Home
>
Panasonic
>
DVD System
>
Panasonic Dvd Home Theater Sound System Sc Ht680 Operating Instructions
Panasonic Dvd Home Theater Sound System Sc Ht680 Operating Instructions
Here you can view all the pages of manual Panasonic Dvd Home Theater Sound System Sc Ht680 Operating Instructions . The Panasonic manuals for DVD System are available online for free. You can easily download all the documents as PDF.
Page 21
21 RQT7969 Changing the player settings ∫“Audio” tab ∫“Display” tab ∫“Others” tab (Effective when playing multi-channel audio) (Center and surround speakers only) For optimum listening with 5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position. If you have to place the center or surround speakers closer to the seating position, adjust the delay time to make up for the difference. If either distance a or b is less than c, find the...
Page 22
22 RQT7969 Sound field and sound quality Sound field and sound quality [Note] ≥When connected with headphones, the following sound field systems have no effect. (Excluding Sound Field Control) ≥You may experience a reduction in sound quality when these sound field systems are used with some sources. If this occurs, turn the sound field system off. ≥If you turn on Super Surround, Dolby Pro LogicII is canceled and vice versa. Changes the sound quality. Press [SFC]. Each time you press the button:...
Page 23
23 RQT7969 This is one of the ways to get appropriate surround effects. Preparation Press [DVD/CD]. 1While stopped and no on-screen display is shown Press [SHIFT]i[TEST] to output a test signal. L: Front left C: Center R: Front right RS: Right surround LS: Left surround ≥There is no output from SW (subwoofer) channel. 2Press [VOLUME, r] or [s] to set the volume level normally used for listening. 3Press [3] (increase) or [4] (decrease) to adjust the speaker level for each speaker. C, RS, LS: `6dB to...
Page 24
24 RQT7969 The radio The radio Up to 15 stations can be set in each band, FM and AM. 1Press [SELECTOR] to select “FM” or “AM”. 2Press [TUNE MODE] to select “MANUAL”. Each time you press the button: MANUAL()PRESET 3Press [XTUNINGW] to tune to the lowest frequency (FM: 87.9 or 87.5, AM: 520). 4Press and hold [MEMORY]. Release the button when “FM AUTO” or “AM AUTO” is displayed. The tuner presets all the stations it can receive into the channels in ascending order. ≥“SET OK” is displayed when the...
Page 25
25 RQT7969 Operating other equipment Operating other equipment You can use the remote control to operate a Panasonic television or a video cassette recorder. Connect your equipment referring to “Connection example” (➜above). [Note] The remote control may not work properly with some models. Preparation Aim the remote control at the unit and press [TV] to light up the button, and then aim it at the television for the following operations: Turning the television on/off Press [ÍAV SYSTEM]. Switching the...
Page 26
26 RQT7969 Other speaker setup options Other speaker setup options ∫Attaching to a wall You can attach all of the speakers to a wall. 1Drive a screw (not included) into the wall. 2Fit the speaker securely onto the screw(s) with the hole(s). ≥The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg (22 lbs) per screw. Consult a qualified building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers....
Page 27
27 RQT7969 Specifications Specifications AMPLIFIER SECTION RMS Output Power: Dolby Digital Mode Front Ch 55 W per channel (6 ≠), 1 kHz, 10 % THD Surround Ch 55 W per channel (6 ≠), 1 kHz, 10 % THD Center Ch 160 W per channel (6 ≠), 1 kHz, 10 % THD Subwoofer Ch 220 W per channel (4 ≠), 100 Hz, 10 % THD Total RMS Dolby Digital mode power 600 W FTC Output Power: Dolby Digital Mode Front Ch 35 W per channel (6 ≠), 120 Hz – 20 kHz, 1 % THD Surround Ch 35 W per channel (6 ≠), 120 Hz – 20 kHz, 1 % THD...
Page 28
28 RQT7969 Troubleshooting guide Troubleshooting guide Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the chart do not solve the problem, refer to the “Customer Services Directory” on page 31 if you reside in the U.S.A., or refer to the “Product information” on page 30 if you reside in Canada. PowerPage Unresponsive or inoperable function Specific operation undesirable or unexpected Subtitle Marker A-B repeat...
Page 29
29 RQT7969 Troubleshooting guide Menus Page Picture abnormal or unviewable Progressive video Listening to the radio Television operation Unit displays Television displays The Setup menu cannot be accessed.≥Select “DVD/CD” as the source. ≥Cancel program and random play.— 14 Picture distorted.≥Ensure that the unit is connected directly to the television, and is not connected through a video cassette recorder.6 Picture size doesn’t fit the screen.≥Change “TV Aspect” in the “Video” tab. ≥Change the Zoom...
Page 30
30 RQT7969 Product Service/Maintenance/Glossary Product Service 1. Damage requiring service— The unit should be serviced by qualified service personnel if: (a) The AC power supply cord or AC adaptor has been damaged; or (b) Objects or liquids have gotten into the unit; or (c) The unit has been exposed to rain; or (d) The unit does not operate normally or exhibits a marked change in performance; or (e) The unit has been dropped or the cabinet damaged. 2. Servicing —Do not attempt to service the unit...