [DVD/CD q].
•  During  random  play  in  All  Disc  play,  empty  trays  are  skipped  and  the playback control function on Video CDs is canceled.
•  During  random  play,  this  unit  can  access  up  to  4000  audio  or  picture 
contents and 400 groups.
•   If you select bonus groups, you will have to enter a password.•  For HighMAT discs, select “Play as Data Disc” (➡ Other Menu, page 19) to use random play.
➡ Page 11 for the position of the remote control buttons.
RAMDVD-ADVD-VVCD
RAMVCD
DVD-A
DVD-ADVD-VVCD
RAM
DVD-A
DVD-V
JPEG
JPEG
RAM
DVD-V
VCDCD
DVD-A
WMAMP3
JPEG
WMAMP3VCDCD
DVD-VVCDCDDVD-AWMAMP3JPEG
DVD-VDVD-AWMAMP3JPEG
WMAMP3JPEGDVD-V
PLA Y   to start0  ~ 9  to select 
Choose a title.Title    1
Random Playback
DVD-A
Note
DVD-A

SCPM91D-Pbook.indb   143/17/2005   11:55:32 AM 
						

							
15
RQT7932

Discs — Convenient functions
Discs — Convenient functions
Program play (up to 32 items)
During stop
1 Press [PGM].  “PGM” appears.
2 Press the numbered buttons to select the 
items ( then press [ENTER]).•  Repeat  this  step  to  program other items.• To select an item using the cursor buttons
  Press  [ENTER]  and  [e, r]  to  select  an  item,  then  press  [ENTER] 
again to confirm the number.
3 Press [DVD/CD q] to play.
During stop
1  Select ALL DISC ON (➡ page 13).
2  Follow the steps above.  Select the discs in step 2.
•  To exit the program mode
  Press [PGM] so “PGM” goes out.
  Press [PGM] again to go back to the program.
•  To add or change the program
  Press [
e, r] to select an available item, then repeat step 2.
•  To clear the whole program
  Select “Clear all” and press [ENTER].
•  To clear an item
  Press [SHIFT]+[CANCEL], or select “Clear” and press [ENTER].
•  To skip a page
  Press [SHIFT]+[ANGLE/PAGE].
•  Clear the existing program before creating a new program.
•  Times are not displayed while programming.
•  Items the unit cannot find can be programmed but are canceled during  play.  This  is  also  the  case  if  you  program  discs  other  than  Video  CD 
and CD.
•  The  program  is  cleared  when  you  switch  the  unit  to  standby,  select 
another source, or move the disc out of the play position.•  If you select bonus groups, you will have to enter a password.•  For HighMAT discs, select “Play as Data Disc” (➡ Other Menu, page 19) to use program play.
Example: Program Playback
PlayNo. Disc
Choose a title and chapter.T/G C/ T1
Clear
Clear all
to select and press   ENTERPLAY    to start
--
DVD-V
Programming from a single disc
DVD-VVCDCDDVD-AWMAMP3JPEG
Programming from multiple discs
VCDWMAMP3JPEG
Note
DVD-A
WMAMP3JPEG

SCPM91D-Pbook.indb   153/17/2005   11:55:33 AM 
						

							
16
RQT7932

Playing data discs 
•  You  can  play  JPEG  files  on  DVD-RAM  or  play  HighMAT  discs  without using the HighMAT function (➡ Other Menu, page 19).
•  Only  a  content  list  appears  when  playing  CDs,  but  information  for  CD-
Text discs is correctly displayed.
■ Using navigation menus
1 Press [MENU].
2 Press [e, r, w, q] to select the group or audio/picture content and press [ENTER]. 
• To play WMA/MP3 while showing JPEG images First select the JPEG file you want to show, then select the WMA/MP3 
file(s).
•  To skip a page
  Press [SHIFT]+[ANGLE/PAGE].
• To exit the screen
  Press [MENU].
Using the submenu 
1 While the navigation menu is displayed, press [FUNCTIONS].Example (actual items depend on the disc)
2 Press [e,r] to select the item and press [ENTER].
•  To return to the menuPress [RETURN].
Discs — Using navigation menus
Discs — Using navigation menus
■ Finding a track or group title
To find a group: 
highlight one of the group names
To find content: highlight an item in the content column1  Select “Find” in the submenu. 
2  Press [
e,r] to select a character and press [ENTER].• Repeat to enter other characters.• Lower case is also searched.• Press [t, y] to skip between A, E, I, O, and U.• Press [w] to erase a character.
• Erase the asterisk (★) to search only for the titles starting with that word.
3  Press [q] to select “Find” and press [ENTER].  The search results screen appears.4  Press [e,r] to select the content or group and press [ENTER].
Playing HighMAT discs
 
