Panasonic Dvd Home Theater Sound System Sc Pt950 Operating Instructions

							
RQTX0064
11
Simple Setup
∫[PT1050] Before using your wireless subwoofer 
Perform the pairing procedure below to use your wireless subwoofer.
Preparation
≥Ensure all connections are completed.
≥ Turn on the main unit and reduce the volume.
1 Turn on your wireless subwoofer.
2 While pressing [ 5/9 ] on the main unit, press the numbered button [3] on the remote control until “P” lights in the main unit’s display.
3 While “P” is displayed, press [I/D  SET].
4 While pressing [ 5/9 ] on the main unit, press the numbered button [3] on the remote control.
≥ “ [WS]  ” lights on the main unit’s display.
5 Turn the wireless subwoofer off and on again. ≥Make sure its indicator lights up green.
Do not:≥ mix old and new batteries.
≥ use different types at the same time.
≥ heat or expose to flame.
≥ take apart or short circuit.
≥ attempt to recharge alkaline or manganese batteries.
≥ use batteries if the covering has been peeled off.
Mishandling of batteries can ca use electrolyte leakage which can 
severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a 
long period of time. Store in a cool, dark place.
∫ Use
Aim at the remote control signal sensor ( ➜page 13), avoiding 
obstacles, at a maximum range of 7 m (23 feet) directly in front of 
the unit.
The QUICK SETUP screen assists you to make necessary settings.To display the picture from the main unit, 
turn on your television and change its video 
input mode (e.g. VIDEO 1, AV 1, etc.).
≥ To change your television’s video input mode, 
refer to its operating instructions.
≥ This remote control can perform some basic 
television operations ( ➜page 12).
To change these settings later
Select “ QUICK SETUP” in the “Others” menu ( ➜page 27).
I/D SET
I/D SET
Use a pointed object.
Wireless subwoofer
step
7Preparing the remote control
R6/LR6, AA
Insert so the poles ( i and  j) match those in the remote control.
≥ Do not use rechargeable type batteries. Press in and lift up.
Replace the cover.
∫ Batteries
step
8Performing QUICK SETUP
AUTO
, , , ENTER
SETUPDVD
RETURN
1Turn on the unit.
2Select “DVD/CD”.
3Show the QUICK SETUP 
screen.
4Follow the messages 
and make the settings.
≥
Menu Language
≥ TV Type
≥ TV Aspect
5Press to finish QUICK 
SETUP.
6Press to exit.
DV D
SETUPSetup
ENTERRETURNto  select and pressto return
QUICK SETUPSelect the menu lan gua ge.
En glish
Select
Register
RETURN
ENTER
SETUP
Preparing the remote control / Performing QUICK SETUP
0064 En_p03-15.fm  Page 11  Wednesday, March 28, 2007  8:49 AM 
						

							RQTX0064
12
Control reference guide
See page references in parentheses.
Aim the remote control at the Panasonic television and press the 
button.
[ÍTV]:Turn the television on/off
[TV/VIDEO]:Change the television’s video input mode
[r, s]:Adjust the television volume
≥This may not work properly with some models.
≥To operate some other brands of televisions, change the remote control 
code.
Aim the remote control at the television.
While pressing [ÍTV], press the numbered buttons to enter the 
4-digit television code.
If the code is correct, the television turns on or off. If it does not, try 
entering another code.
]Note]Reenter the codes after you change the batteries.Television code list
Other Panasonic audio/video equipment may start functioning when you 
operate the unit using the supplied remote control.
You can operate this unit in another mode by setting the remote control 
operating mode to “REMOTE 2”.The main unit and remote control must be set to the same mode.
1 Press and hold [5] on the main unit and [2] on the remote 
control until the main units display shows REMOTE 2. 
2 Press and hold [ENTER] and [2] on the remote control for at least 2 
seconds.
To change the mode back to “REMOTE 1”, repeat both steps above by 
replacing [2] with [1].
