Home
>
Panasonic
>
DVD System
>
Panasonic Dvd Home Theater Sound System Sc Ht920 Operating Instructions
Panasonic Dvd Home Theater Sound System Sc Ht920 Operating Instructions
Have a look at the manual Panasonic Dvd Home Theater Sound System Sc Ht920 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31 RQT7696 Specifications SUBWOOFER SECTION [Active\subwoofer\SB-WA920] Ty p e1 way, 1 speaker system (Bass reflex) Speaker unit(s)Impedance 4 ≠ Woofer 20 cm (7 7/8z) Cone type Output sound pressure84 dB/W (1.0 m) Frequency range34 Hz – 220 Hz (j16 dB) 38 Hz – 190 Hz (j10 dB) Dimensions (WtHtD)285k418k475 mm (11 7/32zk1615/32zk1811/16z) Mass15 kg (33 lb.) SPEAKER SECTION [Front\speakers\SB-PF920] Ty p e2 way, 3 speaker system (Bass reflex) Speaker unit(s)Impedance 6 ≠ 1. Woofer 6.5 cm (2 1/2z) Cone type 2. Woofer 6.5 cm (21/2z) Cone type 3. Tweeter 6 cm (23/8z) Ring shaped dome type Input power (IEC)170 W§ (Max) Output sound pressure83 dB/W (1.0 m) Cross over frequency 7 kHz Frequency range92 Hz – 50 kHz (j16 dB) 110 Hz – 45 kHz (j10 dB) Dimensions (WtHtD)240k1138 (Max)/678 (Min)k240 mm [9 7/16zk4413/16z (Max)/2611/16z (Min)k97/16z] Speaker height adjustment range: 1138– 968 mm (4413/16z–381/8z) 796– 625 mm (3111/32z–2419/32z) [However, the height of the stand is fixed at 678 mm (2611/16z).] Mass4.1 kg (9 lb.) [Surround\speakers\SB-PS920] Ty p e2 way, 2 speaker system (Bass reflex) Speaker unit(s)Impedance 4 ≠ 1. Woofer 6.5 cm (2 1/2z) Cone type 2. Tweeter 6 cm (23/8z) Ring shaped dome type Input power (IEC)70 W (Max) Output sound pressure80 dB/W (1.0 m) Cross over frequency 5 kHz Frequency range95 Hz – 50 kHz (j16 dB) 110 Hz – 45 kHz (j10 dB) Dimensions (WtHtD)160k224k107 mm (6 5/16zk813/16zk47/32z) Mass1.5 kg (3.3 lb.) [Center\speaker\SB-PC920] Ty p e2 way, 3 speaker system (Bass reflex) Speaker unit(s)Impedance 4 ≠ 1. Woofer 6.5 cm (2 1/2z) Cone type 2. Woofer 6.5 cm (21/2z) Cone type 3. Tweeter 6 cm (23/8z) Ring shaped dome type Input power (IEC)270 W§ (Max) Output sound pressure82 dB/W (1.0 m) Cross over frequency 5 kHz Frequency range110 Hz – 50 kHz (j16 dB) 140 Hz – 45 kHz (j10 dB) Dimensions (WtHtD)320k97k93 mm (12 19/32zk313/16zk321/32z) Mass1.5 kg (3.3 lb.) GENERAL Power supplyAC 120 V, 60 Hz Power consumptionMain unit 26 W Subwoofer 390 W Dimensions (WtHtD)430k68k432 mm (1 615/16zk211/16zk17z) MassMain unit 4.1 kg (9.0 Ib.) Operating temperature ranger5 to r35 oC (r41 to r95 oF) Operating humidity range5 to 90 % RH (no condensation) § Rating with low cut filter equipped amplifier [Note] 1. Specifications are subject to change without notice. Mass and dimensions are approximate. 2. Total harmonic distortion is measured by digital spectrum analyzer. Power consumption in standby mode0.5 W
32 RQT7696 Troubleshooting guide Troubleshooting guide Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the “Customer Services Directory” on page 35 if you reside in the U.S.A., or refer to the “Product Information on page 34 if you reside in Canada. PowerPage Unresponsive or inoperable function Specific operation undesirable or unexpected Subtitle Marker A-B repeat Sound abnormal or improper No power.≥Insert the AC power supply cord and system cable securely.9 The unit is automatically switched to the standby mode.≥Sleep timer activated. 27 No response when any buttons pressed.≥This unit cannot play discs other than the ones listed in these operating instructions. ≥The unit may not be operating properly due to lightning, static electricity or some other external factor. Turn the unit off and then back to ON. Alternatively, turn the unit off, disconnect the AC power supply cord, and then reconnect it. ≥Condensation has formed: Wait 1 to 2 hours for it to evaporate. 11 — — No response when remote control buttons pressed.≥Check that the batteries are installed correctly. ≥The batteries are depleted. Replace them with new ones. ≥Point the remote control at the remote control sensor and operate.9 9 10 Cannot play DVDs.≥CD Mode is on. Press [CD MODE] to turn CD Mode off.13 No picture or sound.≥Check the video or audio connection. ≥Check the power or input setting of the connected equipment. ≥Check that the DVD-RAM has something recorded on it. 7– 9, 28 — — You have forgotten your ratings password. Reset all the settings to Factory Preset.