Panasonic Dvd Ra60 Operating Instructions Manual
Have a look at the manual Panasonic Dvd Ra60 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11 Basic operations RQT6270 Selecting groups to play [DVD-A] The tracks on DVD-Audio are divided into groups. How these groups are played differs with the disc so read the instructions that came with the disc for further details. 1Press [GROUP]. 2Press [ENTER]. 3Press the numbered buttons to select the track number and press [ENTER]. The selected group and track begin to play. Playing all the groups in succession (➡ page 12) Playing bonus groups Some discs contain bonus groups. To enjoy these groups you may have to enter a password. Refer to the disc’s jacket. 1. Press [GROUP] to select the bonus group and press [ENTER]. 2. Enter the 4-digit password with the numbered buttons and press [ENTER]. ≥If you enter the wrong password, you can erase a digit by press- ing [CANCEL]. 3. Press the numbered buttons to select a track and press [ENTER]. ≥The bonus group can be played as many times as you like after the password has been entered until the disc is removed from the unit. Selecting still pictures—Page Skip [DVD-A] Remote control only During play Press [PAGE]. To enjoy even higher quality sound—AUDIO ONLY [DVD-A] [DVD-V][VCD][CD] You can enjoy higher quality audio by stopping the video signal. Press [AUDIO ONLY].≥The AUDIO ONLY indicator on the main unit lights. ≥AUDIO ONLY is canceled if you press the button again or turn the unit off. The light goes out. Note ≥Video signals are output while the disc is stopped and when opera- tions such as searching are performed. The television screen can appear unusual while video signals are not being output. ≥The television may be distorted when video signals are turned on and off when you turn AUDIO ONLY on and off, but this is not a malfunction. Using headphones 1Set [PHONES] to “MIN” and connect the headphones (not included). Headphone plug type: 6.3 mm (1/4z) stereo 2Adjust headphone volume with [PHONES]. Note Avoid listening for prolonged periods of time to prevent hearing damage. Enjoying virtual surround effects with 2 speakers or headphones (ADVANCED SURROUND (V.S.S.)) [DVD-V][VCD] SP-V.S.S.: Dolby Digital, DTS, MPEG, Linear PCM, 2-channel or over only HP-V.S.S.: Dolby Digital, MPEG, Linear PCM, 2-channel or over only Use ADVANCED SURROUND (V.S.S.) (Virtual Surround Sound) to enjoy a surround-like effect if you are using 2 front speakers or head- phones. If you are playing a disc with surround effects recorded on it, the effect is broadened and sound seems to come from virtual speakers on either side. During play Press [SP-V.S.S.] or [HP-V.S.S.].Each time you press the button: SP 1/HP 1:Natural effect ; SP 2/HP 2:Emphasized effect ; SP OFF/HP OFF:Cancel (Factory preset) Note ≥Advanced Surround will not work, or will have less effect with some discs, even if you select “1” or “2”. ≥Turn off the surround sound effects on the equipment you have connected when using this effect. ≥Turn Advanced Surround off if it causes distortion. ≥ Output from this unit will be in stereo (two channels) when V.S.S. is on. CINEMA [DVD-A] [DVD-V][VCD] Remote control only You can enjoy better pictures by changing the picture quality. Press [CINEMA]. Each time you press the button: C:Cinema mode: Mellows movies, enhances detail in dark scenes. Indication on the unit’s display lights up. : ; N:Normal mode (Factory preset) You can make finer adjustments to the picture if desired (➡ page 18, Digital picture mode—User mode). ^-----------------} T1G1 The group number changes each time you press the button. The page changes each time you press the button. e.g. Page 1 Optimum seating position A Speaker Speaker 3 to 4 times distance A O OO O OWhen using the television’s speakers N NN N N Distance Al Television’s width Seating position PAGE 1