Operating the television
(17) (19, 31) (18)(18)
(32) (32)(32)(32)
(17)
(32)(18)
(33)(33)
CANCEL PLAY MODE REPEAT
C.FOCUSCD MODE
PLEQ
CH SELECT
SUBWOOFER
TEST
FL DISPLAY
(25)SETUPLEVEL
S.SRD SRD
MUSIC
QUICK REPLAY
AUTOAUTO(33)H.BASS
Select disc’s title numbers etc./Enter numbers (17)
Basic operations for play (16, 17)
Show a disc top menu (20) or program list (21)
Show on-screen menu (22)
Show a disc menu (20) or play list (21)
Return to previous screen (17) Select the disc or show disc information (18)
Display current playback condition (18)
Select a group of contents to play (17)
[PT1050]
Enhancing the surround sound effect (33)
Turn the unit off automatically (Sleep timer)
≥The maximum setting is 120-min (in 30-min steps).
≥Press the button again to confirm the remaining time on 
the unit’s display.
≥To cancel, select “OFF” in the main unit’s display. Start up and play a disc automatically (17, 28) Select preset radio stations/channels (29, 31)Select the source
[DVD]: DVD/CD (11)
[TUNER/BAND]: FM/AM (29), XM (30)
[N,OSELECT]: DVD/CD, FM/AM, XM,
AUX (34)/ MUSIC P. (34)/ 
D-IN (34) ([PT1050]) / OPTION (34)
Frame-by-frame / Select or register menu items on the 
television screen (17)/ Browse XM radio categories (31) Select radio stations/channels manually (29, 31) The below function is available only when using the 
optional Panasonic wireless sound system SH-FX85.
[2ND SELECT]: Change the source for the second room
MAIN SOURCE (follows the selected source for the 
main room)#(FM#AM)§#XM#OPTION#
Return to MAIN SOURCE
§If the main room is in FM/AM mode, you can only 
select the same mode for the FM/AM tuner of the 
second room.
For details, refer to the operating instructions for the 
optional Panasonic wireless sound system SH-FX85.
Mute the sound
≥“MUTING” flashes in the main unit’s display while 
the function is on.
≥To cancel, press the button again or adjust the 
volume.
≥Muting is canceled when you switch the unit to 
standby. Adjust the volume of the main unit Turn the main unit on/off (11) Television operations
Refer to “Operating the television” below.
Panasonic: 0051, 0250
Fisher: 0154
GE: 0047
Gold Star:  0178, 0317, 0457
Hitachi: 0145
JVC: 0053
Magnavox: 0054
Mitsubishi: 0150
Philips: 0054
Quasar: 0051, 0250RCA: 0047
Samsung:  0060, 0587, 0702
Sanyo: 0154
Sharp: 0093, 0165
Sony: 0000
Sylvania: 0054
Thomson: 0047
Toshiba: 0156
Zenith: 0017
Avoiding interference with other Panasonic equipment
Control reference guide
PT950 and 1050_En.book  Page 12  Thursday, December 21, 2006  1:48 PM 
						

							
RQTX0064
13
Control reference guide
Listening caution
POWER
5 DISC SELECTOR
SELECTOR
TUNINGTUNE MODE FM MODEMEMORY
MUSIC PORTVOLUME
SKIPEXCHANGEDISCOPEN CLOSE
12345
SETUP MIC
VOLUME
AUTO OPERATION ON/OFFPOWER
AUTO OPERATION  ON/OFF
POWER

Standby/on switch [POWER  Í/I]
Turn the main unit on/off.
Press to switch the unit from on to standby mode or 
vice versa. In standby mode, the unit is still 
consuming a small amount of power.  (16)
MUSIC PORT/SETUP MIC
Connect an external device  (34)/
Connect the setup microphone  (33)
4 , 5 /X TUNING W
Skip or slow-search play  (16)/
Select the radio stations/channels  (29, 31)
SELECTOR (29)
D
V D/CD #FM #AM #XM #
AU X #MUSIC P. #D-I N([PT1050] )#
OPTIO N# Return to D VD/CD ∫
/ -TUNE MODE / —FM MODE
Stop playing  (16)/
Select the tuning mode  (29)
Adjust the FM reception condition  (29)
1 /MEMORY
Play discs  (16)/ Memorize the receiving 
radio stations/channels  (29, 31)
Display < 
OPEN/CLOSE
Open/Close the disc drawer  (16)
DISC EXCHANGE
Open the disc drawer to exchange 
the disc in the play position  (16)
DISC SKIP
Skip to the next disc tray  (16)
Unit on/off button 
[POWER  CI,  BÍ ]
Use this button to turn 
the unit on and off.
C I: This unit is on.
BÍ : This unit is off.
AUTO OPERATION ON/OFF indicator
The indicator lights red when the wireless system is turned on 
and lights green when the wireless link is activated.