≥While stopped and “DVD/CD” is the source, press and hold [∫] on the main unit and [S10] on the remote control until “Initialized” disappears from the television. Turn the unit off and on again. All settings will return to the default values.— It takes time before play starts. [MP3]≥Play may take time to begin when an MP3 track has still picture data. Even after the track starts, the correct play time will not be displayed. This is normal.— Folders deeper than the eighth layer on a data CD are not displayed correctly. [WMA] [MP3] [JPEG]≥Folders deeper than the eighth layer are displayed as the eighth layer.— A menu screen appears during skip or search. [VCD[≥This is normal for Video CDs.— Programmed items are not played. [DVD-V]≥Some items cannot be played even if you have programmed them.— The on-screen menu shows “2” as a soundtrack option when [AUDIO] is pressed, but the audio does not change. [DVD-A]≥Even if a second soundtrack isn’t recorded, two numbers will normally be shown.— Play restarts from the beginning of the track when soundtrack is changed. [DVD-A]≥This is normal on DVD-Audio.— Subtitle position is wrong.≥Adjust the position. (“Subtitle Position” in Display Menu)19 No subtitles.≥Display the subtitles.14 The subtitles overlap closed captions recorded on discs.≥Clear the subtitles.14 Cannot add markers.≥You cannot add markers with DVD-RAM. ≥If the disc’s elapsed play time doesn’t appear on the unit’s display, you cannot add markers.— — Point B is automatically set.≥The end of an item becomes point B when it is reached.— A-B repeat is automatically canceled.≥A-B repeat is canceled when you press [QUICK REPLAY].— Sound distorted.≥Noise may occur when playing WMA files.— Effects do not work.≥Some audio effects do not work or have less effect with some discs. ≥Multi Re-master and Dolby Pro Logic II do not work if you have changed the play speed.— — Humming heard during play.≥An AC power supply cord or fluorescent light is near the subwoofer. Keep other appliances and cables away from the subwoofer.—
33 RQT7696 Troubleshooting guide Menus Page Picture abnormal or un-viewable Progressive video Listening to the radio Television operation Unit displays Television displays The Setup menu cannot be accessed.≥Select “DVD/CD” as the source. ≥Cancel all group, program and random play.— 15 Picture distorted.≥Ensure that the unit is connected directly to the television, and is not connected through a video cassette recorder.8 Picture size doesn’t fit the screen.≥Change “TV Aspect” in “Video” tab. ≥Use the television to change the aspect. If your television does not have that function, change “4:3 Aspect” in Display Menu. ≥Change the Zoom setting. ≥The images on PAL system DVD-Audio are compressed for display. They may also appear vertically stretched.20 19 14 — Menu not displayed correctly.≥Restore the zoom ratio to a1.00. ≥Set “Subtitle Position” in Display Menu to “0”. ≥Set “4:3 Aspect” in Display Menu to “Normal”.14 19 19 Auto zoom function does not work well.≥Turn off TV’s zoom function. ≥Use the other preset aspect ratios or manual adjustment. ≥Zoom function may not work well, especially in dark scenes and may not work depending on the type of disc.— 14 — The picture on the television disappears or stripes appear on the screen.≥Mobile telephone chargers can cause some disturbance. ≥If you are using a TV indoor antenna, change to an outdoor antenna. ≥The television antenna wire is too close to the unit. Separate the antenna wire of the television from the unit. — 23 — There is ghosting when progressive output is on.≥Change “Video Output Mode” in Picture Menu to “480I”. This problem is caused by the editing method or material used on DVD-Video, but should be corrected if you use interlace output.19 Pictures not in progressive output.≥Press [PROGRESSIVE] on the main unit so “PROG.” is displayed. Or select “480P” in “Video Output Mode” in Picture Menu. ≥If the unit is connected to the television through VIDEO OUT or S-VIDEO OUT output will be interlace.12, 19 8 Closed captions not displayed.≥When progressive output is on, closed captions will not be displayed.— Noise is heard. “ST” flickers or doesn’t light. Sound is distorted.≥Adjust the position of the FM or AM antenna. ≥Use an outdoor antenna.— 23 A beat sound is heard.≥Turn the television off or separate it from the unit.— A low hum is heard during AM broadcasts.