Advanced operations RQT6270 12 Changing the play sequence Random play [DVD-A] [VCD] [CD] Remote control only The unit plays the tracks on a disc in random order. 1While stopped Press [PLAY MODE] until the random play screen appears. 2[DVD-Audio\only] Press [2, 1] to select a group and press [ENTER]. ≥You can select more than one group. ≥You can also select groups with the numbered buttons. ≥If you select bonus groups, you will have to enter a 4-digit password (➡ page 11). ≥To clear a group, select it and press [ENTER]. 3Press [1] (PLAY). Play now begins in random order. To exit random mode Press [PLAY MODE] while stopped until the random play screen dis- appears. All group play [DVD-A] Remote control only The unit plays the tracks in all the groups on a disc. 1While stopped Press [PLAY MODE] until the all group play screen appears. 2Press [1] (PLAY). To exit all group mode Press [PLAY MODE] while stopped until the all group screen disap- pears. Press PLAY to start All Group Playback Choose a group or groupsAll123 Random Playback 0 Press PLAY to start ENTERRETURN SELECT RND DVD AUDIO ENTER POWER STOPPAUSEPLAY OPEN/CLOSE SKIP TOP MENUMENU DISPLAYRETURN GROUP PAGEAUDIO ONLY HP-V.S.S. SP-V.S.S. 6 :9 5∫;SLOW /SEARCH
13 Advanced operations RQT6270 Program play [DVD-A] [VCD][CD] Remote control only You can select up to 32 tracks to play in the order you choose. 1While stopped Press [PLAY MODE] until the program play screen appears. 2Press [ENTER]. 3[DVD-Audio\only] Press [3, 4] to select a group and press [ENTER]. ≥If you select bonus groups, you will have to enter a 4-digit password (➡ page 11). 4Press [3, 4] to select a track and press [ENTER]. Each time you press the buttons, 1()2() - - - - - - - ()ALL ^---------------------------------------------J ≥Repeat steps 2, 3 and 4 to program other tracks. ≥You can also select a group or track with the numbered buttons. ≥“Total Time” tells you the total time of the programmed tracks. ≥All the tracks on a disc are selected when you select “ALL” (all the tracks in the selected group with DVD-Audio). 5Press [1] (PLAY).Play now begins in the programmed sequence. To add or change tracks Press [3, 4] to select an available item, then repeat steps 2–4. To move to the page before or after the one shown Press [6] or [5]. To clear the programmed tracks one by one Press [3, 4] to select the item number (No) and press [CANCEL]. (Alternatively, you can select “Clear” with [3, 4, 2, 1] and press [ENTER].) To clear the whole program Move to “Clear all” with [3, 4, 2, 1] and press [ENTER]. The whole program is also cleared when the unit is turned off or the disc tray is opened. To exit the program mode Press [PLAY MODE] while stopped until the program play screen disappears. ≥The program is retained in memory. PLAY MODE ENTERRETURN 6 ∫ 1 5 Choose a group and track, then press ENTER.No TimeG Total Time 0 Press PLAY to startTPlayClear Clear all 0:00 SELECT 1 PGMRND DVDVCDA-BTITLETRACK CHAP V.S.S. BASSCINEMA VIDEO GROUP AUDIO Track No. Program No. e.g. DVD-Audio Group No.
Advanced operations RQT6270 14 [DVD-A] [DVD-V] [VCD][CD] Remote control only A-B repeat play You can repeat a section between points A and B within a title or track. 1During play Press [A-B REPEAT] at the starting point (A). 2Press [A-B REPEAT] at the finishing point (B). To cancel Press [A-B REPEAT] until “`¢¢” is displayed. Note ≥A-B repeat does not work if the DVD’s elapsed play time is not shown on the unit’s display. ≥Some subtitles recorded around point A or B may fail to appear (DVD). ≥The unit automatically determines the end of a title/track as point B when the end of the title/track is reached. Repeat play Repeat play During play Press [REPEAT MODE]. Each time you press the button: e.g. DVD-Video ≥DVD-Audio Track (T)>Whole group (G)>OFF ^----------------------------------------------------} During All group, Program, or Random play modes, “A” is dis- played instead of “G”. ≥DVD-Video Chapter (C)>Title (T)>OFF ^------------------------------------------} ≥Video CD/CD Track (T)>Entire disc (A)>OFF ^------------------------------------------------} If the Video CD has playback control Cancel menu play first. 1. Press [∫] so “PBC PLAY” is cleared from the unit’s display. 2. Press the numbered buttons to select a track to start play. 3. Press [REPEAT MODE] (➡ above). To return to menu play, press [∫] and press [MENU]. Note ≥Repeat play may not work as desired with some DVDs. ≥Repeat play does not work if the disc’s elapsed play time is not shown on the unit’s display. ≥You cannot use repeat play to repeat an entire DVD-Video. ∫To repeat only your favorite tracks [DVD-A] [VCD][CD] 1. Program the tracks you want (➡ page 13). 2. Press [1] (PLAY). Play will start. 3. Press [REPEAT MODE] to display “`T” or “`A”. ENTER POWER STOPPAUSEPLAY OPEN/CLOSE SKIP TOP MENUMENU DISPLAYRETURN GROUP PAGEAUDIO ONLY HP-V.S.S. SP-V.S.S. 6 :9 5∫;SLOW /SEARCH