W
hen the wireless link is inactive for a long time, it turns red. Headphones (not included)
Headphone plug type: 
‰3.5 mm (1/8z) stereo mini plug
≥ Reduce the volume before connecting.
≥ Audio is automatically switched to 2-channel stereo.
≥ To prevent hearing damage, avoid listening for 
prolonged periods of time.
Remote control signal sensor
Adjust the volume of 
the main unit.
Unit on/off button 
[POWER  BÍ, C I]
Use this button to turn 
the unit on and off.
BÍ : This unit is off.
C I: This unit is on.
AUTO OPERATION ON/OFF indicator
The indicator lights red when the wireless 
system is turned on and lights green when 
the wireless link is activated.
W
hen the wireless link is inactive for a long 
time, it turns red.
5 DISC SELECTOR
Select a disc directly 
(16)
≥ A disc indicator lights if a disc is detected or a 
tray is unchecked.
[PT1050]
EST. 1924
Selecting fine audio equipment such as the unit 
you’ve just purchased is only the start of your 
musical enjoyment.  Now it’s time to consider 
how you can maximize the fun and excitement 
your equipment offers. This manufacturer and 
the Electronic Industries Association’s 
Consumer Electronics Group want you to get 
the most out of your equipment by playing it at a 
safe level. One that lets the sound come 
through loud and clear without annoying blaring 
or distortion—and, most importantly, without 
affecting your sensitive hearing. W
e recommend that you avoid prolonged 
exposure to excessive noise.
Sound can be deceiving. Over time your 
hearing “comfort level” adapts to higher 
volumes of sound. So what sounds “normal” 
can actually be loud and harmful to your 
hearing.
Guard against this by setting your equipment at 
a safe level BEFORE your hearing adapts. To establish a safe level:
≥
Start your volume control at a low setting.
≥ Slowly increase the sound until you can hear 
it comfortably and clearly, and without 
distortion.
Once you have established a comfortable 
sound level:
≥ Leave it there.
Taking a minute to do this now will help to 
prevent hearing damage or loss in the future. 
After all, we want you listening for a lifetime.
0064 En_p03-15.fm  Page 13  Wednesday, January 31, 2007  12:27  PM 
						

							
RQTX0064
14
Discs that can be played
Discs that can be played
Commercial discs
Recorded discs (± : Playable,  k: Not playable)
≥It may not be possible to play all the above-mentioned discs in some cases due to the type of disc, the condition of the record ing, the recording 
method, or how the files were created ( ➜page 15, Tips for making data discs).
§1This unit can play CD-R/RW recorded with CD-DA or Video CD format.
[WMA]  [MP3]  [JPEG]  This unit also plays HighMAT discs.
§2Discs recorded on DVD video recorders or DVD video cameras, etc. using Version 1.1 of the Video Recording Format (a unified vid eo recording 
standard).
§ 3Discs recorded on DVD video recorders or DVD video cameras using Version 1.2 of the Video Recording Format  (a unified video re cording 
standard).
§ 4Discs recorded on DVD video recorders or DVD video cameras using DVD-Video Format.§5Recorded using a format different from DVD-Vid eo Format, therefore some functions cannot be used.§6A process that allows play on compatible equipment. To play a disc  that is indicated as “Necessary”, the disc must first be finalized on the device it 
was recorded on.
§ 7Closing the session will also work.
∫ Discs that cannot be played
DVD-RW version 1.0, DVD-Audio, DVD-ROM, CD-ROM, CDV, 
CD-G, SACD, DivX Video Discs an d Photo CD, DVD-RAM that 
cannot be removed from their cartridge, 2.6-GB and 5.2-GB 
DVD-RAM, and “Chaoji VCD” available on the market including 
CVD, DVCD and SVCD that do not conform to IEC62107.
∫ Disc handling precautions
≥Do not attach labels or stickers to discs. This may cause disc 
warping, rendering it unusable.
≥ Do not write on the label side with a ball-point pen or other writing 
instrument.
≥ Do not use record cleaning sprays, benzine, thinner, liquids which 
prevent static electricity, or any other solvent.
≥ Do not use scratch-proof protectors or covers.
≥ Do not use the following discs:
– Discs with exposed adhesive from removed stickers or labels  (rented discs, etc.).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart shapes.
