Home
>
Panasonic
>
DVD System
>
Panasonic Dvd Home Theater Sound System Sc Ht67 Operating Instructions
Panasonic Dvd Home Theater Sound System Sc Ht67 Operating Instructions
Have a look at the manual Panasonic Dvd Home Theater Sound System Sc Ht67 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
P DVD Home Theater Sound System Operating Instructions Model No. SC-HT67 RQT6191-P Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. As an ENERGY STAR® Partner, Panasonic has determined that this product meets the ENERGYSTAR® guidelines for energy efficiency. The servicenter list and warranty can be found on pages 34 and 35. The region number of this unit is “1”. You can play DVD-Video marked “1”, “ALL”, or with a re- gion number including “1”. Example: See page 5 for details. 1ALL2 4 1
Getting started RQT6191 2 CAUTION!THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORM- ANCE OF PROCEDURES OTHER THAN THOSE SPECI- FIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. CAUTION: TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION! DO NOT INSTALL, OR PLACE THIS UNIT, IN A BOOK- CASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZ- ARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS. CAUTION:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio commu- nications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ≥Reorient or relocate the receiving antenna. ≥Increase the separation between the equipment and re- ceiver. ≥Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ≥Consult the dealer or an experienced radio/TV technician for help. Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device. This device complies with Part 15 of the FCC Rules. Opera- tion is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi- cient magnitude to constitute a risk of electric shock to persons. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the ap- pliance. RISK OF ELECTRIC SHOCK DO NOT OPEN (Inside of product)RQLS0233 - - - - - - - - - - VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. DANGER(FDA 21 CFR) (IEC60825-1)VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM. CAUTIONRAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS D’OUVERTURE. EXPOSITION DANGEREUSE AU FAISCEAU.ATTENTIONSYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING. UNDGÅ UDSÆTTELSE FOR STRÅLING.ADVARSELAVATTAESSA OLET ALTTIINA NÄKYVÄÄ JA NÄKYMÄTÖN LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.VA R O !SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD. BETRAKTA EJ STRÅLEN.VARNING SYNLIG OG USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES. UNNGÅ EKSPONERING FOR STRÅLEN.ADVARSELSICHTBARE UND UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET. NICHT DEM STRAHL AUSSETZEN.VORSICHT Operations in these instructions are described mainly with the remote control, but you can do the operations on the main unit if the controls are the same. Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. System Main unit Front and surround speakers Center speaker Subwoofer SC-HT67 SA-HT67 SB-AFC95 SB-PC89 SB-W95 WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOIS- TURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
3 Getting started RQT6191 Table of contents Getting started Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . 14 Disc information . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Disc handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Simple setup STEP 1 Locating and connecting the speakers . . 6 STEP 2 Television, antennas and AC power supply cord . . . . . . . . . . . . . . . . . . . . . . . 8 STEP 3 The remote control . . . . . . . . . . . . . . . . 9 STEP 4 Quick Setup . . . . . . . . . . . . . . . . . . . . . . 9 Control reference guide . . . . . . . . . . . . . . . . . . . . 10 Disc operations Discs—Basic play . . . . . . . . . . . . . . . . . . . . . . . . . 11Using menus to play MP3 discs . . . . . . . . . . . . . . . . . . . . . . . 12 Resume function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Skipping chapters or tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Fast forward and rewind—SEARCH . . . . . . . . . . . . . . . . . . . . 13 Slow-motion play/Frame-by-frame viewing . . . . . . . . . . . . . . . 13 Starting play from a selected track . . . . . . . . . . . . . . . . . . . . . 