A menu appears when you select the disc.Press [e, r, w, q] to select then press [ENTER].When you press [ENTER]:
•  To display the screen
Press [TOP MENU].
•  To return to the menu above the current one
Press [RETURN].
•  To change the menu background
Press [FUNCTIONS].The background changes to the one recorded on the disc.
•  To exit the screen
Press [g, STOP].
Selecting from the lists
1 During play  Press [MENU].
Playing
2 Press [w] then [e, r] to switch between the play list, group and content lists.
3 Press [q] then [e, r] to select an item and press [ENTER].
•  To skip a page
  Press [SHIFT]+[ANGLE/PAGE].
•  To exit the list screen
Press [MENU].
Menu:
Play list: 
Takes you to the next menu which shows play lists or another menu.
Play starts.
Navigation Menu        1           5          MP3      1:54Lirkin Park -  Meteora / Lirkin  Park [Hybrid  Theory]  09  -   A Pl
Sep 2004 Highland Tour 
The Ultimat
e
FUNCTIONS  to display the sub menuRETURN   to exitGroup 001/002 Content 0005/0010
GGCC
 img00001_genting Don't Stay Faint Hit The Floor -  Abyss Lirkin Park [Hyorid  Theor Lirkin Park Cure For  The
 L irkin Park  -  Meteora 
 L irkin Park  -  Meteora 
 L ying From  You Somewhere I Belong
Group and content number currently playing
JPEG files
WMA/MP3 files
ContentGroup
➡ Page 11 for the position of the remote control buttons.
CDWMAMP3JPEG
WMAMP3JPEG
M ulti
List
T ree
Thumbnai
l
Next group
Previous group
Al
l
Audi
o
P icture
Help displa
y
F ind
Show groups and content
Show content
Show groups
Show thumbnails 
Go to next group  
Go to previous group  
List both WMA/MP3 and JPEG files
List WMA/MP3 files only
List JPEG files only
Show help bar or the elapsed play time indicator
Enter a title to find content and groups (➡ below)
JPEG
WMAMP3
WMAMP3
WMAMP3JPEG
WMAMP3JPEG
Playlist
1    Love Me Do
2    From Me to  You
3    She Loves  You
4    I  Want to Hold Your Hand
5    Can't Buy Me Love
No.                   Content title
GROUP
CONTENTPLAYLIST
All by ArtistThe Beatles
RETURN    to exit0  ~ 9   to select      ENTER   to play
Example: WMAMP3JPEG

SCPM91D-Pbook.indb   163/17/2005   11:55:35 AM 
						

							
17
RQT7932

Discs — Using navigation menus
Discs — Using navigation menus
•  Noise may occur when playing WMA files.
•  You cannot play WMA files that are copy protected.
•  This unit is not compatible with ID3 tags.
•  If  you  play  an  MP3  track  that  includes  still  picture  data,  it  will  take some time before the music itself starts playing and the elapsed time 
will  not  be  displayed  during  this  time.  Even  after  the  track  starts,  the 
correct play time will not be displayed.
•  To view JPEG files on this unit: — Take  them  on  a  digital  camera  that  meets  the  DCF  (Design  rule  for  Camera  File  System)  standard.  Some  digital  cameras  have 
functions that are not supported by the DCF standard like automatic 
picture rotation which may render a picture unviewable.
— Do  not  alter  the  files  in  any  way  or  save  them  under  a  different 
name.
•  This  unit  cannot  display  moving  pictures,  Motion  JPEG  and  other  such  formats,  still  pictures  other  than  JPEG  (i.e.  TIFF)  or  play 
associated sound. (CD text only)When making your own CD text discsThe unit plays the tracks in the order you record them so you do not 
have to prefix the titles with numbers.
Tips for making WMA/MP3, CD text and JPEG discs
•  Discs  must  conform  to  ISO9660  level  1  or  2  (except  for  extended 
formats).
•  This  unit  is  compatible  with  multi-session  but  if  there  are  a  lot  of  sessions  it  takes  more  time  for  play  to  start.  Keep  the  number  of 
sessions to a minimum to avoid this.
•  The  order  in  which  the  tracks  appear  in  the  menus  may  differ  from 
the order shown on your computer.
Naming folders and files
At the time of recording, prefix folder and 
file names with 3-digit numbers in the order 
you want to play them (this may not work at times).Files must have the extension:“.WMA” or “.wma”“.MP3” or “.mp3”“.JPG”, “.jpg”, “.JPEG” or “.jpeg”
001
root
track
trac
k
track
track
tracktracktracktrack
tracktrack
group
group
group
Example: 
Playing the programs on DVD-RAM
1 Press [DIRECT NAVIGATOR] to show the program list.
2 Press [e, r] or the numbered buttons to select the item.  The  selected  program  plays in the background.
3 Press [ENTER] to 
confirm.
•  Titles appear only if you have entered them.
•  You cannot change program and disc titles.
•  Press [
q] to show the contents of the program.
•  To skip a page
  Press [SHIFT]+[ANGLE/PAGE].
Indication on the unit's display.PG: Program number
Using the play lists on DVD-RAM
You can play the groups of scenes (play lists) created on DVD video recording equipment.
1 Press [PLAY LIST] to show the play list menu.
2 Press [e, r] or the numbered buttons to select the item.
3 Press [ENTER] to confirm.
•  You can only select a play list if the disc contains play lists.
•  To skip a page
  Press [SHIFT]+[ANGLE/PAGE].
Indication on the unit's display.PL: Play list number
1    11/   1(WED)  12:05  Friends of a feather2     1/   1(MON)    1:05  Sunny day3     2/   2(TUE)     2:21  Penguins habitat4     3/   3(WED)    3:37  Irresistible5     4/ 10(THU)   1 1:05  Hot cakes
No.       Date               On                     
T
itle                      Contents
RETURN   to exit0  ~ 9  to select
DIRECT NA VIGATOR
1     11/   1   0:00:01  I'm only a woman2      1/   1   0:01:20  Sunny day3      2/   2   1:10:04  Breathless4      3/   3   0:10:20  Irresistible5      4/ 10   0:00:01  Hot cakes
No.  Date      Length                  Title                            
RETURN   to exit0  ~ 9  to select and press    ENTER
Playlist
WMA
MP3
JPEG
CD