DiscLogoIndicated in these  instructions byRemarks
DVD-Video [DVD-V]High quality movie and music discs
Video CD [VCD]Music discs with video
Including SVCD (Conforming to IEC62107)
CD[CD]
Music discs
DiscLogo
Recorded on a 
DVD  video  
recorder, etc.Recorded on a personal  computer, etc.
Finalizing§6
[DVD-VR]§ 2[DVD-V]§ 4[WMA][MP3][JPEG]
DVD-RAM± — k±±Not necessary
DVD-R/RW±±k±±Necessary
DVD-R DL±§3±kkkNecessary
i R/ iRW— k(± )§ 5kkkNecessary
iR DL— k(± )§ 5kkkNecessary
CD-R/RW§1——— ±±±Necessary§7
Note about using a DualDiscThe digital audio content side of  a DualDisc does not meet the 
technical specifications of  the Compact Disc Digital Audio 
(CD-DA) format so playback may not be possible.
PT950 and 1050_En.book  Page 14  Sunday, December 10, 2006  10: 25 PM 
						

							RQTX0064
15
Discs that can be played / Maintenance
∫Tips for making data discs
≥When there are more than 8 groups, the eighth group onwards will be displayed on one vertical line in the menu screen.
≥There may be differences in the display order on the menu screen and computer screen.
≥This unit cannot play files recorded using packet write.
Naming folders and files
(Files are treated as contents and 
folders are treated as groups on this 
unit.)
At the time of recording, prefix folder and 
file names. This should be with numbers 
that have an equal number of digits, and 
should be done in the order you want to 
play them (this may not work at times).DVD-RAM
≥Discs must conform to UDF 2.0.
DVD-R/RW
≥Discs must conform to UDF bridge (UDF 1.02/ISO9660).
≥This unit does not support multi-session. Only the default session is 
played.
CD-R/RW
≥Discs must conform to ISO9660 level 1 or 2 (except for extended 
formats).
≥This unit supports multi-session but if there are many sessions it takes 
more time for play to start. Keep the number of sessions to a minimum 
to avoid this.
∫To  c l e a n  d i s c s
Wipe with a damp cloth and then wipe dry.
∫Clean this unit with a soft, dry cloth.
≥Never use alcohol, paint thinner or benzine to clean this unit.
≥Before using chemically treated cloth, carefully read the instructions that 
came with the cloth.
Do not use commercially available lens cleaners as they may cause 
malfunction. Cleaning of the lens is generally not necessary although 
this depends on the operating environment.
FormatDiscExtensionReference
[WMA]CD-R/RW“.WMA”
“.wma”≥Compatible compression rate: between 48 kbps and 320 kbps
≥You cannot play WMA files that are copy-protected.
≥This unit does not support Multiple Bit Rate (MBR: an encoding process for audio content that 
produces an audio file encoded at several different bit rates).
[MP3]DVD-RAM
DVD-R/RW
CD-R/RW“.MP3”
“.mp3”≥Compatible compression rate:
– between 32 kbps and 320 kbps for sampling frequencies of 32 kHz and above
– between 8 kbps and 160 kbps for sampling frequencies of 24 kHz and below
≥This unit does not support ID3 tags.
≥Compatible sampling frequencies:
– DVD-RAM, DVD-R/RW:
11.02, 12, 22.05, 24, 44.1 and 48 kHz
– CD-R/RW:
8, 11.02, 12, 16, 22.05, 24, 32, 44.1 and 48 kHz
[JPEG]DVD-RAM
DVD-R/RW
CD-R/RW“.JPG”
“.jpg”
“.JPEG”
“.jpeg”≥JPEG files taken on a digital camera that conform to DCF Standard (Design rule for Camera 
File system) Version 1.0 are displayed. 
– Files that have been altered, edited or saved with computer picture editing software may not 
be displayed.
≥This unit cannot display moving pictures, MOTION JPEG and other such formats, still pictures 
other than JPEG (e.g. TIFF), or play pictures with attached audio.
002 group
001
001 group
001 track.mp3
002 track.mp3
003 track.mp3 003 group
001 track.mp3
002 track.mp3
003 track.mp3
001 track.mp3
002 track.mp3
003 track.mp3
004 track.mp3
e.g. [MP3]root
Maintenance
Before moving the unit, ensure the disc trays are empty. Failure to 
do so will risk severely damaging the discs and the unit.