13 Disc skip/Cinema . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Marking places to play again—MARKER . . . . . . . . . . . . . . . . . . 13 Discs—Convenient functions . . . . . . . . . . . . . . . 14A-B repeat play/Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Subtitles/Soundtracks/Angles . . . . . . . . . . . . . . . . . . . . . . . . . 14 Using the disc manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Program play/Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Using On-Screen Menu Icons . . . . . . . . . . . . . . . 16Common procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Progress indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Disc information/Unit information . . . . . . . . . . . . . . . . . . . . . . 17 Radio operations The radio: manual tuning . . . . . . . . . . . . . . . . . . . 18 The radio: preset tuning . . . . . . . . . . . . . . . . . . . . 19 Sound quality/sound field operations Sound field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20DOLBY DIGITAL/DOLBY PRO LOGIC . . . . . . . . . . . . . . . . . . 21 Changing sound field and quality . . . . . . . . . . . . . . . . . . . . . . 21 SUPER SURROUND/SEAT POSITION/CENTER FOCUS . . 22 Adjusting the bass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Other functions Convenient functions . . . . . . . . . . . . . . . . . . . . . . 23Muting the volume/Turning off the display . . . . . . . . . . . . . . . . 23 Timer functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Using headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Changing settings . . . . . . . . . . . . . . . . . . . . . . . . . 24Common procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Entering a password (Ratings)/Changing the delay time . . . . 25 Using the remote control with other equipment . . 26Operating a television/Operating a video cassette recorder . . 26 Changing the remote control code . . . . . . . . . . . . . . . . . . . . . 27 Listening to an external source/ Recording to other equipment . . . . . . . . . . . . . 28 Optional antenna connections . . . . . . . . . . . . . . . 29 Reference Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . 30 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Language code list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Servicenter List . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Product Service . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Accessories Please check and identify the supplied accesso- ries. Use numbers indicated in parentheses when asking for replacement parts. To order accessories contact 1-800-332-5368 or web site (http://www.panasonic.com). ∏1 Remote control (EUR7502XD0) ∏2 Batteries for remote control ∏1 AM loop antenna set (RSA0012) ∏1 FM indoor antenna (RSA0006-J)∏1 AC power supply cord (RJA0065-1D) ∏1 Video cable (RJL1P016B15A) ∏1 Sheet of speaker feet (RFA0631A-K) Replacements sold in sets of 4. ∏1 Sheet of speaker-cord stickers (12 stickers) One set is extra. The sheet cannot be purchased separately. 1 1FRONT LFRONT L2 2FRONT RFRONT R3 3SURROUND LSURROUND L4 4SURROUND RSURROUND R5 5CENTERCENTER6 6SUBWOOFERSUBWOOFER 1 1FRONT LFRONT L2 2FRONT RFRONT R3 3SURROUND LSURROUND L4 4SURROUND RSURROUND R5 5CENTERCENTER6 6SUBWOOFERSUBWOOFER
Getting started RQT6191 4 3. Power lines—Take care when setting up an outdoor antenna that it is not near overhead power lines, electric lights, or electri- cal circuits, and that there is no danger of the antenna falling on power lines, electric lights, or electrical circuits. When installing an outdoor antenna, take extreme care not to touch such power lines or circuits, as contact with them can be fatal. 4. Outdoor antenna grounding—If you connect an outdoor an- tenna, ground the antenna system to protect against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1990, provides information about grounding of the mast and supporting structure, ground- ing of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, con- nection to grounding electrodes, and requirements for the grounding electrode. Refer to this diagram. Maintenance (See page 31 for details.) Unplug the unit from the household AC outlet before cleaning. Clean with a damp cloth. Do not use abrasive pads, scouring powders, or solvents. Service 1. Damage requiring service—The unit should be serviced by qualified service personnel if: (a) The AC power supply cord or the plug has been damaged; or (b) Objects or liquids have gotten into the unit; or (c) The unit has been exposed to rain; or (d) The unit does not operate normally or exhibits a marked change in performance; or (e) The unit has been dropped or the cabinet damaged. 