SCPM91D-Pbook.indb   173/17/2005   11:55:36 AM 
						

							
18
RQT7932

To get disc information or to play from a specified item
1
Show the 
FUNCTIONS 
screen
2
Select the menu.
3
Make the settings.
4
Press to exit.
Actual items depend on the disc.        Example:
ENTERENTER
Discs — Using On-screen menus
Discs — Using On-screen menus
Select
Return to the previous menu
Go to the next menu
ConfirmSelectSelect
Confirm
Program, Group, Title, Track, Chapter, Play list, ContentTo start from a specific item.
TimeTime Slip (during play)   To skip the time forward or backward.1. Press [ENTER] to select Time Slip.2. Press [e, r] to select the time and press [ENTER].
•  Press and hold [e, r] to alter faster.Time Search   To start from a specific time.Elapsed/Remaining Time     To change between elapsed or remaining time display.
Audio(➡ Soundtracks, page 14).
Subtitle(➡ Subtitles, page 14)
Marker (VR) To recall a marker recorded on DVD-Video recorders.
Still Picture To view the still pictures.Next PicturePrevious Picture
Angle           (Discs with multiple angles)To select the angle. (➡ Angles and pages, page 14)
Thumbnail To show thumbnail images.Rotate Picture (➡ Angles and pages, page 14)Slideshow To turn the slideshow on or off.To change the timing (0–30 seconds) of the slideshow.
Other Settings—Play Speed                     (Motion picture parts only) To change play speed– from x0.6 to x1.4 (in 0.1 unit steps)
•  After you change the speed:
  Digital output switches to PCM-2ch.
•  Sound is stereo as long as “Normal” is selected.
➡ Page 11 for the position of the remote control buttons.
Other Settings
1/4Chapter 1/20Time0:00:00Audio1 EnglishSubtitleOffMarker (VR)Still Picture3Angle 1/1ThumbnailRotate PictureSlideshowOff
TitlePlay MenuPicture MenuAudio MenuDispla y MenuOther Menu
Play Speed
Functions
RAMDVD-VDVD-A
RAMDVD-VDVD-A
RAMDVD-VVCDCDDVD-A
RAM
DVD-A
DVD-V
JPEG
JPEG
JPEG
RAMDVD-ADVD-V