≥Separate the antenna from other cables.— Cannot operate the TV.≥Press [TV] first to operate the television. ≥Check the remote control code for the TV manufacturer.— 29 The display is dark.≥Select “Bright” in “FL Dimmer” in “Others” tab.21 “NO PLAY”≥You inserted a disc the unit cannot play; insert one it can. ≥You inserted a blank disc.11 — “NO DISC”≥You haven’t inserted a disc; insert one. ≥You haven’t inserted the disc correctly; insert it correctly.— 12 “F61”≥Check and correct the speaker cord connections. If this does not fix the problem, there is a power supply problem. Consult the dealer.5, 7 “DVD U11”≥Disc is dirty. Wipe it clean.11 “ERROR”≥Incorrect operation performed. Read the instructions and try again.— “DVD H∑∑” ∑∑ stands for a number.≥Trouble may have occurred. The number following “H” depends on the status of the unit. Turn the unit off and then back to ON. Alternatively, turn the unit off, disconnect the AC power supply cord, and then reconnect it. ≥If the service numbers fail to clear, note the service number and contact a qualified service person.— — “/”≥The operation is prohibited by the unit or disc.— “Cannot display group xx, content xx”≥You are trying to display incompatible contents.17 “This disc may not be played in your region”≥You can only play DVD-Video if their region number is the same or includes the same region number as the unit or if the DVD-Video is marked “ALL”. Confirm the region number for the unit on the rear panel.Cover No on-screen display.≥Select “On” in “On-Screen Messages” in “Display” tab.21
34 RQT7696 Product service/Maintenance/Glossary Product service 1. Damage requiring service— The unit should be serviced by qualified service personnel if: (a) The AC power supply cord or AC adaptor has been damaged; or (b) Objects or liquids have gotten into the unit; or (c) The unit has been exposed to rain; or (d) The unit does not operate normally or exhibits a marked change in performance; or (e) The unit has been dropped or the cabinet damaged. 2. Servicing —Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel. 3. Replacement parts— When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards. 4. Safety check— After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition. The servicer will require all components to service your system. Therefore, should service ever be necessary, be sure to bring the entire system. For product information or assistance with product operation: In the U.S.A., refer to “Customer Services Directory” on page 35. In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, or visit the website (www.panasonic.ca), or an authorized Servicentre closest to you. Clean this unit with a soft, dry cloth. ≥Never use alcohol, paint thinner or benzine to clean this unit. ≥Before using chemically treated cloth, carefully read the instructions that came with the cloth. Product information Maintenance Before moving the unit, ensure the disc trays are empty. Failure to do so will risk severely damaging the discs and the unit. Glossary Decoder A decoder restores the coded audio signals on DVDs to normal. This is called decoding. Dolby Digital This is a method of coding digital signals developed by Dolby Laboratories. Apart from stereo (2-channel) audio, these signals can also be multi-channel audio. A large amount of audio information can be recorded on one disc using this method. DTS (Digital Theater Systems) This surround system is used in many movie theaters around the world. There is good separation between the channels, so realistic sound effects are possible. Dynamic range Dynamic range is the difference between the lowest level of sound that can be heard above the noise of the equipment and the highest level of sound before distortion occurs. Frame still and field still Frames are the still pictures that go together to make a moving picture. There are about 30 frames shown each second. One frame is made up of two fields. A regular television shows these fields one after the other to create frames. A still is shown when you pause a moving picture. A frame still is made up of two alternating fields, so the picture may appear blurred, but overall quality is high. A field still is not blurred, but it has only half the information of a frame still so picture quality is lower. I/P/B MPEG 2, the video compression standard adopted for use