2. Servicing—Do not attempt to service the unit beyond that de- scribed in these operating instructions. Refer all other servicing to authorized servicing personnel. 3. Replacement parts—When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unautho- rized substitutes may result in fire, electric shock, or other hazards. 4. Safety check—After repairs or service, ask the servicer to per- form safety checks to confirm that the unit is in proper working condition. ELECTRIC SERVICE EQUIPMENTGROUND CLAMPANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) NEC—NATIONAL ELECTRICAL CODE IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the safety precautions listed below. Keep these operating instructions handy for future reference. Safety 1. Power source—Connect the unit to a power source of the type described in these instructions or as marked on the unit. 2. Polarization—The unit is equipped with a polarized power plug where one blade is wider than the other. This safety feature en- sures that the plug fits into your household AC outlet only one way. If the plug doesn’t fit one way, try reversing it. If the plug still doesn’t fit, contact an electrician to replace the obsolete out- let. Do not attempt to defeat the safety purpose of the plug. 3. Power cord protection—Route the AC power supply cord so that it will not be walked on or pinched by items placed on or against it. Never take hold of the plug or cord with wet hands. Always grasp the plug body firmly when connecting and discon- necting it. 4. Overloading—When connecting the AC power supply cord, be careful not to overload the household AC outlet, extension cord, or outlet from any other device as this can result in fire or elec- tric shock. 5. Nonuse periods—Turn the unit off when it is not in use. Unplug the unit from the household AC outlet if it is not to be used for a long time. Unplug the unit during lightning storms. 6. Attachments and accessories—Use only the attachments and accessories recommended in these operating instructions. Installation Placement 1. Ventilation—Situate the unit so that it receives proper ventila- tion. Do not install in a confined space such as a bookcase or cabinet. Allow at least 10 cm (4 inches) clearance from the rear of the unit. To prevent the risk of electric shock or fire due to overheating ensure curtains and other materials do not obstruct the unit’s ventilation. 2. Foreign material—Ensure objects and liquids do not get into the unit. Avoid exposing the unit to excessive smoke, dust, me- chanical vibration, and shock. 3. Magnetism—Situate the unit away from equipment and devices that generate strong magnetic fields. 4. Stacking—Do not place heavy objects on top of this unit. 5. Surface—Place the unit on a flat, level surface. 6. Carts and stands—Use the unit only with carts and stands recommended by the manufacturer. Move carts with care. Sudden stops, excessive force, and uneven surfaces can cause carts to overturn. 7. Wall and ceiling mounting—Do not mount the unit on walls or ceilings unless specified in the instructions. Environment 1. Water and moisture—Do not use the unit near water, such as near a bathtub or swimming pool. Avoid damp basements. 2. Heat—Situate the unit away from heat sources, such as radiators. Do not situate where temperatures fall below 5oC (41oF) or rise above 35oC (95oF).
