Panasonic Dvd Home Theater Sound System Sc Ht730 Operating Instructions

21
RQT7972
Using on-screen menus
∫Play Menu
(Only when the elapsed play time can be displayed.
[JPEG]: Works with all JPEG content.)
∫Picture Menu∫Audio Menu
∫Display Menu
∫Other Menu
Other Settings
Play Speed
[DVD-A] (Motion picture part) [RAM] [DVD-V]
To change play speed
–from “k0.6” to “k1.4” (in 0.1 unit steps)
Repeat(‹page 15, Repeat play)
A-B Repeat
Except [JPEG] [RAM] (Still picture part)
To repeat a specified section
Press [ENTER] at the starting and ending points. 
Press [ENTER] again to...

22
RQT7972
Changing the player settings
Changing the player settings
≥The settings remain intact even if you switch the unit to standby.
≥Underlined items are the factory preset in the following diagram.
∫“Disc” tab
§1The original language designated on the disc is selected.§2Input a code number referring to the table on page 34.
§3If the language selected for “Audio” is not available, subtitles 
appear in that language (if available on the disc).
∫“Video” tab
VOLUME
CH
SKIPSLOW/SEARCH
MENU
DIRECT...

23
RQT7972
Changing the player settings
∫“Audio” tab
∫“Display” tab
∫“Others” tab
(Effective when playing multi-channel audio)
(Center and surround speakers only)
For optimum listening with 5.1-channel sound, all the speakers, 
except for the subwoofer, should be the same distance from the 
seating position. If you have to place the center or surround 
speakers closer to the seating position, adjust the delay time to 
make up for the difference.
If either distance a or b is less than c, find the...

24
RQT7972
The radio
The radio
Up to 15 stations can be set in each band, FM and AM.
1Press [INPUT SELECTOR] to select “FM” or 
“AM”
.
2Press [TUNE MODE] to select “MANUAL”.
Each time you press the button: MANUAL()PRESET
3Press [XTUNINGW] to tune to the lowest 
frequency (FM: 87.9 or 87.5, AM: 520).
4Press and hold [MEMORY].
Release the button when “FM AUTO” or “AM AUTO” is 
displayed.
The tuner presets all the stations it can receive into the 
channels in ascending order.
≥“SET OK” is displayed when the...

25
RQT7972
The radio
∫FM frequency step
You can change the FM step. The step is factory-set to 0.2 MHz, but 
you can change it to receive broadcasts allocated in 0.1-MHz steps.
1 Press [INPUT SELECTOR] to select “FM”.
2 Press and hold [INPUT SELECTOR].
After a few seconds the display changes to show the current 
minimum frequency. Continue to hold the button down. The 
minimum frequency changes and the step is changed.
To return to the original step, repeat the above steps.
[Note]
Any FM/AM frequencies...

26
RQT7972
Sound field and sound quality
Sound field and sound quality
[Note]
≥When connected with headphones, the following sound field 
systems have no effect. (Excluding Sound Field Control)
≥You may experience a reduction in sound quality when these 
sound field systems are used with some sources. If this occurs, 
turn the sound field system off.
≥If you turn on Super Surround, Dolby Pro LogicII is canceled and 
vice versa.
Changes the sound quality.
Press [SFC].
Each time you press the button:...

27
RQT7972
Sound field and sound quality/Other useful functions
You can adjust the amount of bass. The unit automatically selects 
the most suitable setting according to the type of playing source.
Press [SUBWOOFER LEVEL].
≥When DVD-Video or DVD-RAM is selected
SUB W 4 (factory preset)>SUB W 1>SUB W 2>SUB W 3
^--------------------------------------------------------------------------}
≥When another source is selected
SUB W 2 (factory preset)>SUB W 3>SUB W 4>SUB W 1...

28
RQT7972
Operating other equipment
Operating other equipment
∫Connection example
You can use the remote control to operate a Panasonic television or a video cassette recorder. Connect your equipment referring to “Connection 
example” (‹above).
[Note]
The remote control may not work properly with some models.
Preparation
Aim the remote control at the unit and press [TV] to light up the 
button, and then aim it at the television for the following operations:
Turning the television on/off
Press [ÍAV...

29
RQT7972
Other speaker setup options
Operating other equipment
This remote control can also operate some other brands of 
televisions and video cassette recorders. Change the code to 
operate such equipment (‹below).
Aim the remote control at the equipment.
While pressing [TV] or [VCR]
Press a numbered button to enter the first 
digit, and then the second digit.
The remote control outputs the on/off signal. If the code is correct, 
the equipment turns on or off. If it doesn’t, try entering another...

30
RQT7972
Specifications
Specifications
AMPLIFIER SECTION
[HT730]
RMS Output Power: Dolby Digital Mode
Front Ch 70 W per channel (4≠), 1 kHz, 10 % THD
Surround Ch  70 W per channel (4≠), 1 kHz, 10 % THD
Center Ch  260 W per channel (4≠), 1 kHz, 10 % THD
Subwoofer Ch  260 W per channel (4≠), 100 Hz, 10 % THD
Total RMS Dolby Digital mode power  800 W
FTC Output Power: Dolby Digital Mode
Front Ch 45 W per channel (4 ≠), 120 Hz–20 kHz, 1 % THD
Surround Ch
45 W per channel (4 ≠), 120 Hz–20 kHz, 1 % THDCenter...