Panasonic Dvd Player Receiver Cq Vd7001 Installation Safety Information Manual

63
CQ-VD7001W
62
CQ-VD7001WInstallation 
(continued)
!1Spacer
!2Double-Faced Adhesive Tape iRound Head Screw 
(5 mmø x 6 mm)Bracket Mounting Hole
of a Bracket
(in section)
Existing Bracket (L) (Bracket originally attached to the car)!2Double-Faced 
Adhesive TapeExisting Bracket (R)iRound Head Screw
(5 mmø x 6 mm)
!1Spacer
❏Installation Procedures (When not using Mounting Collar w)Use the brackets supplied with your car when mounting this unit. The bracket shape and mounting method vary with car...

VIDEO-OUTVTR-IN
PRE-OUT REARREMOTE-OUTS.W-OUT PRE-OUT CENTERTV-CONT
PRE-OUT FRONTCAMERA-INCH/AUX-INREMOTE-IN
65
CQ-VD7001W
Note:¡To prevent from damage to the unit, be sure to follow the wiring diagrams below.¡Be sure to fully plug in the connectors. Secure them with clamps and tapes.¡All other installation methods require the use of dedicated metal fittings. Consult with a qualified servicing engineer or
your dealer if other methods are required.
Video Output Terminal (VIDEO-OUT)
Connect the rear...

67
CQ-VD7001W
66
CQ-VD7001WElectrical Connections 
(continued)
CH/AUX-IN
Connection with CD Changer (CX-DP880) 
CQ-VD7001W
(Rear)
DIN Connector
DIN Cord (Black)
CD ChangerCX-DP880
(option)
Power Connector
(Supplied with CX-DP880)
RCA Cord
(L) (White) (R) (Red)Battery Lead (Yellow)
To the car battery, continuous
+12 V DC Ground Lead (Black)
To a clean, bare metallic part of the car
chassis Note:
¡Refer to the operating instructions for the connected devices, in addition.
ACC
VTR-IN
REMOTE-OUT
CH/AUX-IN...

69
CQ-VD7001W
68
CQ-VD7001WElectrical Connections 
(continued)
(Video)
(Yellow)
REVERSE
PRN
D
2
L
Panasonic
CAMERA-IN
Connecting the Reverse LeadIf using an optional rear view camera, the reverse lead must
be connected.
Connect the reverse lead (violet/white stripe) to the positive (+)
lead of the reverse lamp (the lamp with a clear lens that lights
when the transmission gear is shifted into the reverse position).
Note:
¡Connect the reverse lead after cutting the terminal at the end.
¡Use a Reverse...

7071
CQ-VD7001W
CQ-VD7001W
SpecificationsGeneral¡Power supply : 12 V DC (11 V – 16 V), test
voltage 14.4 V, negative
ground
¡Current consumption : Less than 10 A (during disc
playback)
¡Maximum power output
:50 W x 4 ch
¡Compatible speaker 
impedance : 4 Ω
¡Video input signal : Composite video signal, 1.0
Vp-p (75 Ω)
¡Audio input sensitivity : 2 Vrms
¡Video output signal : Composite video signal, 1.0
Vp-p (75 Ω)
¡
Pre-Amp output voltage
:2 Vrms
¡
Pre-Amp output impedance
:Less than 600 Ω
¡Dimensions (W x...