5 Getting started RQT6191 Disc information ∫Discs that can be played Disc handling Do not use irregularly shaped discs, such as heart-shaped. (These can damage the unit.) ∫How to hold a disc Do not touch the recorded surface. ∫If the surface is dirtyWipe it with a damp cloth and then wipe dry. ∫If the disc is brought from a cold to a warm environment, moisture may form on the disc Wipe with a soft, dry, lint-free cloth before using the disc. ∫Handling precautions≥Do not write on the label side with a ball-point pen or other writing instrument. ≥Do not use record cleaning sprays, benzine, thinner, static electric- ity prevention liquids or any other solvent. ≥Do not attach labels or stickers to discs. (Do not use discs with exposed adhesive from tape or left over peeled-off stickers.) ≥Do not use scratch-proof protectors or covers. ≥Do not use discs printed with label printers available on the market. ∫Do not place or store discs in the following places ≥Locations exposed to direct sunlight ≥Humid or dusty locations ≥Locations directly exposed to a heat vent or heating appliance ∫To prevent damage≥Load only 1 disc per tray. ≥Load discs as shown in figure. ≥An adaptor is not needed with 8 cm (3q) discs (singles). ≥Set the system on a flat, level surface. Do not set it on top of magazines, inclined surfaces, etc. ≥Do not move the system while trays are opening/closing, or when loaded. ≥Do not put anything except discs in trays. ≥Do not use cleaning discs or discs which are badly warped or cracked. ∫Discs that cannot be playedDVD-Audio, PAL discs, DVD-ROM, DVD-RAM, CD-ROM, CDV, CD-G, iRW, DVD-RW, CVD, SVCD, SACD, Divx Video Discs and Photo CD. ∫ Region Management Information (DVD-Video only) This unit responds to the Region Management Information recorded on DVD-Video. This unit’s region number is “1”. You cannot play the disc if the region number on the DVD-Video does not correspond to the region number on the unit. You can play discs with labels containing the region number “1” and “ALL”. Read the disc’s instructions carefully. e.g. ∫ Playing DVDs and Video CDs The producer of these discs can control how they are played so you may not always be able to control play as described in these operat- ing instructions. Read the disc’s instructions carefully. ∫ CD-R and CD-RW discsThis unit can play CD-DA (digital audio) and video CD format audio CD-R and CD-RW that have been finalized (a process that enables CD-R/CD-RW players to play audio CD-R and CD-RW) upon com- pletion of recording. It may not be able to play some CD-R or CD-RW due to the condition of the recording. ∫ DVD-R discs Panasonic DVD-R recorded and finalized on a Panasonic DVD video recorder are played as DVD-Video on this unit. It may not be possible to play these discs in all cases due to the type of disc or condition of the recording. 1ALL2 4 1 LogoDisc type DVD-Video DVD-R Audio CD Video CD Indication used in instructions [DVD-V] [CD] (Including CD-R/RW and discs recorded with MP3) [VCD] 8 cm (3q) 12 cm (5q)
Simple setup RQT6191 6 6DISC 12345 120˚ 30˚ 30˚ 3 4 2 5 1 Panasonic Panasonic Simple setup Attaching the speaker feet Attach these speaker feet to prevent vibration causing the speak- ers to move or fall over. If irregular coloring occurs on your televisionThese speakers are designed to be used close to a television, but the picture may be affected with some televisions and setup com- binations. If this occurs, turn the television off for about 30 minutes. The television’s demagnetizing function should correct the problem. If it persists, move the speakers further away from the television.Caution ≥Use the speakers only with the recom- mended system. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if dam- age has occurred or if you experience a sudden change in performance. ≥Do not attempt to attach these speakers to walls using methods other than those de- scribed in this manual. Refer also to “Speaker setup”, a separate guide included with these operating instructions. Use only supplied speakers Using other speakers can damage the unit and sound quality will be negatively affected. Set the speakers up on an even surface to prevent them from falling. Take proper precautions to prevent the speakers from falling if you cannot set them up on an even surface. Front speakers (1 Left 2 Right) SB-AFC95 ≥The left and right speakers are the same. Surround speakers (3 Left 4 Right) SB-AFC95 Place either side of listening position, or slightly to the rear, about 1 meter (3 feet) higher than ear level. ≥The left and right speakers are the same. Center speaker (5) SB-PC89 ≥You can also put this speaker directly under the television. ≥Do not place the center speaker on the main unit as sound quality will be affected. ≥Vibration caused by