PT950 and 1050_En.book  Page 15  Thursday, December 21, 2006  1:48 PM 
						

							
RQTX0064
16
Basic play
Basic play
To display the picture from the main unit, turn on your television and change its video input mode (e.g. VIDEO 1, AV 1, etc.).≥To change your television’s video input mode, refer to its operating instructions.
[Note[≥ DISC CONTINUES TO ROTATE  WHILE MENUS ARE DISPLAYED.  
To preserve the unit’s motor and your television screen, press [ ∫](Stop) 
when you are finished with the menus.
≥ Total title number may not be displayed properly on  iR/ iRW.
Using the main unit
PO WER
5 DISC SELECTOR
SELECTOR
TUNINGTUNE MODE FM MODEMEMORY
MUSIC PORTVOLUME
SKIPEXCHANGEDISCOPEN CLOSE
12345
SETUP MIC
DISC SKIP
DISC EXCHANGE
SELECTOR
PO
WEROPEN CLOSE
OPEN CLOSE
5 DISC SELECTOR
12345
+,    VOLUME
5Start play.
≥Press [ r, s  VOLUME] to adjust 
the volume.
≥ You can enjoy surround sound 
when you press [ ÎPLII/S.SRD] 
to turn on Dolby Pro Logic II 
( ➜ page 32).
3Open the drawer and place the disc(s).
≥Load double-sided discs so the label for the side you want to 
play is facing up.
≥ To load discs on the other trays, press [DISC SKIP] on the 
main unit.
≥ Play will start from the disc in  the front-left position of the 
tray.
≥ For D VD-RAM, remove the disc 
from its cartridge before use.
≥ Do not:
– load more than one disc per tray.
– touch the drawer or the carousel while they are in motion.
– rotate the carousel by hand.
– close the drawer by hand.
∫  (Stop)
Press to select a disc directly.≥ You can also select the disc using the remote 
control ( ➜page 18, Checking and selecting 
the disc).
2Select “DVD/CD”.
1Power on.
4Close the drawer.
Press to skip.
Press and hold to 
– search during play
– start slow-motion play during pause  (Motion picture part)
≥ Press [ 1] (Play) to start normal play.
Select the 
next disc 
tray
Exchange the 
disc in the 
play position
≥The drawer opens and the disc 
in the play position comes to the 
front-left position.
≥ Press the button again to play 
the disc after changing the disc 
in the front-left position.
SKIPDISC—
EXCHANGEDISC
Change the 
other discs 
without 
interrupting 
play≥Each time you press [DISC 
SKIP], you can select the other 
trays.
OPEN CLOSE
OPEN CLOSE
SKIPDISC
Change the 
discs
PT950 and 1050_En.book  Page 16  Tuesday, December 26, 2006  3: 37 PM 
						

							
RQTX0064
17
Basic play
If you are experiencing problems, refer to troubleshooting (➜page 36 to 39).
Using the remote control
One touch 
playThe main unit automatically turns 
on and starts playing the disc in 
the play position ( ➜page 28).
Stop
The position is memorized while 
“RESUME” is on the display.
≥Press [ 1PLAY] to resume.
≥ Press [ ∫ STOP] again to clear 
the position.
Pau se≥ Press [ 1PLAY] to restart play.
Skip≥[WMA]  [MP3] [JPEG]
[This feature does not work 
during program and random play 
( ➜ page 19).]
[ 3 ,4 ]: Group skip
[ 2 ,1 ]: Content skip
Search
(during play)
≥Up to 5 steps.
≥ Press [ 1PLAY] to start normal 
play.
Slow-motion
(during pause)
≥ [VCD]  Slow-motion: forward 
direction only.
Frame-by-
frame
(during pause)
[DVD-VR]  [DVD-V]  [VCD]
≥ [VCD]  Forward direction only.
TOP MENU,
DIRECT NAVIGATOR
,
1
2
5
RETURN
FL DISPLAY CANCEL
ONE TOUCH  PLAY
MENU, PLAY LIST
,SKIP SLOW/SEARCH
STOP,     PAUSE
GROUP
+,    VOLUME
AUTO
Numbered buttons
[PT950] [PT953]
ONE TOUCH PLAY
STOP
PA U S E
SKIP—
SLOW SEARCH
On-screen 
item select
Enter 
number
[DVD-VR]  [DVD-V]  [VCD]  [CD]
e.g. To select 12:
[ S 10]  ➜ [1]  ➜ [2]
[VCD]  with playback control
Press [ ∫ STOP] to cancel the PBC 
function, and then press the 
numbered buttons.