15 Advanced operations RQT6270 ENTER POWER STOPPAUSEPLAY OPEN/CLOSE SKIP TOP MENUMENU DISPLAYRETURN GROUP PAGEAUDIO ONLY HP-V.S.S. SP-V.S.S. 6 :9 5∫;SLOW /SEARCH
Advanced operations RQT6270 16 2[Icons\for\unit\information\only] While the leftmost icon is highlighted Press [3, 4] to select the menu.Each time you press the buttons: e.g. DVD-Video [>Play menu l l le lu l>Display menu l l le lu l>Audio menu l l le lu {>Video menu 3Press [2, 1] to select the item. 4Press [3, 4] to select the setting.≥Items with “3” or “4” above and below can be changed by [3, 4]. ≥Press [ENTER] if the setting does not change after pressing the buttons [3, 4]. ≥Some items require different operations. Read the explana- tions on the following pages. For your reference ≥Depending on the condition of the unit (playing, stopped, etc.) and the type of software you are playing, there are some items that you cannot select or change. ≥When numbers are displayed (e.g. title No.), the numbered buttons are also effective for setting. After entering numbers, press [ENTER] to register the setting. To clear the icons Press [RETURN] until the menus disappear. ∫To change the position of the icons 1. Press [2, 1] to select the rightmost icon. 2. Press [3, 4] to move the icons. (There are 5 positions) Using On-Screen Menu Icons On-Screen Menu Icons are menus that contain information about the disc or unit. These menus allow you to perform operations by chang- ing this information. Common procedures [DVD-A] [DVD-V][VCD][CD] Remote control only 1Press [DISPLAY]. Each time you press the button: e.g. DVD-Video [>Icons for disc information l l l; l>Icons for unit information l l l; l>Shuttle screen l l l; {=Original display ≥The screens depend on disc contents. ENTER POWER STOPPAUSEPLAY OPEN/CLOSE SKIP TOP MENUMENU DISPLAYRETURN GROUP PAGEAUDIO ONLY HP-V.S.S. SP-V.S.S. 6 :9 5∫;SLOW /SEARCH
17 Advanced operations RQT6270 IconContent [DVD-A] Group number [DVD-V] Title number [DVD-A] [VCD][CD] Track number [DVD-V] Chapter number [DVD-A] [DVD-V] Time Select a position to start play by specifying a time with the numbered buttons. [DVD-A] [VCD][CD] Changing the time display Press [3, 4] to show the elapsed play time, remaining time for the track, or remaining time for the disc/group (DVD-Audio). [VCD] Audio mode LR()L()R ^---------------------J [DVD-A] [DVD-V] aSoundtrack language (See [A] at right for language abbreviations.) bAudio signal type (See [B] at right for details.) [DVD-V] Karaoke vocal on/off (Karaoke DVD only) Solo: OFF or ON Duet: OFF, V1iV2, V1 or V2 Icons for disc information Icon [A] [A][A] [A] [A]Audio/Subtitle language ENG: English FRA: French DEU: German ITA: Italian ESP: Spanish NLD: Dutch SVE: Swedish NOR: Norwegian DAN: Danish POR: Portuguese RUS: Russian JPN: Japanese CHI: Chinese KOR: Korean MAL: Malay VIE: Vietnamese THA: Thai ¢: Others .1: Subwoofer signal(not displayed if there is no subwoofer signal) .0: No surround .1: Mono surround .2: Stereo surround (left/right) .1: Center .2: Front leftiFront right .3: Front leftiFront rightiCenter Content [DVD-A] [DVD-V] Subtitle language (See [A] below for language abbreviations.) Subtitles on/off ON()OFF [DVD-A] [DVD-V] Angle number [VCD] (with playback control only) Menu play Indicates whether menu play (playback control) is on or off. [DVD-A] Still picture number Selected picture is shown during play. [B] [B][B] [B] [B]Signal type/data LPCM/PPCM/ÎDigital/DTS/MPEG: Signal type k (kHz): Sampling frequency b (bit): Number of bits ch (channel): Number of channels Example: 3/2 .1ch e.g. DVD-Video T2C21 : 46 : 501 ENG 3/2.1 chDigitalÎENGON11 G2 T 2 C2 1 : 46 : 50 L R 1 ✱VocalOFF ENG ON 1 ENG1 ON 1 ONP B CP B C Page1 Shuttle screen Note The numbers on either side of the shuttle screen indicate the maximum speeds of the search.Slow-motion play E: Backward [DVD-A] [DVD-V]Slow-motion play D: Forward [DVD-A] [DVD-V] [VCD] Pause Play Search 6: Backward Search 5: Forward r100j100 1 ENG 3/2.1 ch DigitalÎ b a