the center speaker can disrupt the picture if it is placed directly on the television. Put the center speaker on a rack or shelf. Subwoofer (6) SB-W95Place near the television, on the floor or a sturdy shelf so that it won’t cause vibration. ≥A woofer unit is located on the side of the subwoof- er. Leave 10-cm (4q) clearance for it to be effective.Main unitKeep your speakers at least 10 mm (13⁄32q) away from the system for proper ventilation. Place the front, center, and sur- round speakers at approximately the same distance from the seat- ing position. The angles in the dia- gram are approximate. Locating and connecting the speakersSTEP1 Positioning for best effect How you set up your speakers can affect the bass and the sound field. Note the following points. ≥Place speakers on flat secure bases. ≥Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick curtain. Front (12)/surround (34) speakersCenter speaker (5) Laying downStanding
Simple setup 7 RQT6191 Speaker cords Attaching to a wall Front and surround speakers can be attached to a wall. Atttach four speaker feet to each speaker, ensuring they do not cover the holes. Set the speaker onto screws and slide through bracket to lock into position. Note The wall or pillar on which the speakers are to be attached should be capable of supporting 5 kg (11 Ib.) per screw. Attaching to speaker standsEnsure the following conditions are met when you purchase your speaker stands. ≥Observe the diameter and length of the screws and the distance between screws as shown in the diagram. ≥The stands must be able to support over 5 kg (11 lb.). ≥The stands must be stable even if the speakers are in a high position. Attach the stickers to the speaker cords. ≥Attach the numbered stickers to the end of the speaker cords so the numbers match the positions of the speak- ers shown in the diagram. 1 1 FRONT LFRONT L1 1FRONT LFRONT L2 2FRONT RFRONT R3 3SURROUND LSURROUND L4 4SURROUND RSURROUND R5 5CENTERCENTER6 6SUBWOOFERSUBWOOFER 1 1FRONT LFRONT L2 2FRONT RFRONT R3 3SURROUND LSURROUND L4 4SURROUND RSURROUND R5 5CENTERCENTER6 6SUBWOOFERSUBWOOFER1 FRONT L About 10 cm (4") ≥Connect the cords to the terminals of same color so the num- bers on the stickers match the numbers under the terminals. ≥Never short-circuit positive (i) and negative (j) speaker wires. ≥Be sure to connect only positive (red or gray) wires to positive (i) terminals and negative (black or gray with blue stripe) wires to negative (j) terminals. Incorrect connection can damage the speakers. ≥After you have completed setup and connection, wind the ex- cess cord and keep together with string. ≥ The speaker nets cannot be removed. Notes on speaker use≥You can damage your speakers and shorten their useful life if you play sound at high levels over extended periods. RLRL123456 FRONTSURROUND CENTERSUBWOOFER 1 FRONT L 2 FRON T R 5 C ENTER4 SURROUND R3 SURROUND L 6 SUBWOOFER 31 2 Center speakerFront speaker (right) Surround speaker (right)Surround speaker (left) SubwooferFront speaker (left) Twist the vinyl tip and pull off. Gray + Red - Black BlackRed Blue+ Gray (no stripe) - Gray with blue stripe Attach the stands with these holes.5 mm ( 13⁄64q), pitch 0.8 mm ( 1⁄32q) Plate thickness plus 7 to 10 mm (plus 9⁄32q to 25⁄64q) Speaker stand (not included)60 mm (2 23⁄64q) Reduce the volume in the following cases to avoid damage. –When playing distorted sound. –When the speakers are receiving howling from a micro- phone or record player, noise from FM broadcasts, or con- tinuous signals from an oscillator, test disc, or electronic instrument. –When adjusting the sound quality. –When turning the unit on or off. Screw (not included)Speaker feet (included) Speaker feet (included) 30–35 mm (1 3⁄16q–13⁄8q) Ø7.5–9.5 mm ( 19⁄64q–3⁄8q) 7–9 mm ( 9⁄32q–23⁄64q)
