Panasonic Dvd Home Theater Sound System Sc Ptx7 Operating Instructions

RQT8926
81
Preparation
1 To display the picture turn on the television and select the 
appropriate video input to suit the connections to this unit.
2 Create a Multiroom connection (➜page 80).
3 Turn on the power for SH-FX85.
4Press [Í].
You can select the audio source in another room.
1Press [2ND SELECT].
2Press [34] to select the item and press [ENTER].
Audio from the chosen selector will be output through the 
speakers in another room.
§If the selector for “ANOTHER ROOM” is set to “Music 
Collection”,...

RQT8926
82
Changing audio quality/sound field
[Note]
≥The following sound effects may not be available or have no 
effect with some sources, or when headphones are used 
(➜page 86).
≥You may experience a reduction in sound quality when these 
sound effects are used with some sources. If this occurs, turn 
the sound effects off.
By changing the settings, you can enjoy various audio quality.
1Press [SOUND].
Each time the button is pressed, it switches as shown below.
∫To change the sound quality
2When “EQ”...

RQT8926
83
The settings for the volume balance of the front speakers 
(L , R) changes (0 to s12 dB).
≥When headphones are connected (➜page 86) the 
balance will return to 0 dB (center).
∫To change the subwoofer trim levels
2When [TRIM SW (SW ch)] is selected, press [34].
The settings for the trim level of the subwoofer changes 
(s6 to r6dB).
With only the included front/center speakers and the 
subwoofer, you can add a surround sound effect similar to 5.1 
ch (Dolby Digital or DTS) to any audio source....

RQT8926
84
Using the scheduled timer recording function
When the previously set time and day of the week is reached, 
the power will turn on and the unit will record from an external 
audio source or radio to the HDD, and when the recording time 
is finished, the unit will turn off automatically. You can also set 
the unit to make multiple recordings.
Preparation
1 To display the picture turn on the television and select the 
appropriate video input to suit the connections to this unit.
2Press [Í].
3 Set...

RQT8926
85
You can use only the scheduled timer recording that you want 
to use by switching only the desired scheduled timer recording 
to “On” from the list of scheduled timer recording settings.
After completing step 4 on the left column,
5Press [3421] to select the scheduled timer 
recording that you want to use and press [ENTER].
Selected scheduled timer recording day of the week and 
starting time.
6Select the operation you want to set.
1
Press [34] to select “Timer Setup” and press 
[ENTER].
2...

RQT8926
86
Using other convenient functions
1Press [SLEEP].
2While the time is shown
Press [SLEEP] to select the time (in minutes).
To cancel the timer
While the time is shown, press [SLEEP] to select “OFF”.
To confirm the remaining time
Press [SLEEP] again.
To change the setting
Repeat the procedure from the beginning.
Press [MUTING].
“MUTING” flashes on the unit’s display.
To cancel
≥Press [MUTING] again or reduce the volume to minimum 
“VOL 0”, and then raise it to the required level.
≥Muting is...

RQT8926
87
Backing up HDD data to a PC
We recommend backing up the tracks on the HDD regularly using a PC or NAS (Network Attached Storage). In the event that this 
unit requires service and the music data is damaged or lost, you can restore music from the last time you backed up.
Preparation
1 Connect the unit to a PC network (➜page 20), or directly 
connect it to a PC (➜page 90).
2 To display the picture turn on the television and select the 
appropriate video input to suit the connections to this...

RQT8926
88
Backing up HDD data to a PC 
Perform “Preparation” and “Settings to check on the PC” as 
described on page 87.
1Press [SETUP].
2Press [34] to select “Other Setup” and press 
[ENTER].
3Press [34] to select “Maintenance” and press [1].
4Press [34] to select “Backup/Restore” and press 
[ENTER].
5Press [34] to select “Backup” and press [ENTER].
6Press [34] to select “PC Name” and press [ENTER].
When the PC name is displayed
The PC name and other information that was used when 
previous backups and...

RQT8926
89
This function will restore the backup data that was saved on 
your PC to this unit.
If the HDD requires service, please wait until the HDD has 
been repaired before restoring the backup to the HDD.
Perform “Preparation” and “Settings to check on the PC” as 
described on page 87.
1Press [SETUP].
2Press [34] to select “Other Setup” and press 
[ENTER].
3Press [34] to select “Maintenance” and press [1].
4Press [34] to select “Backup/Restore” and press 
[ENTER].
5Press [34] to select “Restore” and...

RQT8926
90
For reference: connecting this unit directly to a PC
When importing WMA/MP3 data (➜page 40), creating a backup (➜page 88), or restoring backed up data (➜page 89), you can 
connect this unit directly to your PC with a cross LAN cable. When using this connection method, changes to the settings on this 
unit and your PC are necessary.
Preparation
1 Connect this unit to the PC with a cross LAN cable (not 
included).
2 To display the picture turn on the television and select the 
appropriate video...