with DVD-Video, codes frames using these 3 picture types. I:Intra coded picture This picture has the best quality and is the best to use when adjusting the picture. P:Predictive coded picture This picture is calculated based on past I or P-pictures. B:Bidirectionally-predictive coded picture This picture is calculated by comparing past and future I and P-pictures so it has the lowest volume of information. Linear PCM (pulse code modulation) These are uncompressed digital signals, similar to those found on CDs. Playback control (PBC) If a Video CD has playback control, you can select scenes and information with menus. Sampling frequency Sampling is the process of converting the heights of sound wave (analog signal) samples taken at set periods into digits (digital encoding). Sampling frequency is the number of samples taken per second, so larger numbers mean more faithful reproduction of the original sound. Abkhazian: 6566 Afar: 6565 Afrikaans: 6570 Albanian: 8381 Ameharic: 6577 Arabic: 6582 Armenian: 7289 Assamese: 6583 Aymara: 6588 Azerbaijani: 6590 Bashkir: 6665 Basque: 6985 Bengali; Bangla:6678 Bhutani: 6890 Bihari: 6672 Breton: 6682 Bulgarian: 6671 Burmese: 7789 Byelorussian: 6669 Cambodian: 7577 Catalan: 6765Chinese: 9072 Corsican: 6779 Croatian: 7282 Czech: 6783 Danish: 6865 Dutch: 7876 English: 6978 Esperanto: 6979 Estonian: 6984 Faroese: 7079 Fiji: 7074 Finnish: 7073 French: 7082 Frisian: 7089 Galician: 7176 Georgian: 7565 German: 6869 Greek: 6976 Greenlandic: 7576 Guarani: 7178 Gujarati: 7185Hausa: 7265 Hebrew: 7387 Hindi: 7273 Hungarian: 7285 Icelandic: 7383 Indonesian: 7378 Interlingua: 7365 Irish: 7165 Italian: 7384 Japanese: 7465 Javanese: 7487 Kannada: 7578 Kashmiri: 7583 Kazakh: 7575 Kirghiz: 7589 Korean: 7579 Kurdish: 7585 Laotian: 7679 Latin: 7665 Latvian, Lettish: 7686 Lingala: 7678Lithuanian: 7684 Macedonian: 7775 Malagasy: 7771 Malay: 7783 Malayalam: 7776 Maltese: 7784 Maori: 7773 Marathi: 7782 Moldavian: 7779 Mongolian: 7778 Nauru: 7865 Nepali: 7869 Norwegian: 7879 Oriya: 7982 Pashto, Pushto: 8083 Persian: 7065 Polish: 8076 Portuguese: 8084 Punjabi: 8065 Quechua: 8185 Rhaeto-Romance:8277Romanian: 8279 Russian: 8285 Samoan: 8377 Sanskrit: 8365 Scots Gaelic: 7168 Serbian: 8382 Serbo-Croatian: 8372 Shona: 8378 Sindhi: 8368 Singhalese: 8373 Slovak: 8375 Slovenian: 8376 Somali: 8379 Spanish: 6983 Sundanese: 8385 Swahili: 8387 Swedish: 8386 Tagalog: 8476 Tajik: 8471 Tamil: 8465 Tatar: 8484Telugu: 8469 Thai: 8472 Tibetan: 6679 Tigrinya: 8473 Tonga: 8479 Turkish: 8482 Turkmen: 8475 Twi: 8487 Ukrainian: 8575 Urdu: 8582 Uzbek: 8590 Vietnamese: 8673 Volapük: 8679 Welsh: 6789 Wolof: 8779 Xhosa: 8872 Yiddish: 7473 Yoruba: 8979 Zulu: 9085 Language code list
35 RQT7696 Limited Warranty (ONLY FOR U.S.A.) Limited Warranty (ONLY FOR U.S.A.) Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Panasonic Audio Products Limited Warranty Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor. During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. You must carry-in or mail-in your product during the warranty period. If non-rechargeable batteries are included, they are not warranted. This warranty only applies to products purchased and serviced in the United States or Puerto Rico. This warranty is extended only to the original purchaser of a new product which was not sold “as is”. A purchase receipt or other proof of the original purchase date is required for warranty service.Carry-In or Mail-In Service For Carry-In or Mail-In Service in the United States call 1-800-211-PANA (1-800-211-7262) or visit Panasonic web site: http://www.panasonic.com For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax (787)-768-2910. Limited Warranty Limits And Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or commercial use (such as in a hotel, office, restaurant, or other business), rental use of the product, service by anyone other than a Factory Servicenter or other Authorized Servicer, or damage that is attributable to acts of God. THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, travel to and from the servicer, loss of media or images, data or other memory content. The items listed are not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Servicenter. If the problem is not handled to your satisfaction, then write to the warrantor’s Consumer Affairs Department at the addresses