Simple setup RQT6191 8 FM ANTAM ANTAC IN~ LOOP ANT HOLDER VIDEO OUT S-VIDEO OUTTV AUDIO IN LOOP EXT 75 ΩGND VIDEO IN 1 2 3 L R 2 1 Simple setup Television, antennas and AC power supply cordSTEP2 Connect directly to your television. Do not connect the unit through a video cas- sette recorder, because the picture may not be played correctly due to the copy guard. Audio cable (not included) Video cable (included) S video cable (not included) Television (not included)Adhesive tape To household AC outlet (AC 120 V, 60 Hz)FM indoor antenna (included) Fix the other end of the antenna where reception is best.AM loop antenna (included) Keep loose antenna cord away from other wires and cords. AC power supply cord (included)AM loop antenna holder (included) To attach to a wall or other surface Screw (included) Note The included AC power supply cord is for use with this unit only. Do not use it with other equipment. Conserving power The unit consumes power (approx. 0.25 W) even when it is turned off with [Í]. To save power when the unit is not to be used for a long time, unplug it from the household AC outlet. Remember to reset the radio stations and any other memory items before using the unit again. For your reference Information you enter into the unit’s memory remains intact for up to a week after the AC power supply cord is disconnected.Turn the antenna to the angle of best reception and least interference. For better images The S-VIDEO OUT terminal achieves a more vivid picture than the VIDEO OUT terminal by separating the chrominance (C) and luminance (Y) signals before transmitting them to the television. (Actual results depend on the television.) To listen to the televi- sion through this unit TV’s S-VIDEO IN terminal TV’s AUDIO OUT terminals
Simple setup 9 RQT6191 The remote controlSTEP3 Remote control only The QUICK SETUP screen appears when you press [SETUP] the first time after purchase and assists you to make necessary settings. Preparation Turn on the television and select the appropriate video input on the television to suit the connections for the player. 1Press [DVD/CD] to turn on the unit.The unit comes on automatically and “DVD/CD” is select- ed as the source. 2Press [SETUP] to show the QUICK SETUP screen. 3Press [3, 4] to select the menu lan- guage and press [ENTER]. 4Press [3, 4] to select “Yes” to con- tinue and press [ENTER]. 5Press [3, 4] to select the item and press [ENTER]. ≥Audio Language (For setting details ➡page 24) ≥Subtitle Language (For setting details ➡page 24) ≥TV Aspect (For setting details ➡below) 6Press [ENTER] and then [SETUP] to end the settings. To return to the previous screen Press [RETURN]. ∫ TV Aspect Select “4:3” (regular) or “16:9” (widescreen) to suit your televi- sion. If you have a regular 4:3 television, you can also select how video on some discs is shown (➡page 24, Video—TV Aspect). ≥4:3 Pan&Scan (Factory preset) The pan and scan (the original widescreen images are converted for viewing on a reg- ular television) version of the video is auto- matically selected if recorded on the disc. ≥4:3 Letterbox The letterbox (the original widescreen im- ages appear with black bands above and below) version of the video is automatically selected if recorded on the disc. ∫Batteries ≥Insert so the poles (i and j) match those in the remote control. ≥Do not use rechargeable type batteries. Do not; ≥mix old and new batteries. ≥use different types at the same time. ≥heat or expose to flame. ≥take apart or short circuit. ≥attempt to recharge alkaline or manganese batteries. ≥use batteries if the covering has been peeled off. Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire. Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place. ∫Use Aim at the sensor, avoiding obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit. 1 4 R6, AA, UM-3 2 3 Quick SetupSTEP4 SELECT SETUPQUICK SETUP Select the menu language. ENTER RETURN English Français EspañolENTER VCR TV TUNER/BANDAUXTV/VIDEOFL DISPLAY TOP MENUMENU SKIP PLAYPAUSE DISC SKIP CHANNEL VOLUME SFCMUTINGSUBWOOFER LEVEL STOP RETURN DISPLAY SLOW /SEARCH DVD/CDMAIN UNIT ANGLE AUDIO SUB TITLESETUP 123 456 789 0 CH SELECTTESTMIX 2ch DISC1 DISC2 DISC4 DISC5DISC3 1 RETURN 3·4·5·6 2·6 SUPER SURROUND MARKER SEAT POSITION CENTER FOCUS PRO LOGIC10/ENTER