Advanced operations RQT6270 18 Using On-Screen Menu Icons Icons for unit information Content A-B repeat (➡ page 14) [ENTER] (start point) ➡ [ENTER] (finish point) To cancel: [ENTER] Repeat play (➡ page 14) ≥DVD-Audio Track (T)()Whole group (G)()OFF ^----------------------------------------------------------J ≥DVD-Video Chapter (C)()Title (T)()OFF ^-----------------------------------------------J ≥Video CD/CD Track (T)()Entire disc (A)()OFF ^------------------------------------------------------J [DVD-A] [VCD][CD] Play mode display ---: Normal play RND: Random play PGM: Program play ALL: All group play ([DVD-A]) Marker You can mark up to 5 positions to play again. [ENTER] (The unit is now ready to accept markers.) To mark a position [ENTER] (at the desired point) To mark another position: [2, 1] ➡ [ENTER] To recall a marker: [2, 1] ➡ [ENTER] To erase a marker: [2, 1] ➡ [CANCEL] Icon AB OFF ––– 1 2 3✱✱ Play menuAudio menu IconContent [DVD-V][VCD] ADVANCED SURROUND (V.S.S.) mode (➡ page 11) SP()HP V.S.S. level (➡ page 11) 1()2()OFF ^---------------------J [DVD-V] (Dolby Digital/DTS, 3-channel or over only) Dialogue Enhancer ON()OFF The volume of the dialogue from the center channel is raised when you select “ON”. SP OFF OFF Video menu IconContent [DVD-A] [DVD-V] [VCD] Digital picture mode To select the picture mode: [3, 4] N: Normal mode C: Cinema mode (➡ page 11) U: User mode The following items are also displayed when you select “U”. Contrast (j7 to i7) Increases the contrast between white and black parts of the picture. Brightness (0 to i15) Brightens the picture. Sharpness (j6 to i6) Adjust the sharpness of the edges of the vertical lines. Color (j7 to i7) Adjust the shade of the picture’s color. N 0 0 0 0 Display menu IconContent [DVD-V] IPB display (➡ page 25) ON()OFF Displays the picture type (I/P/B) in the still picture mode. Display dimmer Changes the brightness of the unit’s display. BRIGHT()DIM()AUTO ([DVD-A] [DVD-V][VCD])§ ^--------------------------------J§The display is dimmed during play, but brightens when you perform an operations such as slow- motion, search, and pause. OFF I P B BRIGHT
19 Advanced operations RQT6270 Changing settings This chart shows the settings for this unit. Change the settings to suit your preferences and to suit the unit to the environment in which it is being used. These settings are retained in memory until they are changed, even if the unit is turned off. See page 20 for details on menu operation. ≥Underlined items are the factory preset. Options English French Spanish Original Other ¢¢¢¢ Automatic English French Spanish Other ¢¢¢¢ English French Spanish Other ¢¢¢¢ Setting ratings (When level 8 is selected)8 No Limit : All DVD-Video can be played. 1 to 7: Prohibits play of DVD-Video with corresponding ratings recorded on them. 0 Lock All: Prohibits play of all DVD-Video. Changing ratings (When level 0–7 is selected) Unlock Player Change Password Change Level Temporary Unlock 4:3 Pan&Scan 4:3 Letterbox 16:9 Automatic Field Frame Lighter: when connected to a TV through the VIDEO OUT or S VIDEO OUT terminal. Darker: when connected to a TV through the COMPONENT VIDEO OUT (Y/PB/PR) terminals. Multi-channel: when 3 or more speakers are connected. ≥Speaker presence and size ≥Delay time≥Channel balance 2-channel: when 2 speakers or an amplifier with a Dolby Pro Logic decoder is connected. No Yes Bitstream PCM PCM Bitstream Off On On Off English Français Español On Off Off (DVD-Audio are played as DVD-Audio.) On (DVD-Video contents found on DVD-Audio can be played.) Off On Items Audio [DVD-A] [DVD-V] Choose the audio language. Subtitle [DVD-A] [DVD-V] Choose the subtitle language. Menus [DVD-A] [DVD-V] Choose the language for disc menus. Ratings [DVD-V] (➡ page 20) Set a ratings level to limit DVD-Video play. ≥The password screen is