[WMA]  [MP3]  [JPEG]
e.g. To select 123:
[1]  ➜ [2]  ➜ [3]  ➜ [ENTER]
≥ Press [CA NCEL] to cancel the 
number(s).
[DVD-V]
Shows a disc top menu.
[DVD-VR]
Press the button to show the 
programs ( ➜page 21).
Disc menu
[DVD-V]
Shows a disc menu.
[DVD-VR]
Press the button to show a playlist 
(➜ page 21).
[VCD]  with playback control
Shows a disc menu.
Return to 
previous 
screen
Main unit 
display
[DVD-VR]  [DVD-V]  [VCD]  [CD]
[WMA]  [MP3]
Time display
,-.Information display
(e.g.  [DVD-VR]  Program 
number)
[JPEG]
W hen Slideshow ( ➜page 22) is 
on:
SLIDE
,-.Contents number
W hen Slideshow is off:
PLAY
,-.Contents number
[PT950] [PT953]
Start play 
from a 
selected 
group
[WMA]  [MP3]  [JPEG]
A folder on  WMA/MP3 and JPEG 
discs is treated as a “Group”.
Select
Register —
12
3
5 6
8 9
0
10
4
7
ENTER
CANCEL
TOPMENUDIRECTNAVIGATOR
PLAYLIST
MENU
RETURN
RETURN—
DISPLAYFL
GROUP
Register Select
0064 En_p16-27.fm  Page 17  Tuesday, February 6, 2007  3:52 PM 
						

							
RQTX0064
18
Convenient functions
Convenient functions
Press [QUICK OSD].Basics ------------------------------------------------------------>   Details
^------  off (No on-screen display) ,-------b This feature is very convenient if you want to play several music CDs 
sequentially. Select an applicable disc before playing (
➜ Checking and 
selecting the disc, left).
While stopped
≥ If all loaded discs are DVDs, CD Mode does not work.
≥ HighMAT menus and Video CD playback control are disabled.
≥ You cannot turn CD Mode on or off during program or random play.
≥ If you want to play a DVD, press [CD MODE] again while stopped to 
cancel CD Mode. (CD Mode is also  canceled when you switch the unit 
to standby, select another source, or change the disc in the play 
position.)
≥ DVD and JPEG are skipped without being played.
This works only when the elapsed play time can be displayed. It also 
works with all JPEG content.
During play
Press [REPEAT] several times to select an item to be repeated.
Items shown differ depending on the type of disc and playback mode.
Press [QUICK REPLAY] to skip back a few seconds.
≥ This may not work depending on the disc’s recording.
≥ This does not work with +R/+RW.
Checking and selecting the disc
1Press [DISC] to show the Disc information screen.≥To exit the screen, press [DISC].
2Press the numbered buttons ([1] – [5]) to select the 
disc.
Displaying current playback 
condition
, , , ENTER
CANCEL DISC
 PLAY MODE CD MODE
QUICK REPLAY REPEAT
QUICK OSD
1    5
PLAY
STOP
AUTO
Numbered
buttons
DISC
Disc Information
CD
DVD-Video
UncheckedNo DiscDVD-VideoTrack 10 Time 1:15
Not yet read
Empty
e.g.
QUICK OSD
e.g. 
[DVD-V]
∫Basics
Details - D VD- Video
  A udio
  S ubtitle
  Angle
  So urce Aspect
  Title Total Time
1         DTS 3/2.1ch
1/1
4:3
0:54:28Audio information
Subtitle information Angle information
Aspect of current title
Total play time of current title
∫ Details
ChapterTime4Title1 0:41:23
Pro gram Playback
Elapsed play time
Current playback number
Current position
Play mode
Playback condition
e.g.  [DVD-V]
Playing CDs sequentially[VCD] [CD]  [WMA]  [MP3]
1Press [CD MODE].
2Press [ 1PLAY].
Repeat play
[PT950]  [PT953]  Quick replay
[DVD-VR] [DVD-V] [WMA] [MP3] [VCD] [CD]
MODE
CD
DISCS.SRDTGKARAD.MIXMO NOSLPUSB
MODECD
D
V D
REPEAT
Functions
Repeat Off
Chapter
Title Off
e.g.  [DVD-V]
QUICK REPLAY
0064 En_p16-27.fm  Page 18  Tuesday, February 6, 2007  3:53 PM 
						

							RQTX0064
19
Convenient functions
≥Select “Play as Data Disc” in Other Menu (➜page 24) when using
– HighMAT discs without using the HighMAT function, or
– DVD-RAM or DVD-R/RW discs containing MP3 or JPEG files.