listed for the warrantor. PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY. F1003 Product or Part Name Parts Labor Audio Products (except items listed below)One (1) year One (1) year All Audio Racks (cabinets) Thirty (30) daysNot Applicable Stand Alone Speakers, Subwoofer SpeakersThree (3) years Three (3) years USB Reader-Writer, Personal Computer Card Adapters (in exchange for defective item)One (1) year Not Applicable Accessories: Headphones, Cartridges, Microphones, AdaptersNinety (90) daysNinety (90) days Rechargeable Batteries, DVD-R/-RAM Discs (in exchange for defective item)Ten (10) days Not Applicable SD Memory Cards, Rechargeable Battery Packs (in exchange for defective item)Ninety (90) daysNot Applicable Customer Services Directory Obtain Product Information and Operating Assistance; locate your nearest Dealer or Servicenter; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/support or, contact us via the web at: http://www.panasonic.com/contactinfo You may also contact us directly at: 1-800-211-PANA (7262), Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST. For hearing or speech impaired TTY users, TTY : 1-877-833-8855 Accessory Purchases Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at: http://www.pasc.panasonic.com or, send your request by E-mail to: [email protected] You may also contact us directly at: 1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday – Friday 9 am to 8 pm, EST.) Panasonic Services Company 20421 84th Avenue South, Kent, WA 98032 (We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks) For hearing or speech impaired TTY users, TTY : 1-866-605-1277 Service in Puerto Rico Matsushita Electric of Puerto Rico, Inc. Panasonic Sales Company Factory Servicenter: Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Phone (787)750-4300, Fax (787)768-2910
User memo: Listening caution Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion—and, most importantly, without affecting your sensitive hearing. We recommend that you avoid prolonged exposure to excessive noise. Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts. To establish a safe level: ≥Start your volume control at a low setting. ≥Slowly increase the sound until you can hear it comfortably and clearly, and without distortion. Once you have established a comfortable sound level: ≥Set the dial and leave it there. Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for a lifetime. DATE OF PURCHASE ______________________________ DEALER NAME ___________________________________ DEALER ADDRESS ________________________________ _________________________________________________ TELEPHONE NUMBER _____________________________ The model number and serial number of this product can be found on either the back or the bottom of the unit. Please note them in the space provided below and keep for future reference. MODEL NUMBER SERIAL NUMBER EST. 1924 Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. “DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc. Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and 4,819,098, licensed for limited viewing uses only. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson multimedia. Windows Media, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. WMA is a compression format developed by Microsoft Corporation. It achieves the same sound quality as MP3 with a file size that is smaller than that of MP3. HighMAT™ and the HighMAT logo are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. , HDCD ®, High Definition Compatible Digital® and Pacific Microsonics™ are either registered trademarks or trademarks of Pacific Microsonics, Inc. in the United States and/ or other countries. HDCD system manufactured under license from Pacific Microsonics, Inc. This product is covered by one or more of the following: In the USA: 5,479,168, 5,638,074, 5,640,161, 5,808,574, 5,838,274, 5,854,600, 5,864,311, 5,872,531, and in Australia: 669114, with other patents pending. Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 http://www.panasonic.com Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. (“PSC”) Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Panasonic Canada Inc. 5770 Ambler Drive Mississauga, Ontario L4W 2T3 www.panasonic.ca C 2004 Matsushita Electric Industrial Co., Ltd. RQT7696-1P Printed in SingaporeF0204YM1034 p SC-HT920