shown if you choose levels 0 to 7 or if you choose “Ratings” when levels 0 to 7 have been selected. ≥Select “Level 0” to prevent play of discs that do not have ratings levels recorded on them. TV Aspect (➡ page 7) Choose the setting to suit your television and preference. Still Mode (➡ page 25) Specify the type of picture shown when paused. Black Level Control Change the black level of the picture if you connected a television through the COMPONENT VIDEO OUT terminals. Speaker Setting [DVD-A] [DVD-V] (➡ page 20) Choose the settings to suit your audio system and the listening environment. PCM Down Conversion [DVD-A] [DVD-V] (➡ page 21) Select how to output the audio signals on discs that do not have copyright protection. Dolby Digital [DVD-A] [DVD-V] (➡ page 21) Digital output of Dolby Digital signals. DTS Digital Surround [DVD-A] [DVD-V] (➡ page 21) Digital output of DTS Digital Surround signals. D. Range Compression [DVD-A] [DVD-V] (Dolby Digital only) Change the dynamic range for late night viewing. Audio during Search [DVD-A] [DVD-V] [VCD] (➡ [Remarks] below) Choose whether to have sound during search. Menu Language Choose the language for these menus and the on-screen messages. On-Screen Messages Choose whether to show on-screen messages or not. DVD-Video Mode Select how to play pictures contained on some DVD-Audio. The setting returns to “Off” when you remove the disc or turn the unit off. Demo A demonstration of the unit’s on-screen displays starts when you select “On”. The demonstration stops when you press a button and the setting reverts to “Off”. Menus Disc (➡ [Remarks]below) Video Audio Display Others Remarks ∫Disc—Audio, Subtitle and MenusOriginal:The original language of each disc will be selected. Other ¢¢¢¢:Input a code number with the numbered buttons (➡ page 30). Automatic:If the language selected for “Audio” is not available, subtitles of that language will automatically appear if available on that disc. ≥Some discs are designed to start in a certain language despite any changes you make here. ∫Audio—Audio during Search Audio will be heard when playing some DVD-Audio despite the settings you make here.
RQT6270 20 Advanced operations Common procedures Remote control only See page 19 for menu and option details. 1Press [ACTION] to show the menus. 2Press [2, 1] to select the menu’s tab. The screen changes to display the menu. Disc Video Audio (---) (---) :: ;; Others Display (------------------) 3Press [3, 4] to select the item you want to change and press [ENTER]. 4Press [3, 4] to select the option and press [ENTER]. The screen now shows the menu again. To return to the previous screen Press [RETURN]. When you are finished Press [ACTION]. Changing settings Now, when you insert a DVD-Video that exceeds the ratings limit you set, a message appears on the television. Follow the on-screen instructions. Entering a password (Ratings) [DVD-V] The password screen is shown when you select levels 0 to 7. 1. Input a 4-digit password with the numbered buttons and press [ENTER]. ≥If you enter a wrong number, press [CANCEL] to erase it before you press [ENTER]. ≥The lock symbol appears closed to show the rating is locked. ≥Do not forget your password. 2. Press [ENTER] to confirm the 4 digits. Speaker setting [DVD-A] [DVD-V] Change speaker presence and size a, delay time b, and chan- nel balance c to suit the speakers you have connected. These settings are not necessary when you select “2-channel” (only two speakers are connected). Speaker presence and size (a) 1. Press [3, 4, 2, 1] to select the item and press [ENTER]. 2. Press [3, 4] to select the setting and press [ENTER]. Icon examples:Surround speaker (L) Large:When the speaker supports low-frequency (under 100 Hz) reproduction. Small:Select when the speaker does not support low-frequency reproduction. The size setting for the front speakers is automatically determined by the setting for the subwoofer. Disc SELECT Audio Subtitle Menus RatingsEnglish English Automatic Level 8 ACTION ENTER RETURN ENTER POWER STOPPAUSEPLAY OPEN/CLOSE SKIP TOP MENUMENU DISPLAYRETURN GROUP PAGEAUDIO ONLY HP-V.S.S. SP-V.S.S. 6 :9 5∫;SLOW /SEARCH