Getting started RQT6191 10 POWERVOLUMEDISC 1 2 3 4 5 / I OPEN /CLOSETUNING DISC SKIP MEMORYTUNE MODEFM MODESFCSUBWOOFER LEVELDOWN UP SELECTORPHONES V K Y Z[\U ^`_ab X8 7 WAKE W ] Control reference guide Remote control Page 1Power button [Í] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2FL display button [FL DISPLAY] . . . . . . . . . . . . . . . . . . . . 23 3Top menu button [TOP MENU] . . . . . . . . . . . . . . . . . . . 11, 12 4Cursor buttons [3, 4, 2, 1]/Enter button [ENTER] . . . . . 9 5Display button [DISPLAY] . . . . . . . . . . . . . . . . . . . . . . . . . . 16 6Basic operation buttons 7Disc skip button [DISC SKIP] . . . . . . . . . . . . . . . . . . . . . . . 11 8Sound field control button [SFC] . . . . . . . . . . . . . . . . . . . . 21 9Channel select buttons [ W WW W W, X XX X X, CHANNEL] . . . . . . . . . 19, 26 :Initial settings button [SETUP] . . . . . . . . . . . . . . . . . . . . 9, 25 ;Subtitle button [SUB TITLE] . . . . . . . . . . . . . . . . . . . . . . . . 14 Numbered buttons (1–9, 0, S10/ENTER) . . . . . . . . . . . . . . 11 ?Disc button [DISC] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 @Disc manager button [DISC MANAGER] . . . . . . . . . . . . . . 15 APlay mode button [PLAY MODE] . . . . . . . . . . . . . . . . . . . . 15 BCinema button [CINEMA] . . . . . . . . . . . . . . . . . . . . . . . . . . 13 CTV volume buttons [ s ss s s TV VOL r rr r r] . . . . . . . . . . . . . . . . . . . 26 DPosition memory button [P.MEMORY] . . . . . . . . . . . . . . . 12 E Equipment buttons and indicatorsSelect the equipment you want to operate. ≥Press [DVD/CD] to operate this unit. ≥Press [VCR] to operate a video cassette recorder. ≥Press [TV] to operate a television. These buttons light for a few seconds to indicate the remote control mode. FInput select buttons [DVD/CD, MAIN UNIT, VCR, TV, TUNER/BAND, AUX] Pressing [DVD/CD] or [TUNER/BAND] also turns the unit on. [TUNER/BAND] also switches radio bands. G TV/Video button [TV/VIDEO] . . . . . . . . . . . . . . . . . . . . . . . . .26 HMenu button [MENU] . . . . . . . . . . . . . . . . . . . . . . . . . . . .11, 12 IReturn button [RETURN] . . . . . . . . . . . . . . . . . . . . . . . . 9, 25 JMuting button [MUTING] . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 KSubwoofer level button [SUBWOOFER LEVEL] . . . . . . . . 22 LVolume buttons [ r rr r r, s ss s s, VOLUME] . . . . . . . . . . . . . . . . . 11, 18 MAngle button [ANGLE] . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 NAudio button [AUDIO] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 OMarker button [MARKER] . . . . . . . . . . . . . . . . . . . . . . . . . . 13 PMix 2ch button [MIX 2ch] . . . . . . . . . . . . . . . . . . . . . . . . . . 21 QSound field and effect buttons . . . . . . . . . . . . . . . . . . . 21, 22 RCancel button [CANCEL] . . . . . . . . . . . . . . . . . . . . . . . . . . 13 SRepeat buttons [REPEAT, A-B REPEAT] . . . . . . . . . . . . . 14 TTimer button [TIMER] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Main unit UStandby/on switch [POWER] . . . . . . . . . . . . . . . . . . . . . . . 11Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. Standby/on indicator [Í/I]When the unit is connected to the AC mains supply, this indicator lights red in standby mode and lights green when the unit is turned on. VDisc indicators [DISC 1–5] . . . . . . . . . . . . . . . . . . . . . . . . . 11 WWake timer indicator [WAKE] . . . . . . . . . . . . . . . . . . . . . . . 23 XDisplay YStop, tune mode button [∫, TUNE MODE] . . . . . . . . . 11, 18 ZPause, FM mode button [;, FM MODE] . . . . . . . . . . . 11, 18 [Play, memory button [1, MEMORY] . . . . . . . . . . . . . . 11, 19 \Volume control [VOLUME, DOWN, UP] . . . . . . . . . . . . 11, 18 ]Disc tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 ^Open/close button [< OPEN/CLOSE] . . . . . . . . . . . . . . . . 11 _Skip/search, tuning buttons [:/6, 5/9, X XX X X TUNING W WW W W] . . . . . . . . . . . . . . . 13, 18 `Headphone jack [PHONES] . . . . . . . . . . . . . . . . . . . . . . . . 23 aRemote control signal sensor bInput select button [SELECTOR] . . . . . . . . . . . . . . . . . . . . 11 ENTER VCR TV TUNER/BANDAUXTV/VIDEOFL DISPLAY TOP MENU MENU SKIP PLAYPAUSE DISC SKIP CHANNEL VOLUME SFCMUTINGSUBWOOFER LEVEL STOP RETURN DISPLAY SLOW /SEARCH DVD/CDMAIN UNIT DISC MANAGER ANGLE AUDIO SUB TITLESETUP TV VOL 123 456 789 0 PLAY MODE CH SELECTTESTMIX 2ch DISC1 DISC2 DISC4 DISC5DISC3 CANCEL CINEMA P.MEMORYTIMER DISC 1 2F 3H G 4 5 6 < 7 : 9 @ B DA ? ; =I J 8K > L C E A-B REPEAT SUPER SURROUND MARKER REPEAT SEAT POSITION CENTER FOCUS PRO LOGIC M O N Q R TS P @@@@QPOENTER Buttons 7, 8, and K function the same as the controls on the re- mote control. How to open the remote control