≥[DVD-V] 
Some items cannot be played even if you have programmed them.
∫When CD Mode is off
[DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
You can program all the items on a disc in the play position.
1[VCD] [CD] Skip to step 2
Press the numbered buttons to select a group or title.
([WMA] [MP3] [JPEG]
 Press [ENTER] to register the selection.)
≥To select a 2-digit number
e.g.  To select 12: [S10] ➜ [1] ➜ [2]
[WMA] [MP3] [JPEG] [1] ➜ [2] ➜ [ENTER]
2Press the numbered buttons to select a chapter or track. 
([WMA] [MP3] [JPEG] Press [ENTER] to register the selection.) 
≥Repeat steps 1 and 2 to program other items.
3Press [1PLAY].
∫When CD Mode is on (➜page 18)
[VCD] [CD] [WMA] [MP3]
You can program all the items on all the discs.
1Press the numbered buttons ([1] – [5]) to select a disc. 
2[WMA] [MP3]
 Press the numbered buttons to select a group.
(Press [ENTER] to register the selection.)
≥To select a 2-digit number
e.g.  To select 12: [1] ➜ [2] ➜ [ENTER]
3Press the numbered buttons to select a track.
([WMA] [MP3] Press [ENTER] to register the selection.)
≥To select a 2-digit number
e.g.  To select 12: [S10] ➜ [1] ➜ [2]
[WMA] [MP3] [1] ➜ [2] ➜ [ENTER]
≥Repeat steps 1 to 3 to program other items.
4Press [1PLAY].
To select an item using the cursor buttons
Press [ENTER] and [3,4] to select an item, and then press [ENTER] 
again to register.To change the selected program
1 Press [3,4] to select the program number.
2 Press the numbered buttons to change each item.
([WMA] [MP3]
 Press [ENTER] to register the selection.)
To clear the selected program
1 Press [3,4] to select the program number.
2 Press [CANCEL] (or press [3,4,2,1] to select “Clear” and press 
[ENTER]).
To clear the whole program
Select “Clear all” with [3,4,2,1] and press [ENTER]. 
The whole program is also cleared when the disc is moved out of the play 
position, the unit is turned off or another source is selected.
∫When CD Mode is off
[VCD] [CD]
You can play all the items on a disc in the play position in random 
order.
[DVD-V] [WMA] [MP3] [JPEG]
You can play selected item(s) on a disc in the play position in 
random order.
1[DVD-V] [WMA] [MP3] [JPEG]
Press [3,4] to select a group or a title.
([WMA] [MP3] [JPEG]
 Press [ENTER] to register the selection.)
2Press [1PLAY].
∫When CD Mode is on (➜page 18)
[VCD] [CD] [WMA] [MP3]
You can play all the items on all the discs in random order.
Press [1PLAY].
Program and Random play
Press [PLAY MODE] while stopped.Program and random playback screens appear sequentially.
Program__--------------------------------------------------------------------) Random
^---------- off (Cancel the program and random play) (_-----}
Program play (up to 32 items)
MODE PLAY
Program Playback
ENTERto select and pressPLAYto start
Disc No.T/GPlay
Clear
Clear allChoose a title and chapter.1C/T
e.g. [DVD-V]
T/G: Title / Group
C/T: Chapter, Content /
Tr a c k
Random play
DISCS.SRDTGKARAD.MIXMONOSLPST CTUSB
MODERDS
RNDPGMEQ
PRGSRDE.PLDDTS
CD DVDW1W2WS
Random Playback
TitleChoose a title.1
PLAYto start
to select
e.g. [DVD-V]
Random Playback
Press PLAY to start
DISCS.SRDTGKARAD.MIXMONOSLPST CTUSB
MODERDS
RNDPGMEQ
PRGSRDE.PLDDTS
CD DVDW1W2WS
e.g. [CD]
PT950 and 1050_En.book  Page 19  Thursday, December 21, 2006  1:48 PM 
						

							
RQTX0064
20
Playing data discs using navigation menus
Playing data discs using navigation menus
≥Select “Play as Data Disc” in Other Menu ( ➜page 24) when using
– HighMAT discs without using the HighMAT function, or
– DVD-RAM or DVD-R/RW discs containing MP3 or JPEG files.