SCPM91D-Pbook.indb   183/17/2005   11:55:37 AM 
						

							
19
RQT7932

Discs — Using On-screen menus
Discs — Using On-screen menus
Play Menu
Repeat(➡ Repeat play, page 14)A-B Repeat      Except still picture part on          .Repeat a section between points A and B within an item.
[ENTER] (start point) ➡ [ENTER] (finish point)To cancel: [ENTER]• A-B repeat cancels when you press [QUICK REPLAY].Marker    To mark a position to play again (Marker).
•  Press  [q]  to  highlight  the  first  asterisk  and  press  [ENTER] again to mark a position.You can mark up to 5 positions.To mark another position: [w, q] ➡ [ENTER]To recall a marker: [w, q] ➡ [ENTER]To erase a marker: [w, q] ➡ [SHIFT]+[CANCEL]
•  This feature does not work during program and random play.
Advanced Disc Review To start Advanced Disc Review. For details, ➡ Advanced Disc Review, page 21.
Picture Menu
Picture Mode    NormalCinema1:  Mellows images and enhances detail in dark scenes.Cinema2:  Sharpens images and enhances detail in dark scenes.AnimationDynamicUser: Enables settings you make in “Picture Adjustment”.Picture AdjustmentContrast    Brightness    Sharpness    Color  Gamma (Adjusts the brightness of dark parts.)Depth Enhancer
•  Reduce  the  rough  noise  in  the  background  to  give  a  greater 
feeling of depth.
Video Output Mode    To switch between Progressive (480P) and Interlace (480I) video.Transfer Mode   If you have chosen “480p” (➡ see above), select the method of conversion for progressive output to suit the type of material.Auto1: For viewing film materialAuto2:  For  viewing  film  material  (the  same  as  Auto  1,  but  able to convert 30-frame-per-second progressive video)Video: For video material
Audio Menu
Advanced Surround(➡ Advanced Surround, page 26)Dialogue Enhancer
(Dolby Digital, DTS, 3-channel or over, where the dialogue is recorded in the center channel)This makes the dialogue in movies easier to hear.On  Off (Factory preset)
•  This does not work or has less effect with some discs.
Multi Re-master(➡ Multi Remaster–Enjoying more natural sound, page 27)Sound Enhancement      Enhances audio output to produce a warm hall-like sound.
Display Menu
Subtitle Position 0 to –60 in 2 unit steps.Subtitle Brightness “Auto” to automatically adjust the brightness against the background, or 0 to –7.Information           : Off, Date, Details                  (HighMAT only): Off, On4:3 Aspect     To select how to show images made for 4:3 aspect screens on a 16:9 aspect television.(Go to “Video” tab in the Setup menus, and select “16:9” for “TV Aspect” (➡ page 21).)Normal: Laterally stretches images.Auto: Expands 4:3 letterbox images to fill more of the screen. Other images appear in full in the center of the screen.Shrink: Images appear in the center of the screen.Zoom: Expands all images to fill the screen.If your television has a similar feature, use it instead for a better effect.Just Fit Zoom                     (motion picture parts only)  Preset zoom ratios suitable for the following video formats are available.
Auto   
4:3 Standard   
European Vista   
16:9 Standard American Vista Cinemascope1 Cinemascope2 Manual Zoom                     (motion picture parts only)  Fine adjustmentsPress [e, r].Bit Rate Display                     (motion picture parts only)  When you select “On”:During play: 
  shows the bitrate (approximate) of the video being played
During pause: 
  shows  the  data  volume  of  the  frame  and  type  of  picture 
(➡  Glossary— I/P/B, page 31)GUI See-throughTo enable the on-screen menu to become translucent.GUI Brightness (–3 to +3)To adjust the brightness of the on-screen displays.
Other Menu
SetupOpen the Setup menu to change the player’s settings (➡ page 21).Play as DVD-Video or Play as DVD-Audio•  Select  “Play  as  DVD-Video”  to  play  DVD-Video  contents  of DVD-Audio.
Play as DVD-VR, Play as HighMAT or Play as Data Disc•  Select “Play as Data Disc” to play JPEG files on DVD-RAM or to play HighMAT disc without using the HighMAT menus.
RAMDVD-VVCDCDDVD-AWMAMP3
RAM
DVD-VVCDCDDVD-AWMAMP3JPEG
RAMDVD-V
RAMDVD-VVCDDVD-AJPEG
RAMDVD-VVCDDVD-AJPEG
RAMDVD-VVCDDVD-A
DVD-V
RAMDVD-VVCDCDDVD-AWMAMP3
4:31.66:116:91.85:12.35:12.55:1
DVD-V
DVD-V
JPEG
WMAMP3RAMDVD-VVCDDVD-AJPEG
RAMDVD-ADVD-VVCD
RAMDVD-ADVD-VVCD
RAMDVD-ADVD-VVCD

SCPM91D-Pbook.indb   193/17/2005   11:55:38 AM 
						

							
20
RQT7932

Discs — Using On-screen menus
Discs — Using On-screen menus
To show disc information and play position —  QUICK OSD
Press [SHIFT]+ [QUICK OSD] to show information about the disc playing.
Group1100:01:02TrackTime11Condition: play, pause or slow/search
Current playback itemElapsed play time
Current position
➡ Page 11 for the position of the remote control buttons.
RAMDVD-VVCDCDDVD-AWMAMP3
•  To exit the screenPress [SHIFT]+ [QUICK OSD].

SCPM91D-Pbook.indb   203/17/2005   11:55:39 AM