To enjoy listening to WMA/MP3 contents while showing a JPEG image on 
the screen, select a JPEG file first and then select audio contents.
(The opposite order is not effective.)
∫ Using the submenu
1 While Navigation Menu ( ➜left) is displayed
Press [FUNCTIONS].
2 Press [ 3,4 ] to select an item and press [ENTER].
Items shown differ depending on the type of disc.
∫ Searching by a content or group title
Highlight a group title to search the group, or a content title to search 
its content.
1 While the submenu is displayed ( ➜above)
Press [ 3,4 ] to select “Find” and press [ENTER].
2 Press [ 3,4 ] to select a character and press [ENTER].
≥ Repeat to enter another character.
≥ Lower case characters are also searched.
≥ Press [ 6, 5  SLOW/SEARCH] to skip between A, E, I, O 
and U.
≥ Press [ 2] to erase a character.
≥ Leave the asterisk ( ¢) when you search for the titles including 
the character you enter.
≥ Erase the asterisk ( ¢) to search for the titles starting with the 
character you enter. To add the asterisk ( ¢) again, display the 
submenu again and select “Find”.
3 Press [ 1] to select “Find” and press [ENTER].
The search result screen appears.
4 Press [ 3,4 ] to select the content or group and press 
[ENTER].
Titles appear with CD Text disc playback.
Playing data discs
[WMA]  [MP3]  [JPEG]
Playing items in order (Playback Menu)
1Press [TOP MENU].≥ To exit the screen, press [TOP MENU].
2Press [ 3,4 ] to select “All”, “Audio” or “Picture” and 
press [ENTER].
Playing from the selected item (Navigation Menu)
1Press [MENU].≥ To exit the screen, press [MENU].
2Press [ 2] followed by [ 3,4 ] to select the group and 
press [ENTER].
3To play content in the group in orderPress [ENTER].To start play from the selected contentPress [ 3,4 ] to select and [ENTER].
, , , ENTERTOP MENU,
DIRECT NAVIGATOR
MENU,
PLAY LIST
,
FUNCTIONS
STOP SLOW/SEARCH
Numbered
buttons
ME NUTOPMENU
Playback Menu
ENTERto select and press
AllTotal 434
AudioTotal 7
PictureTotal 427
WMA/MP3/JPEG
WMA/MP3
JPEGe.g.
Navi
gation  Menu
Group  005/023 Content  0001/0004
Perfume
001 Brazilian 
002 Chinese 
003 Czech 
004 Hun garian 
006 Mexican
007 Philippine
008 Swedish
009 Piano
010 Vocal001 Lady Starfish
002 Metal Glue
003 Life on Jupiter
004 Starperson001 My favorite1
002 My favorite2
5JPEG002 My favorite2 005 Japanese 
001 Lady Starfish
005 Japanese 
Group and content number 
currently playing
: WMA/MP3
Content
Group
e.g.
Number currently selected : JPEG
Selecting a track using CD text
[CD]
1Press [TOP MENU] or [MENU].≥To exit the screen, press [TOP MENU] or [MENU].
2Press [ 3,4 ] to select the track and press [ENTER].≥Press [FUNCTIONS] to show the  playback condition and current 
position.
Multi
List
Tree
Thumbnail
All
Audio
Picture
Next  group
Previous  group
Help display
Find
Groups and contents are displayed.
Contents only
Groups only
Thumbnail images  [JPEG]
To go to next group  [WMA] [MP3]
To go to previous group  [WMA] [MP3]
WMA/MP3 and JPEG
WMA/MP3 only
JPEG only
To switch between guide messages and the
elapsed play time indicator
To search by a content or group title (➜below)
AFind
ME NUTOPMENU
CD
1.
2.
3.
4.
5.
6. 7.
8
Ashley at Prom
63 00
1/23Disc Title:       All By Artist
Disc Artist:     Pink Island
Track title:      Lon g John Platinum
Track Artist:   SHIPWRECKED
City Penguin
Formura one
Soccer Baseball
NeanderthalCartoons
T il bit
e.g. CD text
PT950 and 1050_En.book  Page 20  Tuesday, December 26, 2006  3: 39 PM